HARLEY (55)

Replacement Primary Drive Belt — 38.1 mm (1-1/2"), 78 teeth

-€42.91

BELT DRIVES LTD. Replacement Primary Drive Belt — 38.1 mm (1-1/2"), 78 teeth

Replacement primary drive belt for BDL primary drives. Durable construction for consistent engagement.

€166.89 €209.80

Transmission Pulley — 28 tooth, anodized

-€78.94

BELT DRIVES LTD. Transmission Pulley — 28 tooth, anodized

Lightweight, durable replacement pulley that reduces rotating mass and includes spacer for '85–'93 Big Twin models; belt length or axle adjustments may be required.

€151.09 €230.03

-€13.62

FEULING OIL PUMP CORP. 18 mm Oxygen Sensor — Length 32 cm

High-precision zirconia ceramic oxygen sensor for reliable emissions control and improved fuel economy.

€52.99 €66.61

Transmission Pulley — 29-tooth, anodized

-€48.33

BELT DRIVES LTD. Transmission Pulley — 29-tooth, anodized

Lightweight replacement pulley for Big Twin models that improves throttle response; some installations require belt length or axle adjustments.

€187.92 €236.25

-€13.62

FEULING OIL PUMP CORP. 18 mm Oxygen Sensor — Black

Precision ceramic zirconium dioxide sensing element
Surface platinum electrodes and porous ceramic resist contamination
Prevents erosion and preserves accurate readings
Can restore fuel economy and drivability compared with slow sensors
Typical life: 30,000–50,000 miles; OE-level quality; made in the U.S.A.

€52.99 €66.61

-€9.83

DRAG SPECIALTIES Heavy-Duty Exhaust Flange Kit — Polished

Includes two flanges and two retaining rings; thicker flanges reduce distortion. Replacement retaining rings sold separately.

€27.80 €37.63

$Replacement Primary Drive Belt — 41.3 mm (1-5/8\"), 138 teeth$

-€32.70

BELT DRIVES LTD. Replacement Primary Drive Belt — 41.3 mm (1-5/8\"), 138 teeth

Replacement primary drive belt for BDL primary drives; direct-fit replacement for straightforward installation.

€127.16 €159.86

8mm Belt Drive — 8 mm, 132 teeth, 38.1 mm width, anodized

-€162.57

BELT DRIVES LTD. 8mm Belt Drive — 8 mm, 132 teeth, 38.1 mm width, anodized

Complete kit includes belt, clutch basket, front pulley, nut and washer. Inner clutch hub and plates sold separately. Made in the U.S.A. Not for use with offset primaries.

€632.24 €794.81

-€3.42

DRAG SPECIALTIES Exhaust Baffle — 21 cm (8-1/4"), 57.2 mm (2-1/4")

Fiberglass-wrapped steel construction; may require drilling in the exhaust pipe for installation.

€9.67 €13.09

8mm Belt Drive — 132 teeth, 38.1 mm (1-1/2")

-€139.64

BELT DRIVES LTD. 8mm Belt Drive — 132 teeth, 38.1 mm (1-1/2")

8mm belt drive kit includes belt, clutch basket, front pulley, nut and washer.

€543.06 €682.70

8mm Belt Drive — 8 mm (5/16 in), 132 teeth

-€139.64

BELT DRIVES LTD. 8mm Belt Drive — 8 mm (5/16 in), 132 teeth

Includes belt, clutch basket, front pulley, nut and washer. Inner clutch hub and plates sold separately. Not for use with offset primaries.

€543.06 €682.70

Exhaust Baffle — 76.2 mm (3") outside diameter, 20.5 cm (8") length

-€4.20

DRAG SPECIALTIES Exhaust Baffle — 76.2 mm (3") outside diameter, 20.5 cm (8")...

Reduces exhaust noise and improves backpressure. Fiberglass-wrapped construction; may require drilling for installation.

€11.85 €16.05

-€2.34

VANCE & HINES Exhaust Spring — A115SP, Silver

Replacement exhaust spring for securing pipes and minimizing vibration. Easy to install.

€6.61 €8.95

8mm Belt Drive — 8 mm (5/16"), 38.1 mm (1-1/2"), 132-tooth

-€139.64

BELT DRIVES LTD. 8mm Belt Drive — 8 mm (5/16"), 38.1 mm (1-1/2"), 132-tooth

Complete kit: belt, clutch basket, front pulley, nut & washer
Durable hard finish on pulley and clutch basket
Front pulley drilled and tapped for easy removal
Inner clutch hub and plates sold separately
Made in the U.S.A.; not for offset primaries

€543.06 €682.70

-€1.96

DRAG SPECIALTIES Exhaust Bracket Tab — U-08-0223, Zinc-plated

Bracket that secures the rear header pipe to the starter bracket exhaust mount for stable support and reduced vibration.

€5.55 €7.51

-€165.30

BELT DRIVES LTD. 11 mm Belt Drive — 38.1 mm, Anodized

Pulley and clutch basket are hard anodized aluminum; inner clutch hub and plates sold separately. Made in the U.S.A.

€642.84 €808.14

-€48.33

BELT DRIVES LTD. Transmission Pulley — 30T, Anodized

Lightweight replacement pulley reduces rotating mass and improves acceleration; includes spacer for '85-'93 when used on '85-'06 Big Twins. Made in the U.S.A.

€187.92 €236.25

-€48.33

BELT DRIVES LTD. Transmission Pulley — 33-tooth, Anodized

Lightweight replacement for '85–06 Big Twin applications; spacer included for '85–93 models. Made in USA.

€187.92 €236.25

-€102.15

BELT DRIVES LTD. Transmission Pulley — 34 tooth, anodized

Lightweight transmission pulley with hard-anodized finish; one-third the weight of stock. Includes spacer for '85–'06 Big Twin fitment on '85–'93 models. May require belt length and axle-slot adjustments.

€128.34 €230.49

$12 mm Oxygen Sensor — 12 mm thread, 73.5 cm (29\"), 4-wire, black$

-€18.49

FEULING OIL PUMP CORP. 12 mm Oxygen Sensor — 12 mm thread, 73.5 cm (29\"), 4-wire, black

High-precision zirconia oxygen sensor improves fuel economy, emissions, and drivability; meets or exceeds OE specifications.

€71.90 €90.39

-€18.49

FEULING OIL PUMP CORP. 12 mm Oxygen Sensor — 4-wire, 73.5 cm (29"), front

High-precision 12 mm oxygen sensor with stabilized zirconia element. Improves fuel economy and emissions, meets OE specs. Typical life 30,000–50,000 miles.

€71.90 €90.39

-€3.03

FEULING OIL PUMP CORP. O2 Sensor Adapters — 18 mm to 12 mm, Pair

Adapts larger O2 sensor ports to accept smaller sensors. Made in the U.S.A.

€11.80 €14.83

-€32.04

VANCE & HINES Pro Pipe Baffle — Black

Helps reduce exhaust noise while maintaining flow. Made in the U.S.A.

€155.91 €187.95

-€17.35

DRAG SPECIALTIES Woven Basalt Exhaust Wrap Kit — 7.6 m (25'), 50.8 mm (2"), bronze

High-temperature woven basalt exhaust wrap rated 1800°F continuous / 2500°F intermittent. Includes four 14" stainless steel ball-bearing, barb-locking ties; glossy bronze finish; made in the U.S.A.

€49.02 €66.37

-€31.11

BELT DRIVES LTD. Replacement Primary Drive Belt — 130 tooth, 41.3 mm (1-5/8")

Direct-fit replacement primary drive belt for BDL primary drives, engineered for reliable performance.

€120.98 €152.09

-€56.56

PAUGHCO Heat Shield — 57.2 mm (2-1/4") inside diameter, front/rear

Protects components from exhaust heat; includes 2-1/4" shields. Made in the U.S.A.

€219.94 €276.50

-€17.98

VANCE & HINES Quiet Baffle — Eliminator 400, 10 cm (4")

Optional quiet baffle for Eliminator 400.

€69.97 €87.95

-€23.86

VANCE & HINES Hi-Output 2-into-1 Quiet Baffle — Vance & Hines, 23086

Replacement baffle for Hi-Output 2-into-1 Short Exhaust System. Not compatible with 1800-2502 & 1800-2503.

€116.09 €139.95

-€7.02

DRAG SPECIALTIES Derby Cover — Chrome, 3-hole

Die-cast domed derby cover; includes mounting hardware. Some applications require gasket 0934-0289 or 0934-0788.

€19.83 €26.85

-€2.87

DRAG SPECIALTIES O2 Port Bushing Adapter — Adapts 18 mm to 12 mm

Adapter bushing for oxygen sensor ports that enables use of a smaller sensor. Precision machined for reliable fitment.

€6.15 €9.02

shop by category

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

Subcategories

HARLEY