TOOLS (16)

-€48.90

JIMS Inner Cam Bearing Removal Tool — Cam, crankcase, black

Removes inner cam bearings without damaging the crankcase. Prevents rollers from falling into the crankcase. Includes instructions. Made in the United States.

€228.16 €277.06

-€21.65

JIMS Castlenut Socket — for inverted forks, black

Adapts a wrench to remove castle nuts and access the shock cylinder. Made in USA.

€101.04 €122.69

Rod Holder Tool — JIMS kit, Black, Blue, Silver, P/N 1284

-€72.03

JIMS Rod Holder Tool — JIMS kit, Black, Blue, Silver, P/N 1284

Secures rods during reaming or honing of wrist pin bushings. Made in the USA. Fits most V-Twin and Buell Blast applications.

€234.09 €306.12

-€8.67

JIMS Rod Alignment Tool — 114.3 mm (4-1/2"), Silver

Checks rod straightness without removing rods from the cases. Made in the U.S.A.

€40.47 €49.14

MOOSE OFFROAD HARD-PARTS Retractable Ratcheting Tie Down — 10', 1", 400 lb, Black

Quick push-button retracting ratchet stores excess webbing inside the housing for a clean, secure setup; zinc-plated metal components with a plastic-coated handle for comfortable use.

€49.15

MOOSE OFFROAD HARD-PARTS Retractable Ratcheting Tie Down — 10' (305 cm), 400 lb...

Quick, retracting ratchet straps that keep excess webbing contained. 400 lb working load limit; 1,200 lb breaking strength.

€49.15

-€36.05

JIMS Alternator Rotor Tool — 45A

Must-have puller for 45A charging systems; protects sprocket shaft threads and works with Harley-Davidson® alternators.

€168.27 €204.32

MOOSE OFFROAD HARD-PARTS Retractable Ratcheting Tie Down — 10' (305 cm), 181 kg (400...

Retracting ratchets set up in seconds and keep excess webbing neatly housed; zinc-plated metal components and plastic-coated handle.

€49.15

-€21.65
Out of Stock

JIMS Optional Seal Driver — Main shaft, Transmission, 4-Speed, Black

Optional drivers for use with the primary seal installation tool to help install seals.

€101.04 €122.69

Brake Caliper Piston Remover — Front and rear 4-piston calipers, gray, red

-€24.90
Out of Stock

JIMS Brake Caliper Piston Remover — Front and rear 4-piston...

Removes and holds caliper pistons square for safe seal and wiper installation on 4-piston front and rear calipers.

€116.24 €141.14

-€69.37

JIMS Wrist Pin Bushing Reaming Tool — wrist pin, Gray

Reams wrist pin bushings to the proper inner diameter. Use with rods in or out of the motor; lead-in taper for easy entry.

€323.69 €393.06

-€79.88

JIMS Wrist Pin Bushing Reaming Tool — Gray

Reams wrist pin bushings to the correct inner diameter. Use with rods in or out of the motor. Lead-in taper for easy alignment. Made in the U.S.A.

€372.80 €452.68

-€23.18

JIMS Fork Seal and Cap Installer — 39 mm fork tube, black

Seats seals and caps without scratching tubes. Lightly grease contact surfaces before use. Made in the U.S.A.

€108.19 €131.37

Exhaust Stud Drill Plate — Blue, anodized

-€34.51

JIMS Exhaust Stud Drill Plate — Blue, anodized

Positions exhaust port seals evenly and works with exhaust flange nuts. Made in the U.S.A.

€161.05 €195.56

-€23.61
Out of Stock

JIMS Hardware Organizer M8 — Blue

Milwaukee Eight specific hardware organizer that indexes bolts, aids Loctite application, and includes a magnetic tray; made in the USA.

€110.15 €133.76

MOOSE OFFROAD HARD-PARTS Shock Spanner Tool — Shock

Tool for adjusting hard-to-reach rear shock lockout collars; brass-tipped, curved tip, heavy-duty handle.

€26.60

-€43.35

JIMS Big Twin Cam Seal Tool — Camshaft, Black

Simple tool to install or remove cam seals without removing the cam cover. Presses new seal square and flat. Made in the U.S.A.

€202.27 €245.62

-€25.95

MOOSE OFFROAD HARD-PARTS Pinion Bearing Tool — Black

Removes and reinstalls the pinion bearing nut in Yamaha differentials for precise, damage-free service.

€56.00 €81.95

-€22.72

MOOSE OFFROAD HARD-PARTS Pinion Bearing Lock Nut Tool — black

Removes and reinstalls 4-prong pinion bearing lock nuts on Yamaha 4-wheelers.

€50.00 €72.72

-€54.63

JIMS Rocker Bushing and Roller Bearing Puller — Rocker box, Black

Removes rocker bushings and roller bearings in a single operation. Made in the U.S.A.

€254.89 €309.52

-€20.93

JIMS Oil Pump Snap Ring Installer — Black

Tool for installing the outer snap ring on oil pump shafts; prevents over-stretching and speeds assembly. Made in the U.S.A.

€97.72 €118.65

-€28.29

JIMS Oil Pump Seal Installer — Oil System, Black

Installs oil pump seals below the gear surface for a leak-free fit. Fits Big Twin aluminum oil pumps (except Twin Cam/M8). Made in the U.S.A.

€132.01 €160.30

Ball Joint Removal Tool — A-Arm front suspension, Black

-€15.17

MOOSE OFFROAD HARD-PARTS Ball Joint Removal Tool — A-Arm front suspension, Black

Removes and installs ball joints using a standard shop press without damaging control arms or the joint. Fits 2008 and newer ATVs and UTVs with arm-style front suspension.

€35.00 €50.17

-€22.37

JIMS Clutch Spring Tool — Black

Releases clutch spring tension for easy disassembly. Made in the U.S.A.

€104.36 €126.73

Universal Bearing Driver Tool Set — 8–47 mm adaptors, 8–30 mm ID / 32–47 mm OD, Black

-€44.40

MOOSE OFFROAD HARD-PARTS Universal Bearing Driver Tool Set — 8–47 mm adaptors, 8–30 mm...

Compact set with one durable handle and 12 anodized aluminum adaptors (8–47 mm); blow-molded case; use with hammer or press.

€97.00 €141.40

-€46.44

JIMS Pulley Locker — Transmission, Blue

Locks the pulley for removal or installation of the pulley nut. Made in the U.S.A.

€216.69 €263.13

MOOSE OFFROAD HARD-PARTS Spanner Wrench for WP Forks — KTM 48 mm WP forks, Blue

4-pin spanner wrench for KTM 48 mm WP forks. Slim design for cap removal without removing handlebars. Comfort handle.

€17.37

MOOSE OFFROAD HARD-PARTS Dual-Chamber Closed Cartridge Fork Cap Tool — Red

12.5 mm slot holds the damper rod to remove the rebound bolt; for removing fork caps on dual-chamber cartridge forks; fits most Honda (except '10 CRF250R) and Yamaha motorcycles.

€27.62

-€10.88

JIMS Crankshaft Guide — Crankcase, Gray

Spreads the pinion bearing rollers for right-side case reassembly. Made in the U.S.A.

€50.76 €61.64

Dual-Chamber Closed Cartridge Fork Cap Tool — WP 4860 MXMA, Red, Silver

MOOSE OFFROAD HARD-PARTS Dual-Chamber Closed Cartridge Fork Cap Tool — WP 4860 MXMA,...

Secures the damper rod with a 12 mm slot; fits WP 4860 MXMA dual‑chamber closed cartridges; removes the fork cap.

€27.62

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS