HARLEY

-€33.10
Out of Stock

ACCUTRONIX Gauge Mount Adapter — Chrome, 25.4 mm (1")

Precision-machined adapter designed to adapt FXD and XL OEM gauge mount. Made in the U.S.A. Not for 883C/1200C XL models.

€128.72 €161.82

-€3.58
Out of Stock

DRAG SPECIALTIES Die-Cast Cable Clamp — Silver

Economical alternative to billet clamps.

€10.11 €13.69

Out of Stock

ADIGE Tire Lock — 1.60" rim width, Each

Soft-covered locks that protect rims, prevent tire slip, and are chosen by leading motorcycle manufacturers. Available for front and rear; sold individually.

-€18.94
Out of Stock

DRAG SPECIALTIES Dash/Speedometer Housing — Chrome

Die-cast housing for dash and speedometer mounting. Housing only; speedometer, lights and switch not included.

€53.51 €72.45

-€54.16
Out of Stock

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for Burly Ape hangers. Includes extended brake line (when noted), extended clutch and throttle cables, plus all required wiring. Brake lines feature PTFE inner liner and stainless steel braid. Dresser kits reuse the stock Throttle-By-Wire harness.

€210.64 €264.80

-€1,212.13
Out of Stock

S&S CYCLE Top End Kit — 3-7/16" bore, 74 cu in, 8.0:1

Complete S&S top-end kit includes heads, stock-bore cylinders, pre-fit forged 8:1 pistons with rings and wrist pins, clamps, seals, hardware and gaskets. Minimal machine work required.

€3,425.64 €4,637.77

-€723.44
Out of Stock

S&S CYCLE Top End Kit — 3-1/2" bore, 80", 8.0:1

Complete top-end kit with S&S Shovelhead-style heads, stock-bore cylinders, pre-fit forged pistons, hardware and gaskets. Made in USA.

€2,813.38 €3,536.82

Handlebar Clamp — 25.4 mm (1"), fits H-D models, black or polished

-€15.21
Out of Stock

MOTOGADGET Handlebar Clamp — 25.4 mm (1"), fits H-D models, black or...

Milled aluminum top clamp for all H-D models with 25.4 mm (1") handlebars. Replaces OEM top to fit Motoscope Mini; includes hardware and five LED indicators.

€152.02 €167.23

4-1/8" Bore Cylinder — 4.125" bore, 4.625" stroke, for '99-'17 Twin Cams, Black powder-coated

-€213.62
Out of Stock

S&S CYCLE 4-1/8" Bore Cylinder — 4.125" bore, 4.625" stroke, for '99-'17...

Bored slightly under nominal and supplied un-honed with a stock bolt pattern; made for 124" Hot Set Up Kits on '99-'17 Twin Cams. Requires crankcase machining.

€830.76 €1,044.38

-€12.03
Out of Stock

EASTERN MOTORCYCLE PARTS Rocker Box Stud Kit — 8 Pack

Includes eight long studs, two short studs and one top motor mount stud. One kit required per head.

€34.00 €46.03

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Ape Hanger, standard height, natural clear-coated

-€81.10
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Standard kit includes correct-length clutch and brake lines, chrome T junction, fittings and copper crush washers. Electrical wire extensions sold separately. Designed for 2" risers and Ape Hanger handlebars. Made in the U.S.A.

€315.36 €396.46

Out of Stock

K&L SUPPLY Wheel Weights — 10 pack, 30 g (1 oz.), crimp-on, raw silver

Helps balance tires to prevent uneven wear and tear. Made in Japan.

-€5.21
Out of Stock

EASTERN MOTORCYCLE PARTS Top Motor Mount Studs — 4 pack

Durable mounting hardware delivers secure clamping, corrosion resistance, and precise fit. Made in the U.S.A.

€14.74 €19.95

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Ape Hanger, 12"–14"

-€81.10
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Plug-and-play braided cable and brake line kit including clutch and brake lines, chrome "T" junction, banjo bolts, fittings and copper crush washers. Based on 2" risers with Ape Hanger handlebars.

€315.36 €396.46

Dash Base with Wire Harness Kit — Dash kit, PRO-ONE PERF.MFG., 400909

-€77.55
Out of Stock

PRO-ONE PERF.MFG. Dash Base with Wire Harness Kit — Dash kit, PRO-ONE PERF.MFG.,...

Complete dash base and wiring kit with ignition switch, flasher, circuit breakers and dash harness; handlebar harness sold separately.

€219.15 €296.70

Standard Stainless Braided Handlebar Cable/Brake Line Kit — 15"–17" riser fit, Ape Hanger

-€81.10
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete kit includes correct-length brake and clutch lines, wire extensions, T-junction, banjo bolts, fittings and copper crush washers. Electrical wire extensions sold separately. Made in the U.S.A.

€315.36 €396.46

Wheel Weights — 10-pack, 20 g (0.7 oz), Crimp On, Raw/Silver

Out of Stock

K&L SUPPLY Wheel Weights — 10-pack, 20 g (0.7 oz), Crimp On, Raw/Silver

Helps balance tires to reduce uneven wear. Made in Japan.

-€30.32
Out of Stock

MOTOGADGET Motoscope Pro — 109 × 47 × 11 mm, Black

Ultra-slim digital motorcycle dashboard, 109 × 47 × 11 mm, 734‑LED auto-brightness display; speedo, tach, odo and gear display; expandable via m‑Bus Breakout Boxes.

€305.68 €336.00

Replacement Cylinders for XL Evolution-Style Motors — 1200 cc, 3.5" , Black

-€85.70
Out of Stock

DRAG SPECIALTIES Replacement Cylinders for XL Evolution-Style Motors — 1200 cc,...

Ductile cast-iron sleeved cylinders pressed into aluminum castings. Sleeve ribs lock to the casting; finished slightly undersized for final honing. Ideal for stock replacement.

€242.22 €327.92

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Ape Hanger, 18"–20" riser fit, Stainless steel

-€81.10
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete braided handlebar cable and brake line kit with correct-length hoses, T junction, banjo bolts and fittings; electrical extensions sold separately.

€315.36 €396.46

Wheel Weights — Crimp On, 30 g (1 oz), 10-pack, Silver

Out of Stock

K&L SUPPLY Wheel Weights — Crimp On, 30 g (1 oz), 10-pack, Silver

Helps balance tires to prevent uneven wear and tear. Made in Japan.

Standard Stainless Braided Handlebar Cable/Brake Line Kit — 2" risers, Ape Hanger, stainless steel, clear-coated natural

-€128.89
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit — 2"...

Complete handlebar-swap kit with correct-length brake and clutch lines, T-junction, banjo bolts, fittings and copper crush washers. Electrical extensions sold separately.

€501.24 €630.13

Replacement Cylinder & Piston for S&S 106" Stroker Kit — 106", 3.875" bore, 4.5" stroke, Powder-Coated Wrinkle Black

-€325.00
Out of Stock

S&S CYCLE Replacement Cylinder & Piston for S&S 106" Stroker Kit — 106",...

Replacement cylinder and piston kit for S&S 106" stroker engines. Includes cylinders, forged pistons, rings, wrist pins, and head and base gaskets. Only for 88" motors. Requires a skilled technician.

€1,266.39 €1,591.39

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Fits 12"–14" handlebar height, Ape Hanger

-€128.89
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete stainless braided cable and brake line kit includes clutch line, brake lines, T junction, fittings and copper crush washers. Made in the U.S.A.

€501.24 €630.13

Standard Stainless Braided Handlebar Cable/Brake Line Kit — 15"–17" handlebar height, Ape Hanger, Non-ABS

-€128.89
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete kit with correct-length clutch and brake lines, chrome T junction, banjo bolts, fittings and copper crush washers. Includes wire extensions; electrical wire extensions sold separately. Made in the U.S.A.

€501.24 €630.13

-€2.67
Out of Stock

MOTOGADGET Mounting Bracket — Anodized aluminum

Milled billet bracket to mount the Motoscope Mini to the rockerbox; includes mounting hardware and instructions. Not recommended for high-heat engines.

€26.74 €29.41

Big Bore Cylinder Kit — 95 cu in, 3.875 in bore, 4.0 in stroke, Silver

-€296.17
Out of Stock

S&S CYCLE Big Bore Cylinder Kit — 95 cu in, 3.875 in bore, 4.0 in...

High-quality Big Bore cylinder kit that installs without splitting cases. Includes cylinders, pistons, rings and gaskets; made in the USA.

€1,151.75 €1,447.92

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Fits 18"–20" (45.5–51 cm), Ape Hanger

-€128.89
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete kit with correct-length brake and clutch lines, chrome T junction, fittings and crush washers; electrical extensions sold separately.

€501.24 €630.13

Standard Stainless Braided Handlebar Cable/Brake Line Kit — 38–43 cm (15"–17"), Ape Hanger, Silver clear-coated

-€129.96
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Simplifies handlebar swaps: includes correctly sized control lines, wire extensions, chrome T-junction, banjo bolts, fittings and copper crush washers. Electrical wire extensions sold separately.

€505.41 €635.37

-€103.98
Out of Stock

PAUL YAFFE BAGGER NATION Dash Kit for 6 Gallon Tank — Chrome

One-piece bolt-on dash kit for 6 gallon tanks. Includes pop-up gas cap, rubber trim and mounting hardware.

€294.24 €398.22

shop by category

HARLEY

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

HARLEY

Subcategories

HARLEY