HARLEY

High Performance Battery — 12 V, 7 Ah, 133×134×76.2 mm, negative terminal right front

DRAG SPECIALTIES BATTERIES High Performance Battery — 12 V, 7 Ah

Specifically designed for high-performance engines; radial grid for maximum cranking amps; brass spacers and stainless hardware; high vibration resistance; acid not included; not spill-proof; charge monthly when stored.

€54.25

Rear Master Cylinder Cover Gasket — Master cylinder, rear

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket

High-quality replacement cover seal that helps prevent fluid leaks and restores proper sealing.

€4.88

KURYAKYN Extended Brake Pedal

Moves the brake pedal forward and down to flatten the pad angle for a more natural foot position; bronze bushing; for floorboard-equipped bikes; sold each.

€95.00

CHRIS PRODUCTS Rear Turn Signal Hardware

Direct OEM replacement mounting hardware in two finishes for motorcycle lighting assemblies.

AGM Maintenance-Free Battery — 12V 12Ah, 200 A CCA, 152.4×87.3×145 mm

YUASA AGM Maintenance-Free Battery — 12 V, 12 Ah

Maintenance-free AGM battery with sealed design for reliable starting and vibration resistance.

€112.03

Braided Spark Plug Wire — 8 mm, 165 mm (6-1/2"), Chrome

MAGNUM SHIELDING Braided Spark Plug Wire

High-voltage silicone spark plug wire with heavy-walled FEP insulation, posi-lock terminals, OE direct fitment, made in the USA.

€53.54

Rear Master Cylinder Cover Gasket — rubber, 77360

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket

High-quality replacement cover seal that restores a reliable, leak-free fit for the hydraulic cover.

€5.72

CHRIS PRODUCTS Rear Turn Signal Brackets — Mount

Rear Turn Signal Brackets available in chrome or black nickel finish, designed as direct OEM replacements.

€8.30

Shift Rod Extension — 51 mm (2") longer, 7.9 mm stud, chrome

CYCLE VISIONS Shift Rod Extension — Silver, 51 mm (2") Longer

Extends any OEM or custom shift rod with 5/16"-24 threads. Made in the U.S.A.

€21.68

CHRIS PRODUCTS Turn Signal Standoff

Redesigned to accommodate new wiring configurations; provides secure mounting and easy installation.

€10.22

Shifter Shaft Cap — Polished chrome, aluminum

DRAG SPECIALTIES Shifter Shaft Cap — Silver

Die-cast aluminum cap with polished chrome finish. Fits FL and FXD/FLHR/FLHX/FLTRX/FLTRU and FL Trike mid-control models with forward controls. Mounts with a setscrew to protect your boot.

€6.71

MAGNUM SHIELDING Braided Spark Plug Wire

High-voltage, high-temperature ignition cable with heavy-walled FEP outer insulation and Posi-lock terminals for OE direct fitment.

€53.54

Handguard LED Light Kit — 12V, 8W, Star Series

POWERMADD Handguard LED Light Kit — 12 V

Snap-in lighting modules that boost peripheral visibility and can be wired via the included waterproof switch. 200 lumens per module.

€42.97

1200cc Conversion Kit for XL883 — 1200 cc, 3.500 in, Silver

S&S CYCLE 1200cc Conversion Kit for XL883 — Silver

Ready-to-assemble cylinders and pistons with rings and gaskets; eliminates machining and head changes. Designed for use with 883 heads.

€729.73

Diamond-Style Light Kits — 146 mm (5-3/4"), 12 V, 55 W, Halogen

DRAG SPECIALTIES Diamond-Style Light Kits — 12 V

Diamond-style reflector light kit replaces older-style lights and includes a bulb and wiring for straightforward installation; fits most housings.

€30.69

Braided Spark Plug Wire — 8 mm, 248 mm (9-3/4"), 90°, Chrome

MAGNUM SHIELDING Braided Spark Plug Wire

Braided OE-style spark plug wires with high-voltage silicone construction, FEP outer insulation, posi-lock terminals, and OE direct fitments — made in USA.

€53.54

$Battery Cable — 4 AWG, 127 mm (5\"), Ring terminal, Black$

TERRY COMPONENTS Battery Cable

Flexible silicone jacket for easy routing and long life. 99.9% electrolytic copper lug for a secure, conductive connection. Delivers strong cranking power with minimal voltage drop. Made in the USA.

€17.94

1200cc Conversion Kit for XL883 — 1200 cc, 3.500 in bore, 9.4:1, powder-coated wrinkle black

S&S CYCLE 1200cc Conversion Kit for XL883

Quick-fit pistons and premium aluminum cylinders with iron liners. Ready to assemble; no machining or re‑balancing required. Kit includes pistons, rings and gaskets. Must be used with 883 heads.

€843.80

Red and Clear Skull Taillight — 63.5 mm H, 12.5 cm L, 63.5 mm W, Red/Clear lens, Chrome housing

DRAG SPECIALTIES Red and Clear Skull Taillight

Skull-style taillight with die-cast frame for durable custom styling.

€34.00

Replacement Taillight Lens — Clear/Red, Rear, P/N 12-0401

DRAG SPECIALTIES Replacement Taillight Lens

Top-quality replacement component for motorcycle lighting. Durable construction for reliable performance and simple installation.

€16.32

Braided Spark Plug Wire — 8 mm, 184 mm (7-1/4"), Chrome

MAGNUM SHIELDING Braided Spark Plug Wire

High-voltage braided spark plug wires with FEP insulation, Posi-lock terminals and OE direct fit. Made in USA.

€53.54

Braided Spark Plug Wire — 8 mm, 50 cm (19-3/4") , Chrome

MAGNUM SHIELDING Braided Spark Plug Wire

High-voltage, high-temperature ignition cable with crystal-clear fluoropolymer insulation, posi-lock terminals, OE direct fit, made in the USA.

€53.54

$3\" Foot Control Extension Kit — 76.2 mm (3\") forward, Forward Control$

ARLEN NESS 3\" Foot Control Extension Kit — Black, +76,2 mm (+3") Forward

Moves OEM foot controls forward for improved comfort; includes all hardware for installation and uses stock footpegs.

€182.71

Laydown Taillight Lens with Bottom Tag Lens — Red, Laydown mount, Rear

DRAG SPECIALTIES Laydown Taillight Lens with Bottom Tag Lens

Smooth, low‑profile lens that matches OEM rear angles and gives a clean custom look; requires LED bulb.

€19.23

Bullet Marker Lights — 3" L x 1" dia, front mount, amber lens, chrome housing

PRO-ONE PERF.MFG. Bullet Marker Lights

Supplemental bullet-style marker lights intended to supplement stock turn signals; not for use as running lights.

€42.77

Ignition Sensor Assembly — Harley Davidson®, Black, Gray

STANDARD MOTOR PRODUCTS Ignition Sensor Assembly

Includes pickup, mounting plate and wires with connectors.

€45.52

Replacement Cylinder for Evolution Motors — 3.500" bore, 1340 cc, Black

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — Black, Silver

Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.

€234.40

Ignition Sensor Assembly — For Harley-Davidson, Black, Gray

STANDARD MOTOR PRODUCTS Ignition Sensor Assembly

Complete assembly includes pickup, mounting plate and pre-wired connectors for straightforward installation.

€45.52

PAUGHCO Distributor Hold Down

Single-bolt distributor clamp compatible with most aftermarket distributors. Made in the USA.

€16.76

Cylinder Kit — 3.625" bore, 4.250" stroke

S&S CYCLE Cylinder Kit

Complete cylinder kit with front and rear cylinders, gaskets and fasteners. 3.625" bore cylinders require crankcase machining.

€896.03

shop by category

HARLEY

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

HARLEY

Subcategories

HARLEY