HARLEY

-€4.60
Out of Stock

NAMZ Ground Loop Isolator — Black

Inline audio isolator reduces hum from ground loops; features RCA jacks and U.S. manufacture.

€13.82 €18.42

-€3.58
Out of Stock

DRAG SPECIALTIES Die-Cast Cable Clamp — Silver

Economical alternative to billet clamps.

€10.11 €13.69

-€2.70
Out of Stock

HOGTUNES Audio Cable — Stereo, Black

1-meter stereo audio cable with 90° ends; gold-plated connectors; connects MP3/satellite/GPS to the aux in.

€7.63 €10.33

-€54.16
Out of Stock

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for Burly Ape hangers. Includes extended brake line (when noted), extended clutch and throttle cables, plus all required wiring. Brake lines feature PTFE inner liner and stainless steel braid. Dresser kits reuse the stock Throttle-By-Wire harness.

€210.64 €264.80

-€12.52
Out of Stock

KURYAKYN Billet Antenna — 12" L, Chrome

Precision-machined construction with an over-molded spring base; 12" L direct OEM replacement. AM/FM reception only.

€48.69 €61.21

-€1,212.13
Out of Stock

S&S CYCLE Top End Kit — 3-7/16" bore, 74 cu in, 8.0:1

Complete S&S top-end kit includes heads, stock-bore cylinders, pre-fit forged 8:1 pistons with rings and wrist pins, clamps, seals, hardware and gaskets. Minimal machine work required.

€3,425.64 €4,637.77

-€723.44
Out of Stock

S&S CYCLE Top End Kit — 3-1/2" bore, 80", 8.0:1

Complete top-end kit with S&S Shovelhead-style heads, stock-bore cylinders, pre-fit forged pistons, hardware and gaskets. Made in USA.

€2,813.38 €3,536.82

4-1/8" Bore Cylinder — 4.125" bore, 4.625" stroke, for '99-'17 Twin Cams, Black powder-coated

-€213.62
Out of Stock

S&S CYCLE 4-1/8" Bore Cylinder — 4.125" bore, 4.625" stroke, for '99-'17...

Bored slightly under nominal and supplied un-honed with a stock bolt pattern; made for 124" Hot Set Up Kits on '99-'17 Twin Cams. Requires crankcase machining.

€830.76 €1,044.38

-€12.03
Out of Stock

EASTERN MOTORCYCLE PARTS Rocker Box Stud Kit — 8 Pack

Includes eight long studs, two short studs and one top motor mount stud. One kit required per head.

€34.00 €46.03

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Ape Hanger, standard height, natural clear-coated

-€81.10
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Standard kit includes correct-length clutch and brake lines, chrome T junction, fittings and copper crush washers. Electrical wire extensions sold separately. Designed for 2" risers and Ape Hanger handlebars. Made in the U.S.A.

€315.36 €396.46

-€5.21
Out of Stock

EASTERN MOTORCYCLE PARTS Top Motor Mount Studs — 4 pack

Durable mounting hardware delivers secure clamping, corrosion resistance, and precise fit. Made in the U.S.A.

€14.74 €19.95

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Ape Hanger, 12"–14"

-€81.10
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Plug-and-play braided cable and brake line kit including clutch and brake lines, chrome "T" junction, banjo bolts, fittings and copper crush washers. Based on 2" risers with Ape Hanger handlebars.

€315.36 €396.46

-€9.63
Out of Stock

CIRO Antenna — Chrome, for Harley-Davidson

Bullet-style sleek replacement for whip antennas
OEM-equivalent AM/FM/WB reception
Easy bolt-on to OEM mount; flexible rubber base

€37.43 €47.06

Standard Stainless Braided Handlebar Cable/Brake Line Kit — 15"–17" riser fit, Ape Hanger

-€81.10
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete kit includes correct-length brake and clutch lines, wire extensions, T-junction, banjo bolts, fittings and copper crush washers. Electrical wire extensions sold separately. Made in the U.S.A.

€315.36 €396.46

Replacement Cylinders for XL Evolution-Style Motors — 1200 cc, 3.5" , Black

-€85.70
Out of Stock

DRAG SPECIALTIES Replacement Cylinders for XL Evolution-Style Motors — 1200 cc,...

Ductile cast-iron sleeved cylinders pressed into aluminum castings. Sleeve ribs lock to the casting; finished slightly undersized for final honing. Ideal for stock replacement.

€242.22 €327.92

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Ape Hanger, 18"–20" riser fit, Stainless steel

-€81.10
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete braided handlebar cable and brake line kit with correct-length hoses, T junction, banjo bolts and fittings; electrical extensions sold separately.

€315.36 €396.46

Standard Stainless Braided Handlebar Cable/Brake Line Kit — 2" risers, Ape Hanger, stainless steel, clear-coated natural

-€128.89
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit — 2"...

Complete handlebar-swap kit with correct-length brake and clutch lines, T-junction, banjo bolts, fittings and copper crush washers. Electrical extensions sold separately.

€501.24 €630.13

-€9.63
Out of Stock

CIRO Antenna — Chrome, fits Harley-Davidson®

Bullet-style radio antenna — sleek, sturdy upgrade over long whip antennas; mounts to OEM factory mount, flexible rubber base reduces breakage; AM, FM and WB reception.

€37.43 €47.06

Replacement Cylinder & Piston for S&S 106" Stroker Kit — 106", 3.875" bore, 4.5" stroke, Powder-Coated Wrinkle Black

-€325.00
Out of Stock

S&S CYCLE Replacement Cylinder & Piston for S&S 106" Stroker Kit — 106",...

Replacement cylinder and piston kit for S&S 106" stroker engines. Includes cylinders, forged pistons, rings, wrist pins, and head and base gaskets. Only for 88" motors. Requires a skilled technician.

€1,266.39 €1,591.39

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Fits 12"–14" handlebar height, Ape Hanger

-€128.89
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete stainless braided cable and brake line kit includes clutch line, brake lines, T junction, fittings and copper crush washers. Made in the U.S.A.

€501.24 €630.13

Antenna — Fits Harley‑Davidson®, Black anodized

-€9.87
Out of Stock

CIRO Antenna — Fits Harley‑Davidson®, Black anodized

Bullet-style replacement preserves AM/FM/WB reception, screws onto the OEM mount, and resists breakage.

€38.40 €48.27

Standard Stainless Braided Handlebar Cable/Brake Line Kit — 15"–17" handlebar height, Ape Hanger, Non-ABS

-€128.89
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete kit with correct-length clutch and brake lines, chrome T junction, banjo bolts, fittings and copper crush washers. Includes wire extensions; electrical wire extensions sold separately. Made in the U.S.A.

€501.24 €630.13

-€5.11
Out of Stock

NAMZ Antenna — Harley Davidson®, Black

Replacement antenna for models with a radio antenna. Plug-n-play installation.

€15.33 €20.44

Big Bore Cylinder Kit — 95 cu in, 3.875 in bore, 4.0 in stroke, Silver

-€296.17
Out of Stock

S&S CYCLE Big Bore Cylinder Kit — 95 cu in, 3.875 in bore, 4.0 in...

High-quality Big Bore cylinder kit that installs without splitting cases. Includes cylinders, pistons, rings and gaskets; made in the USA.

€1,151.75 €1,447.92

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Fits 18"–20" (45.5–51 cm), Ape Hanger

-€128.89
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete kit with correct-length brake and clutch lines, chrome T junction, fittings and crush washers; electrical extensions sold separately.

€501.24 €630.13

Standard Stainless Braided Handlebar Cable/Brake Line Kit — 38–43 cm (15"–17"), Ape Hanger, Silver clear-coated

-€129.96
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Simplifies handlebar swaps: includes correctly sized control lines, wire extensions, chrome T-junction, banjo bolts, fittings and copper crush washers. Electrical wire extensions sold separately.

€505.41 €635.37

Standard Stainless Braided Handlebar Cable/Brake Line Kit — 18"–20" handlebar height, Ape Hanger, stainless steel housing

-€129.96
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete braided cable and brake line kit with correct-length lines, fittings and hardware to simplify handlebar swaps. Electrical wire extensions sold separately.

€505.41 €635.37

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Fits standard handlebar height, stainless steel housing, non-ABS

-€98.29
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete handlebar cable and brake line kit for handlebar swaps. Includes clutch line, brake lines, chrome "T" junction, banjo bolts, fittings and copper crush washers. Electrical extensions sold separately. Made in the U.S.A.

€382.19 €480.48

Big Bore Cylinder Kit — 3.927" bore, 4.000" stroke, 97 cu in, Silver

-€281.61
Out of Stock

S&S CYCLE Big Bore Cylinder Kit — 3.927" bore, 4.000" stroke, 97 cu in,...

Big Bore Cylinder Kit. Easy swap installation; includes cylinders, pistons, rings and gaskets. Made in the USA. Requires a skilled technician.

€1,095.10 €1,376.71

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Standard fit, Beach Bar, Non-ABS, Natural clear-coated

-€98.29
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete kit with correct-length lines, chrome T junction, fittings and hardware — based on 2" risers for Ape Hanger installs. Made in the U.S.A.

€382.19 €480.48

shop by category

HARLEY

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

HARLEY

Subcategories

HARLEY