HARLEY (7)

Designer Series Braided Non-ABS Front Brake Line Kit — 23 in (58.5 cm), 10 mm 180° banjo, chrome

-€14.45
Out of Stock

MAGNUM SHIELDING Designer Series Braided Non-ABS Front Brake Line Kit — 23 in...

Two-piece braided front brake line kit with brazed manifold, PTFE inner tubing and AN-3 fittings. Fits non-ABS applications; upper line accommodates alternative routing.

€54.32 €68.77

Standard Stainless Braided Handlebar Cable/Brake Line Kit — Ape Hanger, 12"-14", stainless steel

-€88.08
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Standard kit with correct-length brake and clutch lines and wire extensions; electrical extensions sold separately.

€342.51 €430.59

-€25.47
Out of Stock

RIVCO PRODUCTS Flatfoot Pegs — 3/8" peg mount hole, bolt-on, Black

Wide flat surface for comfort; folds when not in use; setscrew-adjustable angle. Sold in pairs. Made in the U.S.A.

€99.03 €124.50

Standard Stainless Braided Handlebar Cable/Brake Line Kit — 18"–20" (45.5–51 cm), Ape Hanger

-€88.08
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Standard kit with correct-length brake and clutch lines, chrome T junction, banjo bolts, fittings and wire extensions for controls (electrical extensions sold separately). Made in the U.S.A.

€342.51 €430.59

-€25.47
Out of Stock

RIVCO PRODUCTS Flatfoot Pegs — Black, Gloss, Bolt-On

Wide flat surface for support and comfort; folds when not in use; sold in pairs.

€99.03 €124.50

Alternate Length Designer Series Braided Non-ABS Front Upper Brake Line Kit — 25", 10 mm banjo fitting

-€16.10
Out of Stock

MAGNUM SHIELDING Alternate Length Designer Series Braided Non-ABS Front Upper...

Two-piece direct-fit design for accurate installation on non-ABS bikes. Crystal clear jacket resists scuffing and discoloration. AN-3 connections for easy fitment. One upper and one lower kit required per side; two kits per bike.

€60.48 €76.58

Standard Black Vinyl Handlebar Cable/Brake Line Kit — 45.5–51 cm (18–20 in), Ape Hanger

-€84.31
Out of Stock

LA CHOPPERS Standard Black Vinyl Handlebar Cable/Brake Line Kit — 45.5–51...

Complete handlebar cable and brake line kit with pre-measured lines, chrome T junction, fittings and crush washers. Made in the U.S.A.

€327.90 €412.21

-€108.95
Out of Stock

LINDBY Linbar® Highway Bar — 32 mm (1-1/4") front, bolt-on, black gloss

Durable front and rear highway bars with neoprene o-rings; rear bars compatible with most stock exhaust; not recommended for use with extended forward controls or floorboards.

€369.98 €478.93

Alternate Length Designer Series Braided Non-ABS Front Upper Brake Line Kit — 27"

-€16.55
Out of Stock

MAGNUM SHIELDING Alternate Length Designer Series Braided Non-ABS Front Upper...

Alternate-length braided front upper brake line kit for non-ABS models. Two-piece design with brazed manifold, crystal-clear outer jacket and AN-3 fittings. One upper and one lower kit required; two kits per bike. Made in the U.S.A.

€62.20 €78.75

-€57.12
Out of Stock

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for Burly Ape hangers.
Includes extended brake line (when supplied), extended clutch cable/line, and extended throttle/idle cables as required.
Brake lines (when included) have PTFE inner liner and stainless steel outer braid.
Dresser kits reuse the stock Throttle-By-Wire harness.
Based on installation with 2" risers for ape hanger–style handlebars.

€222.16 €279.28

-€111.67
Out of Stock

LINDBY Linbar® Highway Bar — 32 mm (1-1/4"), Bolt-On, Black

Durable, precision-bent highway bars with neoprene o-rings. Rear bars fit most stock exhausts; removal of rear footpegs or floorboards required.

€379.23 €490.90

-€57.12
Out of Stock

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for Burly Ape hangers with extended brake, clutch and throttle lines and all necessary wiring for a clean install.

€222.16 €279.28

Caliper Kit — 292 mm rotor, Chrome, front mount

-€91.52
Out of Stock

PERFORMANCE MACHINE (PM) Caliper Kit — 292 mm rotor, Chrome, front mount

Precision machined construction with a four-piston dual-action design for reliable stopping. Kit includes mounting hardware, brake pads and bleeder screw.

€527.94 €619.46

-€45.18
Out of Stock

RIVCO PRODUCTS Highway Peg Mounts for Softail — 15 cm (6"), 32–38 mm clamp

Clamp-on highway peg mounts for Softail with an adjustable arm and secure no-slip clamp; compatible with most peg sets (sold separately).

€175.72 €220.90

-€57.12
Out of Stock

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for Burly Ape hangers. Includes extended brake line (unless noted), extended clutch and throttle cables as required, and all necessary wiring. Brake lines feature PTFE inner liner and stainless steel outer braid. Dresser kits reuse the stock Throttle-By-Wire harness. Based on using 2" risers.

€222.16 €279.28

-€57.12
Out of Stock

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for Burly Ape hangers with extended brake, clutch and throttle lines plus wiring; PTFE-lined braided brake lines when included.

€222.16 €279.28

$Six-Piston Differential-Bore Front Caliper — 6-piston, 292 mm (11-1/2\"), Chrome, Right$

-€84.91
Out of Stock

PERFORMANCE MACHINE (PM) Six-Piston Differential-Bore Front Caliper — 6-piston, 292 mm...

Six-piston differential-bore front caliper kit for select Harley-Davidson models; includes pads, bleeder screw and 3/8"-24 banjo bolt. Made in the U.S.A.

€489.91 €574.82

$Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers — 35.5 cm (14\") riser fit$

-€57.12
Out of Stock

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for Burly Ape hangers. Includes extended brake line (when applicable), extended clutch and throttle cables, complete wiring and hardware. PTFE-lined brake lines with stainless braid where included. Dresser kits reuse the stock Throttle-By-Wire harness.

€222.16 €279.28

$Six-Piston Differential-Bore Front Caliper — 6 piston, 330 mm (13\"), left, Chrome$

-€84.91
Out of Stock

PERFORMANCE MACHINE (PM) Six-Piston Differential-Bore Front Caliper — 6 piston, 330 mm...

Front differential-bore caliper for dual-disc setups. Includes brake pads, bleeder screw and 3/8"-24 banjo bolt. See fitment notes for model compatibility and master cylinder bore requirements.

€489.91 €574.82

Out of Stock

BILTWELL Footpeg Mounts — Black

Footpeg Mounts made from investment-cast 4130 chromoly steel provide strength and durability, featuring easy angle adjustment and secure fastening options.

€23.42

-€57.12
Out of Stock

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for Burly Ape hangers
Includes extended brake line (unless noted), clutch and throttle/idle cables, and necessary wiring
Brake lines (when included) feature PTFE inner liner and stainless steel outer braid
Dresser kits reuse stock Throttle-By-Wire harness
Based on using 2" risers with ape hanger-style handlebars

€222.16 €279.28

Six-Piston Differential-Bore Front Caliper — 330 mm (13"), 6-piston, right-hand, Chrome

-€84.91
Out of Stock

PERFORMANCE MACHINE (PM) Six-Piston Differential-Bore Front Caliper — 330 mm (13"),...

High-performance front caliper for dual-disc applications. Includes pads, bleeder screw and 3/8"-24 banjo bolt. Made in the U.S.A. Check master cylinder bore requirements before installation.

€489.91 €574.82

Six-Piston Differential-Bore Front Caliper — 6 Piston, 292 mm (11-1/2"), Chrome, Left

-€105.92
Out of Stock

PERFORMANCE MACHINE (PM) Six-Piston Differential-Bore Front Caliper — 6 Piston, 292 mm...

Front caliper for dual-disc applications; includes pads, bleeder screw and 3/8"-24 banjo bolt. Made in the U.S.A. Fits select Harley-Davidson models; check master cylinder requirements.

€476.65 €582.57

$Highway Pegs With Mounting Arms — 32 mm (1-1/4\"), 12.5 cm (5\"), Black$

-€31.17
Out of Stock

RIVCO PRODUCTS Highway Pegs With Mounting Arms — 32 mm (1-1/4\"), 12.5 cm...

Highway pegs with mounting arms for added riding comfort. Fits highway bars with or without lower fairings. Includes tools for easy installation. Textured foot surface for better grip.

€121.22 €152.39

Standard Black Vinyl Handlebar Cable/Brake Line Kit — 30.5 cm - 35.5 cm (12" - 14"), Ape Hanger

-€103.11
Out of Stock

LA CHOPPERS Standard Black Vinyl Handlebar Cable/Brake Line Kit — 30.5 cm...

Includes clutch and brake lines, chrome "T" junction, banjo bolts, fittings and copper crush washers. Correct lengths and mechanical wire extensions included; electrical wire extensions sold separately. Made in the U.S.A.

€400.99 €504.10

Six-Piston Differential-Bore Front Caliper — 6-piston, 292 mm rotor, right mount, chrome

-€84.91
Out of Stock

PERFORMANCE MACHINE (PM) Six-Piston Differential-Bore Front Caliper — 6-piston, 292 mm...

Front brake unit for dual-disc applications; includes pads, bleeder screw and 3/8"-24 banjo bolt. Made in the U.S.A.

€489.91 €574.82

Highway Pegs With Mounting Arms — 1-1/4" clamp, 2.5" arm, clamp-on

-€31.95
Out of Stock

RIVCO PRODUCTS Highway Pegs With Mounting Arms — 1-1/4" clamp, 2.5" arm,...

Comfort-oriented highway footpegs with textured surface and included installation tools.

€124.25 €156.20

Standard Stainless Braided Handlebar Cable/Brake Line Kit — 12" - 14" Ape Hanger, Stainless steel

-€98.29
Out of Stock

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Standard kit with braided cables and brake lines to simplify handlebar swaps. Includes brake/clutch lines, chrome T junction, fittings and crush washers; electrical extensions sold separately.

€382.19 €480.48

$Six-Piston Differential-Bore Front Caliper — 6-piston, 330 mm (13\"), left mounting, chrome$

-€84.91
Out of Stock

PERFORMANCE MACHINE (PM) Six-Piston Differential-Bore Front Caliper — 6-piston, 330 mm...

Six-piston differential-bore front caliper for dual-disc setups; includes pads, bleeder screw and 3/8"-24 banjo bolt.

€489.91 €574.82

Highway Pegs With Mounting Arms — 32 mm (1-1/4"), 12.5 cm (5"), matte black

-€31.95
Out of Stock

RIVCO PRODUCTS Highway Pegs With Mounting Arms — 32 mm (1-1/4"), 12.5 cm...

Tapered, ribbed highway footpegs that improve comfort on long rides. Includes installation tools; sold as a set.

€124.25 €156.20

shop by category

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

Subcategories

HARLEY