Specifically designed for high-performance engines; radial grid for maximum cranking amps; brass spacers and stainless hardware; high vibration resistance; acid not included; not spill-proof; charge monthly when stored.
+34 959 05 75 47 / +34 636 847 491
HARLEY
Subcategories
Active filters
DRAG SPECIALTIES BATTERIES
High Performance Battery — 12 V, 7 Ah, 133×134×76.2 mm,...
€56.05
Regular price
€79.88
DRAG SPECIALTIES
Rear Master Cylinder Cover Gasket — Master cylinder, rear
High-quality replacement cover seal that helps prevent fluid leaks and restores proper sealing.
€5.05
Regular price
€6.83
KURYAKYN
Extended Brake Pedal — Chrome, Each
Moves the brake pedal forward and down to flatten the pad angle for a more natural foot position; bronze bushing; for floorboard-equipped bikes; sold each.
€98.14
Regular price
€123.37
KHROME WERKS
Handlebar ETC Grip Extension — Raw finish
Plugs ETC notches for TBW handlebars so TBW bars can be used on non-TBW models; evens left and right; made in the U.S.A.
€13.30
Regular price
€16.71
YUASA
AGM Maintenance-Free Battery — 12V 12Ah, 200 A CCA,...
Maintenance-free AGM battery with sealed design for reliable starting and vibration resistance.
€115.74
Regular price
€166.97
MAGNUM SHIELDING
Braided Spark Plug Wire — 8 mm, 165 mm (6-1/2"), Chrome
High-voltage silicone spark plug wire with heavy-walled FEP insulation, posi-lock terminals, OE direct fitment, made in the USA.
€55.31
Regular price
€70.03
DRAG SPECIALTIES
Rear Master Cylinder Cover Gasket — rubber, 77360
High-quality replacement cover seal that restores a reliable, leak-free fit for the hydraulic cover.
€5.91
Regular price
€8.00
DRAG SPECIALTIES
Buffalo Handlebar Clamp — 1" (25.4 mm), Aluminum, Black Gloss
Billet aluminum clamp that strengthens risers and improves control. Covers 1-1/4" clamping area sized down to 1" and fits 3-1/2" on-center risers. Made in USA.
€51.75
Regular price
€70.06
CYCLE VISIONS
Shift Rod Extension — 51 mm (2") longer, 7.9 mm stud, chrome
Extends any OEM or custom shift rod with 5/16"-24 threads. Made in the U.S.A.
€22.40
Regular price
€28.16
DRAG SPECIALTIES
Shifter Shaft Cap — Polished chrome, aluminum
Die-cast aluminum cap with polished chrome finish. Fits FL and FXD/FLHR/FLHX/FLTRX/FLTRU and FL Trike mid-control models with forward controls. Mounts with a setscrew to protect your boot.
€6.93
Regular price
€9.38
MAGNUM SHIELDING
Braided Spark Plug Wire — 8 mm, Chrome
High-voltage, high-temperature ignition cable with heavy-walled FEP outer insulation and Posi-lock terminals for OE direct fitment.
€55.31
Regular price
€70.03
S&S CYCLE
1200cc Conversion Kit for XL883 — 1200 cc, 3.500 in, Silver
Ready-to-assemble cylinders and pistons with rings and gaskets; eliminates machining and head changes. Designed for use with 883 heads.
€753.85
Regular price
€947.70
MAGNUM SHIELDING
Braided Spark Plug Wire — 8 mm, 248 mm (9-3/4"), 90°, Chrome
Braided OE-style spark plug wires with high-voltage silicone construction, FEP outer insulation, posi-lock terminals, and OE direct fitments — made in USA.
€55.31
Regular price
€70.03
TERRY COMPONENTS
Battery Cable — 4 AWG, 127 mm (5\"), Ring terminal, Black
Flexible silicone jacket for easy routing and long life.
99.9% electrolytic copper lug for a secure, conductive connection.
Delivers strong cranking power with minimal voltage drop.
Made in the USA.
€18.53
Regular price
€25.09
S&S CYCLE
1200cc Conversion Kit for XL883 — 1200 cc, 3.500 in bore,...
Quick-fit pistons and premium aluminum cylinders with iron liners. Ready to assemble; no machining or re‑balancing required. Kit includes pistons, rings and gaskets. Must be used with 883 heads.
€871.69
Regular price
€1,093.11
MAGNUM SHIELDING
Braided Spark Plug Wire — 8 mm, 184 mm (7-1/4"), Chrome
High-voltage braided spark plug wires with FEP insulation, Posi-lock terminals and OE direct fit. Made in USA.
€55.31
Regular price
€70.03
DRAG SPECIALTIES
Handlebar Clamp — 1" clamping diameter, fits '74–'17 models,...
Die-cast clamp for most '74–'17 models with 3-1/2" on-center risers and offset mounting holes. Fits 1" OD bars.
€19.85
Regular price
€26.88
MAGNUM SHIELDING
Braided Spark Plug Wire — 8 mm, 50 cm (19-3/4") , Chrome
High-voltage, high-temperature ignition cable with crystal-clear fluoropolymer insulation, posi-lock terminals, OE direct fit, made in the USA.
€55.31
Regular price
€70.03
ARLEN NESS
3\" Foot Control Extension Kit — 76.2 mm (3\") forward,...
Moves OEM foot controls forward for improved comfort; includes all hardware for installation and uses stock footpegs.
€188.75
Regular price
€237.29
WILD 1
Billet Aluminum Top Handlebar Clamp — 25.4 mm (1\") clamping...
Precision-machined billet aluminum top clamp that accepts stock risers and many custom bars. Mounting hardware included; made in the USA.
€60.74
Regular price
€95.44
STANDARD MOTOR PRODUCTS
Ignition Sensor Assembly — Harley Davidson®, Black, Gray
Includes pickup, mounting plate and wires with connectors.
€47.02
Regular price
€59.11
DRAG SPECIALTIES
Replacement Cylinder for Evolution Motors — 3.500" bore, 1340...
Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.
€242.15
Regular price
€327.83
STANDARD MOTOR PRODUCTS
Ignition Sensor Assembly — For Harley-Davidson, Black, Gray
Complete assembly includes pickup, mounting plate and pre-wired connectors for straightforward installation.
€47.02
Regular price
€59.11
WILD 1
Billet Aluminum Top Handlebar Clamp — Silver
Billet Aluminum Top Handlebar Clamp designed for durability, compatibility with stock risers, and includes hidden mounting hardware.
€65.74
PAUGHCO
Distributor Hold Down — Chrome
Single-bolt distributor clamp compatible with most aftermarket distributors. Made in the USA.
€17.32
Regular price
€29.03
S&S CYCLE
Cylinder Kit — 3.625" bore, 4.250" stroke
Complete cylinder kit with front and rear cylinders, gaskets and fasteners. 3.625" bore cylinders require crankcase machining.
€925.65
Regular price
€1,163.67
COVINGTONS
Billet Aluminum Handlebar Clamp — 1" (25.4 mm), Black matte
CNC machined billet aluminum clamp that secures the full clamping area; fits most '99-'17 Harley-Davidson models with 3-1/2" on-center risers.
€100.48
Regular price
€126.31
S&S CYCLE
Big Bore Cylinder Kit — 3.875" bore, 4.000" stroke, 95"...
High-performance cylinder kit that installs without case machining; includes pistons, rings and gaskets. Requires a skilled technician.
€1,037.26
Regular price
€1,303.99
BADLANDS
Auto-Canceling Turn Signal Module — 2-7/8" L x 1-3/8" W x 7/8"...
Plug-in auto-canceling turn signal module with LED load equalizer and emergency flasher. Verify your bike’s connector before purchase.
€69.26
Regular price
€87.07
DRAG SPECIALTIES SEATS
Battery Pads — 127 mm x 203 mm (5" x 8")
1/8" low-density neoprene pad with removable adhesive liner; oversized, trim-to-fit 5" x 8" for anti-vibration applications.
€13.42
Regular price
€18.17