HARLEY

Rectangular Mirror with Air Stem — 4-1/8" x 2-7/8", 5/16"-18, 6" stem, Chrome

Out of Stock

DRAG SPECIALTIES Rectangular Mirror with Air Stem — 4-1/8" x 2-7/8", 5/16"-18,...

Universal rectangular side-view mirror with die-cast construction; reversible for right or left mounting. Includes mounting hardware.

€24.91

Out of Stock

DRAG SPECIALTIES Die-Cast Cable Clamp — Silver

Economical alternative to billet clamps.

€9.79

Out of Stock

ADIGE Tire Lock — 1.60" rim width, Each

Soft-covered locks that protect rims, prevent tire slip, and are chosen by leading motorcycle manufacturers. Available for front and rear; sold individually.

Out of Stock

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" clamping diameter, Black gloss

Billet aluminum clamp that strengthens risers, supports sized-down and 1" handlebars, and fits 3-1/2" on-center risers.

€73.79

$Gothic Mirror with Sculptured Stem — 14 cm (5.5\") head, 15 cm (6\") stem, 5/16\"-18 thread, Chrome, Silver$

Out of Stock

DRAG SPECIALTIES Gothic Mirror with Sculptured Stem — 14 cm (5.5\") head, 15 cm...

Die-cast construction; includes mounting hardware. Requires mirror adapter DS-302148/DS-302149/0641-0096/0641-0097.

€37.58

Out of Stock

LA CHOPPERS Handlebar Clamp Set — 1" clamping diameter, raw finish

CNC-machined 6061-T6 aluminum handlebar clamp set with all installation hardware included; fits under the stock cover for a clean installation.

€125.37

Gothic Mirror with Sculptured Stem — 5/16"-18, 6" stem, Chrome

Out of Stock

DRAG SPECIALTIES Gothic Mirror with Sculptured Stem — 5/16"-18, 6" stem, Chrome

Gothic styling with die-cast construction and included mounting hardware. Requires specific mirror adapters.

€35.60

Out of Stock

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for Burly Ape hangers. Includes extended brake line (when noted), extended clutch and throttle cables, plus all required wiring. Brake lines feature PTFE inner liner and stainless steel braid. Dresser kits reuse the stock Throttle-By-Wire harness.

€203.90

Out of Stock

LA CHOPPERS Handlebar Clamp Set — 1-1/4" clamp, tapped 1/2"-13, raw finish

Fits under the stock cover; includes installation hardware and set screws; CNC-machined alloy construction; tapped for 1/2"-13 riser bolts; top clamp locks handlebars.

€125.37

Buffalo Handlebar Clamp — 1" clamping diameter, fits 3-1/2" on-center risers, black flat finish

Out of Stock

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" clamping diameter, fits 3-1/2"...

Billet aluminum clamp that covers the full clamping area of 1-1/4" handlebars sized down to 1"; fits 1" handlebars and mounts to 3-1/2" on-center risers.

€53.83

Flame Teardrop Mirrors with Sculptured Stem — Head 64 mm, Width 5-1/4", Stem 6", Screw-In, Chrome/Silver

Out of Stock

DRAG SPECIALTIES Flame Teardrop Mirrors with Sculptured Stem — Head 64 mm,...

Teardrop mirrors with 3-D surface flames and sculptured stem; mounting hardware included.

€78.01

Out of Stock

DRAG SPECIALTIES Handlebar Clamp — 1", Chrome

Die-cast clamp fits most '74-'17 models with 3-1/2" on-center risers; fits 1" OD bars. Sold each.

€17.08

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Ape Hanger, standard height, natural clear-coated

Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Standard kit includes correct-length clutch and brake lines, chrome T junction, fittings and copper crush washers. Electrical wire extensions sold separately. Designed for 2" risers and Ape Hanger handlebars. Made in the U.S.A.

€305.27

Out of Stock

K&L SUPPLY Wheel Weights — 10 pack, 30 g (1 oz.), crimp-on, raw silver

Helps balance tires to prevent uneven wear and tear. Made in Japan.

Lance Style Die-Cast Mirror — 5/16"-18 thread, 1-7/8" head, 5-1/8" width, 6" stem

Out of Stock

DRAG SPECIALTIES Lance Style Die-Cast Mirror — 5/16"-18 thread, 1-7/8" head,...

Diamond-shaped Lance-style mirror with die-cast construction. Mounting hardware included for easy installation. Clean, vintage-inspired styling.

€47.26

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Ape Hanger, 12"–14"

Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Plug-and-play braided cable and brake line kit including clutch and brake lines, chrome "T" junction, banjo bolts, fittings and copper crush washers. Based on 2" risers with Ape Hanger handlebars.

€305.27

Flame Style Die-Cast Mirrors — 5/16"-18, 6" stem, Chrome

Out of Stock

DRAG SPECIALTIES Flame Style Die-Cast Mirrors — 5/16"-18, 6" stem, Chrome

Die-cast flame-style mirrors with included mounting hardware and durable construction.

€81.88

Standard Stainless Braided Handlebar Cable/Brake Line Kit — 15"–17" riser fit, Ape Hanger

Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete kit includes correct-length brake and clutch lines, wire extensions, T-junction, banjo bolts, fittings and copper crush washers. Electrical wire extensions sold separately. Made in the U.S.A.

€305.27

Wheel Weights — 10-pack, 20 g (0.7 oz), Crimp On, Raw/Silver

Out of Stock

K&L SUPPLY Wheel Weights — 10-pack, 20 g (0.7 oz), Crimp On, Raw/Silver

Helps balance tires to reduce uneven wear. Made in Japan.

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Ape Hanger, 18"–20" riser fit, Stainless steel

Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete braided handlebar cable and brake line kit with correct-length hoses, T junction, banjo bolts and fittings; electrical extensions sold separately.

€305.27

Wheel Weights — Crimp On, 30 g (1 oz), 10-pack, Silver

Out of Stock

K&L SUPPLY Wheel Weights — Crimp On, 30 g (1 oz), 10-pack, Silver

Helps balance tires to prevent uneven wear and tear. Made in Japan.

Standard Stainless Braided Handlebar Cable/Brake Line Kit — 2" risers, Ape Hanger, stainless steel, clear-coated natural

Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit — 2"...

Complete handlebar-swap kit with correct-length brake and clutch lines, T-junction, banjo bolts, fittings and copper crush washers. Electrical extensions sold separately.

€485.20

T-Bar Handlebar Clamp Mount Kit — Chrome, 3-1/2" bolt centers, 4-3/4" hole centers

Out of Stock

PAUGHCO T-Bar Handlebar Clamp Mount Kit — Chrome, 3-1/2" bolt centers,...

Mounting kit for T-bar clamp; fits most handlebars or risers with 3-1/2" bolt centers and most Springer top trees with 4-3/4" hole centers. Made in the USA.

€74.23

Billet Aluminum Mirror — 69.85 mm (2-3/4") head, screw-in mount

Out of Stock

PRO-ONE PERF.MFG. Billet Aluminum Mirror — 69.85 mm (2-3/4") head, screw-in mount

Includes all necessary hardware for fitment on most custom, stock Harley and metric cruisers; hides rear adjustment screws and uses a stainless pivot on a nylon bushing for smooth movement.

€105.42

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Fits 12"–14" handlebar height, Ape Hanger

Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete stainless braided cable and brake line kit includes clutch line, brake lines, T junction, fittings and copper crush washers. Made in the U.S.A.

€485.20

Billet Aluminum Mirror — 7-1/8" head, 7-3/4" stem, Screw-in mount, Chrome

Out of Stock

PRO-ONE PERF.MFG. Billet Aluminum Mirror — 7-1/8" head, 7-3/4" stem, Screw-in...

Precision-milled billet aluminum mirror for custom and stock Harley or metric cruisers. Includes necessary hardware; smooth stainless-steel pivot.

€105.42

Standard Stainless Braided Handlebar Cable/Brake Line Kit — 15"–17" handlebar height, Ape Hanger, Non-ABS

Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete kit with correct-length clutch and brake lines, chrome T junction, banjo bolts, fittings and copper crush washers. Includes wire extensions; electrical wire extensions sold separately. Made in the U.S.A.

€485.20

$1-1/2\" Big Buffalo Riser Top Clamp — 1-1/2\" (38 mm), Chrome$

Out of Stock

DRAG SPECIALTIES 1-1/2\" Big Buffalo Riser Top Clamp — 1-1/2\" (38 mm), Chrome

One-piece billet top clamp with show-chrome finish for Drag Specialties 1-1/2\" Big Buffalo bars. Chrome end caps included; solid clamp sold separately.

€74.79

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Fits 18"–20" (45.5–51 cm), Ape Hanger

Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete kit with correct-length brake and clutch lines, chrome T junction, fittings and crush washers; electrical extensions sold separately.

€485.20

Top Handlebar Clamp for 1-1/4" Handlebars — 1-1/4" (32 mm), polished chrome

Out of Stock

LA CHOPPERS Top Handlebar Clamp for 1-1/4" Handlebars — 1-1/4" (32 mm),...

Top clamp for 1-1/4" handlebars with polished chrome finish. Fits L.A. Choppers and similar bars. Sold as a pair.

€73.46

shop by category

HARLEY

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

HARLEY

Subcategories

HARLEY