HARLEY (82)

MAGNUM SHIELDING Braided Universal Brake Line — 32 in (81.5 cm), Chrome

Inner PTFE tubing with 100% aramid braid reduces expansion for superior brake control. Crystal-clear outer jacket resists scuffs and discoloration. Banjo bolts, fittings and crush washers sold separately.

€46.88

Braided Universal Brake Line — 42" (106.5 cm), Chrome, Sterling Chromite® II

MAGNUM SHIELDING Braided Universal Brake Line — 42" (106.5 cm), Chrome,...

Braided brake line with inner PTFE tubing and 100% aramid coverage for reduced expansion, clear protective jacket, and long-lasting performance. Banjo bolts and fittings sold separately.

€51.94

MIKUNI Choke Cable — 990-662-002, Black

Direct replacement for HSR 42/45 carb kits; compatible with plastic nut, spring and brass plunger interfaces.

€25.10

PRO-ONE PERF.MFG. Chrome Billet Choke Cable Knob Cover — Choke Knob

Fits all plastic choke knobs. Screws together for a positive fit.

€18.86

KURYAKYN Marquis Choke Cable Knob Cover — Chrome

Installs over the stock plastic choke knob to improve appearance and usability.

€30.09

DRAG SPECIALTIES Chrome Cable/Wire Covering — 4.8 mm, 152.5 cm, Chrome

Flexible chrome coiled plastic covering for control cables and electrical wires. Protects and organizes wiring and resists surface wear.

€4.00

$Chrome Cable/Wire Covering — 7.9 mm (5/16\"), 152.5 cm (5')$

DRAG SPECIALTIES Chrome Cable/Wire Covering — 7.9 mm (5/16\"), 152.5 cm (5')

Flexible coiled covering that protects control cables and electrical wires from abrasion and snagging; slides over cable runs for a clean finish.

€5.06

DRAG SPECIALTIES Die-Cast Cable Clamp — 25.4 mm (1"), Chrome

Economical alternative to billet clamps; compact die-cast design for reliable cable retention.

€6.69

DRAG SPECIALTIES Die-Cast Cable Clamp — 25.4 mm (1"), Chrome

Economical die-cast clamp; replacement for billet clamps.

€5.50

MOTION PRO Throttle/Idle Cable Retaining Clips — Throttle, 10-pack, Natural

Replacement retaining clips for throttle and idle cables. Secure hold and easy installation.

€3.09

MOTION PRO Throttle/Idle Cable Ferrules — 10-Pack, Natural finish

Replacement ferrules for control cables; protect cable ends and simplify installation.

€10.46

DRAG SPECIALTIES Clutch Cable Support Bracket — Chrome, Single-cable

Mounts in the stock location to provide clean cable routing and reliable, trouble-free action.

€5.38

MAGNUM SHIELDING Braided Universal Brake Line — 198 cm (78") , Chrome

PTFE inner tubing with 100% aramid coverage reduces expansion for improved brake control. Crystal-clear jacket resists scuffs and discoloration. Banjo bolts and fittings sold separately.

€70.57

DRAG SPECIALTIES Caliper Seal Kit — Rear, Black

High-quality replacement components that restore caliper sealing and improve brake performance.

€4.82

DRAG SPECIALTIES Caliper Rebuild Kit — Front, Rear, Black

Complete kit to rebuild brake caliper seals and dust boots. Includes high-quality replacement components for reliable sealing and easy installation.

€4.75

Replacement Cable for Throttle Assemblies — 122 cm (48"), Black, Idle/Throttle

S&S CYCLE Replacement Cable for Throttle Assemblies — 122 cm (48"),...

Replacement cable for use with S&S Universal Throttle Assembly Kit. Made in the U.S.A.

€57.38

DRAG SPECIALTIES Caliper Rebuild Kit — Front, Black

High-quality replacement components with included seal and dust boot for a complete caliper rebuild.

€5.69

Replacement Throttle/Idle Cable for Dual-Cable Throttle Assembly Kits — 99 cm (39"), fits S&S Super E & G ('81–'95)

S&S CYCLE Replacement Throttle/Idle Cable for Dual-Cable Throttle...

Replacement throttle/idle cable for S&S dual-cable throttle assembly kits. Fits early-style S&S Super E & G carbs and butterfly-type carburetors with '81–'95 OEM-style linkage. Made in the U.S.A.

€43.41

S&S CYCLE Black Vinyl Throttle/Idle Cable — 42" housing, 90° elbow

Fits early-style S&S carburetors with short cable guides when using stock throttle assemblies. Made in the U.S.A. Length refers to outer housing only, excluding the elbow.

€62.01

DRAG SPECIALTIES Caliper Rebuild Kit — Front/Rear, Black, 20269-HC3

High-quality replacement components; includes seal and dust boot for a complete caliper rebuild.

€3.78

S&S CYCLE Black Vinyl Throttle/Idle Cable — 42" housing, 90° elbow

Fits early-style S&S carburetors with short cable guides. Made in the U.S.A. Length given is for the outer housing only.

€63.56

DRAG SPECIALTIES Caliper Rebuild Kit — Front/Rear, Black

High-quality replacement components to rebuild brake calipers and restore braking performance.

€37.56

Black Vinyl Throttle/Idle Cable — 132 cm (52") housing, 122 cm (48") overall, 90° elbow

S&S CYCLE Black Vinyl Throttle/Idle Cable — 132 cm (52") housing, 122 cm...

Fits early-style S&S carburetors with short cable guides; made in the U.S.A.; length refers to the outer housing only (excludes the elbow).

€62.01

$Black Vinyl Throttle/Idle Cable — 132 cm (52\"), 90° elbow$

S&S CYCLE Black Vinyl Throttle/Idle Cable — 132 cm (52\"), 90° elbow

Fits early-style S&S carburetors with short cable guides; made in the U.S.A.; listed length refers to outer housing only.

€81.18

DRAG SPECIALTIES OEM-Style Rear Master Cylinder Assembly Cover — Chrome, Rear

Replacement cover restores appearance and protects the brake assembly; easy bolt-on installation.

€19.84

ACCUTRONIX Throttle/Idle Cable Clamp — Chrome, Dual cable

Two-piece clamp that separates cables to prevent rubbing and keeps them routed; easy to install. Made in the U.S.A.

€31.43

BARNETT Black Vinyl Throttle/Idle Cable — 81.5 cm (32")

Throttle and idle cable with nylon-lined, PVC-coated casing; made in the U.S.A.

€29.07

BARNETT Black Vinyl Throttle/Idle Cable — 32"

Available with nylon-lined, PVC-coated casings. Made in the U.S.A. Length refers to outer housing only; elbows and adjusters excluded.

€29.07

$Rear Brake Master Cylinder — 19.1 mm (3/4\"), chrome$

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4\"), chrome

Complete rear master cylinder assembly. Fully assembled for easy installation.

€81.77

$Black Vinyl Throttle/Idle Cable — 81.5 cm (32\") housing$

BARNETT Black Vinyl Throttle/Idle Cable — 81.5 cm (32\") housing

Available with nylon-lined, PVC-coated casings. Made in the U.S.A. Length measurement refers to outer housing only.

€29.07

shop by category

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

Subcategories

HARLEY