HARLEY

-€4.60
Out of Stock

NAMZ Ground Loop Isolator — Black

Inline audio isolator reduces hum from ground loops; features RCA jacks and U.S. manufacture.

€13.82 €18.42

-€3.58
Out of Stock

DRAG SPECIALTIES Die-Cast Cable Clamp — Silver

Economical alternative to billet clamps.

€10.11 €13.69

Out of Stock

ADIGE Tire Lock — 1.60" rim width, Each

Soft-covered locks that protect rims, prevent tire slip, and are chosen by leading motorcycle manufacturers. Available for front and rear; sold individually.

-€2.70
Out of Stock

HOGTUNES Audio Cable — Stereo, Black

1-meter stereo audio cable with 90° ends; gold-plated connectors; connects MP3/satellite/GPS to the aux in.

€7.63 €10.33

-€26.97
Out of Stock

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" clamping diameter, Black gloss

Billet aluminum clamp that strengthens risers, supports sized-down and 1" handlebars, and fits 3-1/2" on-center risers.

€76.23 €103.20

-€33.30
Out of Stock

LA CHOPPERS Handlebar Clamp Set — 1" clamping diameter, raw finish

CNC-machined 6061-T6 aluminum handlebar clamp set with all installation hardware included; fits under the stock cover for a clean installation.

€129.51 €162.81

-€54.16
Out of Stock

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for Burly Ape hangers. Includes extended brake line (when noted), extended clutch and throttle cables, plus all required wiring. Brake lines feature PTFE inner liner and stainless steel braid. Dresser kits reuse the stock Throttle-By-Wire harness.

€210.64 €264.80

-€33.30
Out of Stock

LA CHOPPERS Handlebar Clamp Set — 1-1/4" clamp, tapped 1/2"-13, raw finish

Fits under the stock cover; includes installation hardware and set screws; CNC-machined alloy construction; tapped for 1/2"-13 riser bolts; top clamp locks handlebars.

€129.51 €162.81

-€12.52
Out of Stock

KURYAKYN Billet Antenna — 12" L, Chrome

Precision-machined construction with an over-molded spring base; 12" L direct OEM replacement. AM/FM reception only.

€48.69 €61.21

Buffalo Handlebar Clamp — 1" clamping diameter, fits 3-1/2" on-center risers, black flat finish

-€19.69
Out of Stock

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" clamping diameter, fits 3-1/2"...

Billet aluminum clamp that covers the full clamping area of 1-1/4" handlebars sized down to 1"; fits 1" handlebars and mounts to 3-1/2" on-center risers.

€55.61 €75.30

Passive Flexpower™ Hide-Away AM/FM/WB Antenna

Out of Stock

J & M Passive Flexpower™ Hide-Away AM/FM/WB Antenna

The Passive Flexpower™ Hide-Away AM/FM/WB Antenna is designed for seamless integration with factory radios, eliminating the need for rear-mounted antennas.

€31.92

-€6.24
Out of Stock

DRAG SPECIALTIES Handlebar Clamp — 1", Chrome

Die-cast clamp fits most '74-'17 models with 3-1/2" on-center risers; fits 1" OD bars. Sold each.

€17.65 €23.89

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Ape Hanger, standard height, natural clear-coated

-€81.10
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Standard kit includes correct-length clutch and brake lines, chrome T junction, fittings and copper crush washers. Electrical wire extensions sold separately. Designed for 2" risers and Ape Hanger handlebars. Made in the U.S.A.

€315.36 €396.46

Out of Stock

K&L SUPPLY Wheel Weights — 10 pack, 30 g (1 oz.), crimp-on, raw silver

Helps balance tires to prevent uneven wear and tear. Made in Japan.

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Ape Hanger, 12"–14"

-€81.10
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Plug-and-play braided cable and brake line kit including clutch and brake lines, chrome "T" junction, banjo bolts, fittings and copper crush washers. Based on 2" risers with Ape Hanger handlebars.

€315.36 €396.46

-€9.63
Out of Stock

CIRO Antenna — Chrome, for Harley-Davidson

Bullet-style sleek replacement for whip antennas
OEM-equivalent AM/FM/WB reception
Easy bolt-on to OEM mount; flexible rubber base

€37.43 €47.06

Standard Stainless Braided Handlebar Cable/Brake Line Kit — 15"–17" riser fit, Ape Hanger

-€81.10
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete kit includes correct-length brake and clutch lines, wire extensions, T-junction, banjo bolts, fittings and copper crush washers. Electrical wire extensions sold separately. Made in the U.S.A.

€315.36 €396.46

Wheel Weights — 10-pack, 20 g (0.7 oz), Crimp On, Raw/Silver

Out of Stock

K&L SUPPLY Wheel Weights — 10-pack, 20 g (0.7 oz), Crimp On, Raw/Silver

Helps balance tires to reduce uneven wear. Made in Japan.

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Ape Hanger, 18"–20" riser fit, Stainless steel

-€81.10
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete braided handlebar cable and brake line kit with correct-length hoses, T junction, banjo bolts and fittings; electrical extensions sold separately.

€315.36 €396.46

Wheel Weights — Crimp On, 30 g (1 oz), 10-pack, Silver

Out of Stock

K&L SUPPLY Wheel Weights — Crimp On, 30 g (1 oz), 10-pack, Silver

Helps balance tires to prevent uneven wear and tear. Made in Japan.

Standard Stainless Braided Handlebar Cable/Brake Line Kit — 2" risers, Ape Hanger, stainless steel, clear-coated natural

-€128.89
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit — 2"...

Complete handlebar-swap kit with correct-length brake and clutch lines, T-junction, banjo bolts, fittings and copper crush washers. Electrical extensions sold separately.

€501.24 €630.13

T-Bar Handlebar Clamp Mount Kit — Chrome, 3-1/2" bolt centers, 4-3/4" hole centers

-€19.71
Out of Stock

PAUGHCO T-Bar Handlebar Clamp Mount Kit — Chrome, 3-1/2" bolt centers,...

Mounting kit for T-bar clamp; fits most handlebars or risers with 3-1/2" bolt centers and most Springer top trees with 4-3/4" hole centers. Made in the USA.

€76.68 €96.39

-€9.63
Out of Stock

CIRO Antenna — Chrome, fits Harley-Davidson®

Bullet-style radio antenna — sleek, sturdy upgrade over long whip antennas; mounts to OEM factory mount, flexible rubber base reduces breakage; AM, FM and WB reception.

€37.43 €47.06

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Fits 12"–14" handlebar height, Ape Hanger

-€128.89
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete stainless braided cable and brake line kit includes clutch line, brake lines, T junction, fittings and copper crush washers. Made in the U.S.A.

€501.24 €630.13

Antenna — Fits Harley‑Davidson®, Black anodized

-€9.87
Out of Stock

CIRO Antenna — Fits Harley‑Davidson®, Black anodized

Bullet-style replacement preserves AM/FM/WB reception, screws onto the OEM mount, and resists breakage.

€38.40 €48.27

Standard Stainless Braided Handlebar Cable/Brake Line Kit — 15"–17" handlebar height, Ape Hanger, Non-ABS

-€128.89
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete kit with correct-length clutch and brake lines, chrome T junction, banjo bolts, fittings and copper crush washers. Includes wire extensions; electrical wire extensions sold separately. Made in the U.S.A.

€501.24 €630.13

$1-1/2\" Big Buffalo Riser Top Clamp — 1-1/2\" (38 mm), Chrome$

-€27.34
Out of Stock

DRAG SPECIALTIES 1-1/2\" Big Buffalo Riser Top Clamp — 1-1/2\" (38 mm), Chrome

One-piece billet top clamp with show-chrome finish for Drag Specialties 1-1/2\" Big Buffalo bars. Chrome end caps included; solid clamp sold separately.

€77.26 €104.60

-€5.11
Out of Stock

NAMZ Antenna — Harley Davidson®, Black

Replacement antenna for models with a radio antenna. Plug-n-play installation.

€15.33 €20.44

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Fits 18"–20" (45.5–51 cm), Ape Hanger

-€128.89
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete kit with correct-length brake and clutch lines, chrome T junction, fittings and crush washers; electrical extensions sold separately.

€501.24 €630.13

Top Handlebar Clamp for 1-1/4" Handlebars — 1-1/4" (32 mm), polished chrome

-€19.51
Out of Stock

LA CHOPPERS Top Handlebar Clamp for 1-1/4" Handlebars — 1-1/4" (32 mm),...

Top clamp for 1-1/4" handlebars with polished chrome finish. Fits L.A. Choppers and similar bars. Sold as a pair.

€75.89 €95.40

shop by category

HARLEY

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

HARLEY

Subcategories

HARLEY