HARLEY (4)

Run, Brake and Turn Signal Module — 12V, 8-pin OEM connector, Black

BADLANDS Run, Brake and Turn Signal Module — 12V, 8-pin OEM connector,...

Turns stock or custom turn signals into running and brake lights while preserving turn signal function. Built-in load equalizer, plug-in installation, made in the USA.

€94.01

CUSTOM DYNAMICS Smart Signal Stabilizer — 12V

Prevents hyper-flash when stock bulbs are removed or replaced with LED. Plug-and-play; one module required per motorcycle.

€66.83

Stainless Steel Brake Line Kit — 16" (40.5 cm), 25.5" (65 cm), silver, clear-coated

DRAG SPECIALTIES Stainless Steel Brake Line Kit — 16" (40.5 cm), 25.5" (65 cm),...

Braided lines with chrome fittings for improved brake feel and lasting durability. Made in the U.S.A.

€92.78

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for ape hanger handlebars; includes extended brake, clutch, throttle/idle cables as required and necessary wiring. Brake lines (when supplied) have PTFE liner and stainless braid. Reuses stock Throttle-By-Wire harness where applicable.

€198.92

CUSTOM DYNAMICS Smart Signal Stabilizer — Control module, 12V

Plug-and-play solution that prevents rapid turn signal flash when bulbs are removed or replaced with LEDs. One module required per motorcycle.

€78.56

CUSTOM DYNAMICS Smart Signal Stabilizer — 12V, Control Module, Turn Signal

Prevents hyperflashing when bulbs are removed or replaced with LED. One module needed per motorcycle. Plug-and-play installation.

€66.36

Standard Stainless Braided Handlebar Cable/Brake Line Kit — 38–43 cm (15"–17"), Ape Hanger, stainless steel, natural clear-coate

LA CHOPPERS Standard Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete stainless braided cable and brake line kit for handlebar swaps; includes brake and clutch lines, T junction, banjo bolts, fittings and copper crush washers. Made in the U.S.A.

€200.63

Magic Strobes™ Brake Light Flasher — 12 V, 57.2 mm x 31.8 mm x 12.7 mm

CUSTOM DYNAMICS Magic Strobes™ Brake Light Flasher — 12 V, 57.2 mm x 31.8 mm x...

Slimline flasher with 10 selectable strobe/flash patterns, compatible with stock LED brake lights, sealed housing and built-in protections.

€80.21

Designer Series Front Lower Brake Line Kit — Dual-disc, without ABS, Chrome

MAGNUM SHIELDING Designer Series Front Lower Brake Line Kit — Dual-disc,...

Direct-fit front lower brake line kit with PTFE tubing, Kevlar aramid reinforcement and AN-3 fittings for simplified installation; compatible with ABS and non-ABS systems.

€110.43

BADLANDS Run, Brake and Turn Signal Module — 12V, 8 pins, OEM style

Adds running and brake lights to stock or custom turn signals while preserving turn signal function. Plug-in connectors and simple instructions for select models. Made in the USA.

€111.21

Designer Series Braided Non-ABS Front Brake Line Kit — 21", 10 mm 180° banjo, Chrome

MAGNUM SHIELDING Designer Series Braided Non-ABS Front Brake Line Kit — 21", 10...

Superior two-piece design with direct-fit lower assembly
All-brazed manifold for leak-free, clean appearance
PTFE inner tubing with aramid braid reduces expansion
AN-3 fittings for straightforward installation

€41.55

Alternate Length Designer Series Braided Non-ABS Front Upper Brake Line Kit — 23" length, 10 mm banjo

MAGNUM SHIELDING Alternate Length Designer Series Braided Non-ABS Front Upper...

Two-piece braided brake line kit with brazed manifold construction and crystal-clear outer jacket. AN-3 connections for easy installation. Made in the U.S.A. For certain models, one upper and lower kit is required — two kits per bike.

€49.68

BADLANDS Hard-Wire CAN Bus Load Equalizer — 12V

Stops erratic front turn-signal blinking. Compatible with halogen and LED front signals, solid-state waterproof module, parade-safe with no heat, works with OEM alarm/turn-signal modules, made in the USA.

€54.66

Plug-In Style Turn Signal Load Equalizer™ III — 12V, OEM-style connector

BADLANDS Plug-In Style Turn Signal Load Equalizer™ III — 12V, OEM-style...

Solid-state, waterproof plug-in module that eliminates erratic blinking on self-canceling turn signals. One module required per signal pair.

€64.21

Designer Series Braided Non-ABS Front Brake Line Kit — 25" (63.5 cm), 10 mm 90° banjo, Chrome Sterling Chromite II

MAGNUM SHIELDING Designer Series Braided Non-ABS Front Brake Line Kit — 25"...

Two-piece braided front brake line kit for non-ABS systems with brazed manifold, PTFE inner tubing reinforced with aramid, and AN-3 fittings. Made in the U.S.A.

€52.68

BADLANDS Plug-In Style Turn Signal Load Equalizer™ III — 12V

Eliminates erratic blinking; plug‑in module for use with OEM alarm/TSM; solid-state sealed design; one module per signal pair.

€65.65

Standard Black Vinyl Handlebar Cable/Brake Line Kit — Ape Hanger fit, 12" - 14"

LA CHOPPERS Standard Black Vinyl Handlebar Cable/Brake Line Kit — Ape...

Complete handlebar cable and brake line kit with correct-length lines, chrome "T" junction, fittings and copper crush washers. Based on 2" risers for Ape Hanger swaps. Electrical extensions sold separately.

€317.41

BADLANDS Plug-In Style Turn Signal Load Equalizer™ III — 12V, OEM Style

Solid-state waterproof module that eliminates erratic blinking for custom and OEM turn signals. One module per pair.

€77.23

Alternate Length Designer Series Braided Non-ABS Front Upper Brake Line Kit — 27", Chrome, 10 mm 90° banjo fitting

MAGNUM SHIELDING Alternate Length Designer Series Braided Non-ABS Front Upper...

Braided front upper brake line kit for non-ABS models. Two-piece design with brazed manifold and crystal-clear outer jacket. One upper + lower kit required; two kits per bike.

€52.03

BADLANDS Plug-In Style Turn Signal Load Equalizer™ III — 12V

Plugs into OEM wiring to eliminate hyperflash and erratic turn-signal blinking; waterproof solid-state module. One module per pair.

€77.23

GOODRIDGE Deluxe Professional Ferrules — -3 hose fitting, Chrome, 10-pack

Replacement parts for brake line builder kits.

€15.43

Six-Piston Differential-Bore Front Caliper — 292 mm (11-1/2"), 6 piston, Chrome

PERFORMANCE MACHINE (PM) Six-Piston Differential-Bore Front Caliper — 292 mm (11-1/2"),...

Six-piston differential-bore front caliper for dual-disc setups; includes pads and hardware.

€450.14

NAMZ Run, Brake and Turn Signal Module — 12 V, Black

Converts turn signals into running and brake lights while retaining turn function. Built-in load equalizer handles stock and small custom LEDs. Plug-in connectors and simple instructions for select models. Increases rear visibility. Made in the USA.

€133.63

$Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers — 33 cm (13\"), Ape Hanger, Black$

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for Burly Ape hangers; includes extended brake, clutch, throttle/idle cables and all required wiring for a full handlebar swap.

€129.72

PERFORMANCE MACHINE (PM) Brake Caliper Replacement Components — 125 x 4R, 4-piston, Chrome

Replacement components for use with Performance Machine brake calipers. Sold each.

€301.59

BURLY BRAND Complete Stainless Braided Handlebar Cable/Brake Line Kit —...

Complete installation kit with extended brake, clutch and throttle cables plus wiring for ape hanger setups using 2" risers. PTFE-lined brake hose and braided outer layer; reuses stock Throttle-By-Wire harness where applicable.

€322.59

CUSTOM DYNAMICS TruFLEX® Flexible LED Strip Dual Converter — 40 LED, TruFLEX II®

Converts Custom Dynamics® Red Plasma Rods™ to dual function for running and signal modes.

€4.62

CUSTOM DYNAMICS ProBEAM® Eclipze® Signal Converter — Accent light, Pair, PB-EPZ

Keeps ProBEAM running-light pipes illuminated while producing full-contrast brake and turn-signal flashes; plug-and-play installation.

€34.20

Six-Piston Differential-Bore Front Caliper — 6-piston, 292 mm (11-1/2"), anodized black, left

PERFORMANCE MACHINE (PM) Six-Piston Differential-Bore Front Caliper — 6-piston, 292 mm...

Designed for dual-disc Harley-Davidson applications; includes pads, bleeder screw and 3/8"-24 banjo bolt. Made in the U.S.A.

€450.14

Four-Piston Differential-Bore Caliper — 292 mm (11-1/2"), Front Left, Black

PERFORMANCE MACHINE (PM) Four-Piston Differential-Bore Caliper — 292 mm (11-1/2"),...

Differential-bore caliper with progressive pad force. Includes brake pads, bleeder screw and 3/8"-24 banjo bolt. Dual-disc setups require separate left and right calipers. Made in the U.S.A. Will not fit FXD, FXR, XL models with spoke wheels.

€405.05

shop by category

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

Subcategories

HARLEY