HARLEY (4)

Battery Cable with Optional Shrink Tube — 4 AWG, 178 mm (7"), Black

-€3.73

DRAG SPECIALTIES Battery Cable with Optional Shrink Tube — 4 AWG, 178 mm (7"),...

Heavy-duty battery cable improves starter performance with an ultra-flexible, oil- and grease-resistant jacket and optional shrink tube for sealed connections.

€10.52 €14.25

-€77.98

LINDBY Front Multibar® — 32 mm (1-1/4"), Chrome

Highway bar with bonded rubber footrests, rounded corners, replaceable rubber pads, and easy installation.

€264.76 €342.74

Battery Cable with Optional Shrink Tube — 4 AWG, 203 mm (8"), ring terminal, black

-€3.82

DRAG SPECIALTIES Battery Cable with Optional Shrink Tube — 4 AWG, 203 mm (8"),...

High-performance battery cable with pure tinned copper strands and an oil- and grease-resistant flexible jacket.

€10.78 €14.60

-€57.12

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for tall riser-style handlebars. Includes extended brake line (if included), extended clutch and throttle cables, and all necessary wiring. Brake hoses use a PTFE liner with stainless steel braid. Dresser kits reuse the stock Throttle-By-Wire harness.

€222.16 €279.28

Battery Cable with Optional Shrink Tube — 4 AWG, 229 mm (9"), Black

-€3.63

DRAG SPECIALTIES Battery Cable with Optional Shrink Tube — 4 AWG, 229 mm (9"),...

Improves starter performance by delivering maximum current to the starter motor. Durable, oil- and grease-resistant jacket; optional heat-shrink sleeve included.

€10.26 €13.89

-€76.07

LINDBY Front Multibar® — 32 mm (1-1/4 in), black gloss powder-coated

Single-piece highway bar with bonded rubber footrests, rounded corners, replaceable pads, and easy installation. Not for extended forward controls.

€258.31 €334.38

-€52.84

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for Ape Hangers; includes extended brake, clutch and throttle cables plus all necessary wiring and hardware.

€205.50 €258.34

-€52.84

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for Burly Ape hangers. Includes extended brake line (when supplied), extended clutch and throttle/idle cables as required, plus all necessary wiring. Brake lines feature PTFE inner liner and stainless steel outer braid. Dresser kits reuse the stock Throttle-By-Wire harness.

€205.50 €258.34

$Battery Cable with Optional Shrink Tube — 4 AWG, 279 mm (11\"), Black$

-€3.80

DRAG SPECIALTIES Battery Cable with Optional Shrink Tube — 4 AWG, 279 mm...

Improves starter performance by supplying maximum current. Flexible strand construction with a heat- and oil-resistant jacket for durable, reliable service.

€10.74 €14.54

Magnum™ Quick Clamps — 32 mm (1-1/4"), clamp-on, stainless steel, chrome polished

-€13.73

KURYAKYN Magnum™ Quick Clamps — 32 mm (1-1/4"), clamp-on, stainless...

Hinged quick clamps for fast installation. All clamps include a 1/2" mounting hole for bolt/clevis mount. Durable stainless steel with a polished chrome appearance.

€53.40 €67.13

-€52.84

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for ape hanger-style handlebars. Includes extended brake, clutch, throttle and idle lines as required plus necessary wiring. Brake lines (when included) have a PTFE inner liner and stainless steel braid. Dresser kits reuse the stock Throttle-By-Wire harness.

€205.50 €258.34

Battery Cable with Optional Shrink Tube — 4 AWG, 13" (33 cm), Black

-€4.12

DRAG SPECIALTIES Battery Cable with Optional Shrink Tube — 4 AWG, 13" (33 cm),...

Improves starter motor performance
High-strand tinned conductors for flexibility
257°F-rated, oil- and grease-resistant ultra-flexible jacket

€11.65 €15.77

-€52.84

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete kit for Burly Ape hangers with extended clutch, throttle/idle cables, extended brake line when supplied, and all necessary wiring; based on use with 2" risers.

€205.50 €258.34

-€4.19

DRAG SPECIALTIES Battery Cable with Optional Shrink Tube — 4 AWG, 14", black

Improves starter performance by delivering maximum battery current. Durable, heat- and oil-resistant flexible jacket with an optional shrink tube for secure connections.

€11.84 €16.03

-€108.95

LINDBY Linbar® Highway Bar — 32 mm (1-1/4"), Chrome

Durable bolt-on highway bars with precision bends, neoprene o-rings, and rear bar compatibility with most stock exhausts. U.S. Patent #D361311.

€369.98 €478.93

-€52.84

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit with extended brake, clutch and throttle lines plus wiring; brake lines (when included) use PTFE inner liner and stainless steel braid.

€205.50 €258.34

-€76.07

LINDBY Front Multibar® — 32 mm (1-1/4"), Black

Single-piece highway bar with bonded rubber footrests, replaceable pads, and easy installation. Not recommended for extended forward controls or floorboards.

€258.31 €334.38

$Battery Cable with Optional Shrink Tube — 4 AWG, 18\", ring terminal, black$

-€4.95

DRAG SPECIALTIES Battery Cable with Optional Shrink Tube — 4 AWG, 18\", ring...

Increases starter performance by supplying maximum battery current. Pure electrolytic-grade tinned copper strands and an ultra-flexible, oil- and grease-resistant jacket. Optional shrink tube included.

€14.00 €18.95

-€5.08

DRAG SPECIALTIES Battery Cable with Optional Shrink Tube — 4 AWG, 20", Black

Delivers maximum starter current with a heat-rated, oil- and grease-resistant jacket for durable, flexible routing.

€14.38 €19.46

Battery Cable with Optional Shrink Tube — 4 AWG, 22" (56 cm), Black

-€4.47

DRAG SPECIALTIES Battery Cable with Optional Shrink Tube — 4 AWG, 22" (56 cm),...

Boosts starter performance with a flexible, high-conductivity cable and optional shrink tube for secure connections.

€12.65 €17.12

Longhorn Offset Footpeg Mounts — 64 mm (2-1/2") wide, 89 mm (3-1/2") long, 32 mm (1-1/4") clamp, Chrome, Polished

-€29.78

KURYAKYN Longhorn Offset Footpeg Mounts — 64 mm (2-1/2") wide, 89 mm...

Compact, curved offset mounts that keep pegs close to the bike. 360° adjustability with a 6-1/2" range, locking device to prevent rotation, and included Magnum clamps for easy installation.

€115.83 €145.61

-€7.44

DRAG SPECIALTIES Battery Cable Set — 4 AWG, Black

Complete set of battery cables to replace OEM wiring; increases starter performance and contains no auxiliary wires.

€21.05 €28.49

-€52.84

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for ape hanger handlebar setups; includes extended brake line (when applicable), clutch and throttle cables, wiring and hardware.

€205.50 €258.34

-€8.23

DRAG SPECIALTIES Battery Cable Set — 4 AWG, ring terminal, Black

Complete set to replace OEM cable routing and connections.
Tinned multi-strand conductors for improved flexibility and current transfer.
Boosts starter performance by supplying maximum current to the starter motor.
No auxiliary wires included for a focused installation.

€23.25 €31.48

-€7.89

DRAG SPECIALTIES Battery Cable Set — 4 AWG, Harley-Davidson®, Black

Complete battery cable kit to replace OEM cables and improve starter performance; no auxiliary wires included.

€22.31 €30.20

Magnum™ Quick Clamps — 25 mm (1") clamp, Chrome, Polished

-€13.97

KURYAKYN Magnum™ Quick Clamps — 25 mm (1") clamp, Chrome, Polished

Hinged design for fast installation. All clamps have a 1/2" mounting hole for clamp bolt or clevis mount.

€29.17 €43.14

-€52.84

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for ape hanger handlebars; includes extended brake, clutch, throttle/idle cables as required and necessary wiring. Brake lines (when supplied) have PTFE liner and stainless braid. Reuses stock Throttle-By-Wire harness where applicable.

€205.50 €258.34

Standard Stainless Braided Handlebar Cable/Brake Line Kit — 38–43 cm (15"–17"), Ape Hanger, stainless steel, natural clear-coate

-€53.29

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete stainless braided cable and brake line kit for handlebar swaps; includes brake and clutch lines, T junction, banjo bolts, fittings and copper crush washers. Made in the U.S.A.

€207.26 €260.55

Replacement Components for Custom Cable Kits — 7.6 m (25'), E25-0092CK-C

-€27.20

DRAG SPECIALTIES Replacement Components for Custom Cable Kits — 7.6 m (25'),...

Replacement components to repair or build custom-length cables; compatible with part numbers 2113-0671 and 2113-0672.

€76.88 €104.08

Standard Black Vinyl Handlebar Cable/Brake Line Kit — Ape Hanger fit, 12" - 14"

-€84.31

LA CHOPPERS Standard Black Vinyl Handlebar Cable/Brake Line Kit — Ape...

Complete handlebar cable and brake line kit with correct-length lines, chrome "T" junction, fittings and copper crush washers. Based on 2" risers for Ape Hanger swaps. Electrical extensions sold separately.

€327.90 €412.21

shop by category

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

Subcategories

HARLEY