HARLEY

High Performance Battery — 12 V, 7 Ah, 133×134×76.2 mm, negative terminal right front

DRAG SPECIALTIES BATTERIES High Performance Battery — 12 V, 7 Ah

Specifically designed for high-performance engines; radial grid for maximum cranking amps; brass spacers and stainless hardware; high vibration resistance; acid not included; not spill-proof; charge monthly when stored.

€54.25

KURYAKYN Extended Brake Pedal

Moves the brake pedal forward and down to flatten the pad angle for a more natural foot position; bronze bushing; for floorboard-equipped bikes; sold each.

€95.00

CHRIS PRODUCTS Rear Turn Signal Hardware

Direct OEM replacement mounting hardware in two finishes for motorcycle lighting assemblies.

AGM Maintenance-Free Battery — 12V 12Ah, 200 A CCA, 152.4×87.3×145 mm

YUASA AGM Maintenance-Free Battery — 12 V, 12 Ah

Maintenance-free AGM battery with sealed design for reliable starting and vibration resistance.

€112.03

CHRIS PRODUCTS Rear Turn Signal Brackets — Mount

Rear Turn Signal Brackets available in chrome or black nickel finish, designed as direct OEM replacements.

€8.30

Shift Rod Extension — 51 mm (2") longer, 7.9 mm stud, chrome

CYCLE VISIONS Shift Rod Extension — Silver, 51 mm (2") Longer

Extends any OEM or custom shift rod with 5/16"-24 threads. Made in the U.S.A.

€21.68

CYCLE PERFORMANCE PROD. Mini Flex-Blanket™

Radiant, conductive heat shield that reflects 95% of infrared heat and delivers a durable high-temperature barrier.

€57.72

CHRIS PRODUCTS Turn Signal Standoff

Redesigned to accommodate new wiring configurations; provides secure mounting and easy installation.

€10.22

Extended Rim Lock Nuts — 8 mm x 1.25 mm, 13 mm hex head, Black gloss, Set

MOTION PRO Extended Rim Lock Nuts

Gloss finish with laser-engraved logo. 6061-T6 aluminum construction. Extra length for easy removal and installation. Fits 8 mm x 1.25 mm rim lock bolts. 13 mm hex head. Includes two nuts and two beveled washers.

Shifter Shaft Cap — Polished chrome, aluminum

DRAG SPECIALTIES Shifter Shaft Cap — Silver

Die-cast aluminum cap with polished chrome finish. Fits FL and FXD/FLHR/FLHX/FLTRX/FLTRU and FL Trike mid-control models with forward controls. Mounts with a setscrew to protect your boot.

€6.71

Replacement Windshield — 130 Series, 10", Smoke

SLIPSTREAMER Replacement Windshield — Gray

Direct replacement windshield for H-D Touring models. Made in the USA.

€70.10

Handguard LED Light Kit — 12V, 8W, Star Series

POWERMADD Handguard LED Light Kit — 12 V

Snap-in lighting modules that boost peripheral visibility and can be wired via the included waterproof switch. 200 lumens per module.

€42.97

Rim Lock Damper — 1.6", 1.4" rim width, Black, Raw

MOTION PRO Rim Lock Damper

Reduces rim lock shifting and spoke stress; installs under common rear rim locks for improved wheel reliability.

Diamond-Style Light Kits — 146 mm (5-3/4"), 12 V, 55 W, Halogen

DRAG SPECIALTIES Diamond-Style Light Kits — 12 V

Diamond-style reflector light kit replaces older-style lights and includes a bulb and wiring for straightforward installation; fits most housings.

€30.69

LiteLoc™ II Rim Lock — Rim width 1.6 in, with nut/beveled washer

MOTION PRO LiteLoc™ II Rim Lock

Thermoplastic cover and nylon composite body lock the tire securely; recommended nut torque 10 lb/ft. Super light and impact resistant.

$Battery Cable — 4 AWG, 127 mm (5\"), Ring terminal, Black$

TERRY COMPONENTS Battery Cable

Flexible silicone jacket for easy routing and long life. 99.9% electrolytic copper lug for a secure, conductive connection. Delivers strong cranking power with minimal voltage drop. Made in the USA.

€17.94

Red and Clear Skull Taillight — 63.5 mm H, 12.5 cm L, 63.5 mm W, Red/Clear lens, Chrome housing

DRAG SPECIALTIES Red and Clear Skull Taillight

Skull-style taillight with die-cast frame for durable custom styling.

€34.00

LiteLoc™ II Rim Lock — Rim width 1.85", with nut and beveled washer

MOTION PRO LiteLoc™ II Rim Lock

Lightweight rim lock with a TPU cover for added shock absorption, precision-molded nylon body, and angled ribs to secure the tire bead. Recommended nut torque: 10 lb/ft.

Replacement Taillight Lens — Clear/Red, Rear, P/N 12-0401

DRAG SPECIALTIES Replacement Taillight Lens

Top-quality replacement component for motorcycle lighting. Durable construction for reliable performance and simple installation.

€16.32

LiteLoc™ II Rim Lock — 2.15" rim width, with nut and beveled washer

MOTION PRO LiteLoc™ II Rim Lock

Thermoplastic polyurethane cover for improved shock absorption and pinch‑flat protection; precision molded nylon composite body; unique angled ribs for a secure fit; recommended nut torque 10 lb/ft.