HARLEY

Out of Stock

NAMZ Ground Loop Isolator — Black

Inline audio isolator reduces hum from ground loops; features RCA jacks and U.S. manufacture.

€13.38

Out of Stock

ACCUTRONIX Gauge Mount Adapter — Chrome, 25.4 mm (1")

Precision-machined adapter designed to adapt FXD and XL OEM gauge mount. Made in the U.S.A. Not for 883C/1200C XL models.

€124.60

Out of Stock

MOTOGADGET [object Object]

Plug-and-play adapter that connects Motogadget instruments to the vehicle OBD port, reading speed, engine RPM and MIL directly from the H-D data bus. Compact, vibration- and weather-resistant.

€73.26

Out of Stock

ADIGE Tire Lock — 1.60" rim width, Each

Soft-covered locks that protect rims, prevent tire slip, and are chosen by leading motorcycle manufacturers. Available for front and rear; sold individually.

Out of Stock

HOGTUNES Audio Cable — Stereo, Black

1-meter stereo audio cable with 90° ends; gold-plated connectors; connects MP3/satellite/GPS to the aux in.

€7.38

Out of Stock

DRAG SPECIALTIES Dash/Speedometer Housing — Chrome

Die-cast housing for dash and speedometer mounting. Housing only; speedometer, lights and switch not included.

€51.80

Out of Stock

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 51 cm (20 in), Chrome, Silver

Braided spark plug wire engineered for high-voltage performance. FEP outer insulation prevents interference, Posi-lock terminals provide secure connections, OE direct fitment, made in the USA.

€59.49

Out of Stock

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 51.5 cm, Chrome

Direct-fit braided spark plug wires with heavy-walled FEP insulation and Posi-lock terminals for clean, interference-free spark delivery.

€59.49

Passive Flexpower™ Hide-Away AM/FM/WB Antenna

Out of Stock

J & M Passive Flexpower™ Hide-Away AM/FM/WB Antenna

The Passive Flexpower™ Hide-Away AM/FM/WB Antenna is designed for seamless integration with factory radios, eliminating the need for rear-mounted antennas.

€31.92

Handlebar Clamp — 25.4 mm (1"), fits H-D models, black or polished

Out of Stock

MOTOGADGET Handlebar Clamp — 25.4 mm (1"), fits H-D models, black or...

Milled aluminum top clamp for all H-D models with 25.4 mm (1") handlebars. Replaces OEM top to fit Motoscope Mini; includes hardware and five LED indicators.

€147.16

Ignition Sensor Assembly — Harley Davidson®, Black/Gray

Out of Stock

STANDARD MOTOR PRODUCTS Ignition Sensor Assembly — Harley Davidson®, Black/Gray

Includes pickup, mounting plate and wires with connectors for straightforward installation.

€45.52

Out of Stock

K&L SUPPLY Wheel Weights — 10 pack, 30 g (1 oz.), crimp-on, raw silver

Helps balance tires to prevent uneven wear and tear. Made in Japan.

Out of Stock

CIRO Antenna — Chrome, for Harley-Davidson

Bullet-style sleek replacement for whip antennas
OEM-equivalent AM/FM/WB reception
Easy bolt-on to OEM mount; flexible rubber base

€36.23

Dash Base with Wire Harness Kit — Dash kit, PRO-ONE PERF.MFG., 400909

Out of Stock

PRO-ONE PERF.MFG. Dash Base with Wire Harness Kit — Dash kit, PRO-ONE PERF.MFG.,...

Complete dash base and wiring kit with ignition switch, flasher, circuit breakers and dash harness; handlebar harness sold separately.

€212.13

Wheel Weights — 10-pack, 20 g (0.7 oz), Crimp On, Raw/Silver

Out of Stock

K&L SUPPLY Wheel Weights — 10-pack, 20 g (0.7 oz), Crimp On, Raw/Silver

Helps balance tires to reduce uneven wear. Made in Japan.

Out of Stock

MOTOGADGET Motoscope Pro — 109 × 47 × 11 mm, Black

Ultra-slim digital motorcycle dashboard, 109 × 47 × 11 mm, 734‑LED auto-brightness display; speedo, tach, odo and gear display; expandable via m‑Bus Breakout Boxes.

€295.90

Wheel Weights — Crimp On, 30 g (1 oz), 10-pack, Silver

Out of Stock

K&L SUPPLY Wheel Weights — Crimp On, 30 g (1 oz), 10-pack, Silver

Helps balance tires to prevent uneven wear and tear. Made in Japan.

Out of Stock

DRAG SPECIALTIES Ignition Sensor Assembly — Black, Gray

Replacement ignition sensor assembly. Includes pickup, mounting plate and pre-wired connectors.

€52.71

Out of Stock

CIRO Antenna — Chrome, fits Harley-Davidson®

Bullet-style radio antenna — sleek, sturdy upgrade over long whip antennas; mounts to OEM factory mount, flexible rubber base reduces breakage; AM, FM and WB reception.

€36.23

Out of Stock

DRAG SPECIALTIES Ignition Sensor Assembly — Black, Gray

Each assembly includes a pickup, mounting plate and wires with connectors for easy installation.

€54.03

Antenna — Fits Harley‑Davidson®, Black anodized

Out of Stock

CIRO Antenna — Fits Harley‑Davidson®, Black anodized

Bullet-style replacement preserves AM/FM/WB reception, screws onto the OEM mount, and resists breakage.

€37.17

Out of Stock

DRAG SPECIALTIES Ignition Sensor Assembly — Black, Gray

Includes pickup, mounting plate and wires with connectors for straightforward installation.

€52.71

Out of Stock

NAMZ Antenna — Harley Davidson®, Black

Replacement antenna for models with a radio antenna. Plug-n-play installation.

€14.84

Out of Stock

MOTOGADGET Mounting Bracket — Anodized aluminum

Milled billet bracket to mount the Motoscope Mini to the rockerbox; includes mounting hardware and instructions. Not recommended for high-heat engines.

€25.88

Out of Stock

PAUL YAFFE BAGGER NATION Dash Kit for 6 Gallon Tank — Chrome

One-piece bolt-on dash kit for 6 gallon tanks. Includes pop-up gas cap, rubber trim and mounting hardware.

€284.82

Out of Stock

PAUL YAFFE BAGGER NATION Dash Kit for 6 Gallon Tank — 6 gal, black gloss

One-piece bolt-on dash; no welding. Includes chrome pop-up gas cap, rubber trim and hardware.

€195.54

Out of Stock

DRAG SPECIALTIES Circuit Breaker — 40 A, threaded connector

Replacement circuit breaker offering reliable protection and easy installation for maintenance or repairs.

€5.98

Out of Stock

DRAG SPECIALTIES Tee-Bar Gauge Mounts — 32 mm (1-1/4"), Black gloss

Two-piece clamp-on gauge mounts for Tee-Bar setups. Billet aluminum construction. Sold without cups; may require an OEM gasket. Not for use with XL880C/1200C OEM gauge.

€145.94

Out of Stock

DRAG SPECIALTIES Micro Relay with Diode — 12V, Black

Direct OEM replacement. Compact micro relay with integrated diode for reliable switching.

€9.53

Tee-Bar Gauge Mounts — 32 mm (1-1/4") T-Bars, 3-1/2" on-center pullback, Black

Out of Stock

DRAG SPECIALTIES Tee-Bar Gauge Mounts — 32 mm (1-1/4") T-Bars, 3-1/2" on-center...

Two-piece clamp-on gauge mount for Tee-style handlebars. Made in the USA. Not compatible with XL880C/1200C OEM gauge. Sold without cups; may require OEM gasket.

€147.30

shop by category

HARLEY

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

HARLEY

Subcategories

HARLEY