HARLEY (30)

-€7.01

NAMZ O2 Sensor Harness Extension — adapts 18 mm to 12 mm

Adapts 18 mm O2 sensor bungs to 12 mm; pre-assembled wiring harness with connector pins; plug-and-play installation; made in the United States.

€21.02 €28.03

-€3.94

BASSANI XHAUST O2 Sensor Port Plugs — M18 x 1.5

Seals unused O2 sensor ports on non-sensor HD models. Sold in pairs and made in the U.S.A.

€11.14 €15.08

O2 Sensor Port Plugs — 12 mm, 1.25 mm, Pair

-€3.94

BASSANI XHAUST O2 Sensor Port Plugs — 12 mm, 1.25 mm, Pair

Plugs that seal unused O2 sensor ports on non-sensor HD models. Sold in pairs. Made in the U.S.A.

€11.14 €15.08

Sound Reduction Kit — Quiet Insert Kit, for 3" HP-Plus® mufflers, 6-1/2" resonator

-€8.39

KHROME WERKS Sound Reduction Kit — Quiet Insert Kit, for 3" HP-Plus®...

Bolt-in sound reduction for 3" HP-Plus® mufflers; reduces ~4 dB at idle and improves low-end torque; kit includes discs, bolts and nuts.

€32.61 €41.00

-€1.80

DRAG SPECIALTIES Rubber Muffler Mounts — Black

High-quality replacement component. Support kit and replacement bracket sold separately. Sold in pairs.

€5.09 €6.89

-€17.20

ACCEL High-Temperature Exhaust Wrap — 50' (15.2 m), 1" (25.4 mm), Gold

High-temperature exhaust wrap made from crushed volcanic rock; 25% stronger than typical fiberglass wraps. Weather and chemical resistant.

€66.85 €84.05

-€3.11

DAYTONA TWIN TEC LLC Weld-In O2 Sensor Bung — 18 mm x 1.5 mm

Weld-in bung that allows easy installation of O2 sensors. Made in the U.S.A.

€12.09 €15.20

-€3.08

DAYTONA TWIN TEC LLC O2 Sensor Plug — 12 mm thread, 1.25 mm pitch

Easy-install plug for oxygen sensor ports. Sold individually. Made in the U.S.A.

€11.98 €15.06

-€3.08

DAYTONA TWIN TEC LLC O2 Sensor Plug — 18 mm thread, 1.5 mm pitch

Allows easy installation of oxygen sensors. Sold individually. Made in the U.S.A.

€11.98 €15.06

-€13.62

FEULING OIL PUMP CORP. 18 mm Oxygen Sensor — Length 32 cm

High-precision zirconia ceramic oxygen sensor for reliable emissions control and improved fuel economy.

€52.99 €66.61

-€13.62

FEULING OIL PUMP CORP. 18 mm Oxygen Sensor — Black

Precision ceramic zirconium dioxide sensing element
Surface platinum electrodes and porous ceramic resist contamination
Prevents erosion and preserves accurate readings
Can restore fuel economy and drivability compared with slow sensors
Typical life: 30,000–50,000 miles; OE-level quality; made in the U.S.A.

€52.99 €66.61

-€9.83

DRAG SPECIALTIES Heavy-Duty Exhaust Flange Kit — Polished

Includes two flanges and two retaining rings; thicker flanges reduce distortion. Replacement retaining rings sold separately.

€27.80 €37.63

-€3.42

DRAG SPECIALTIES Exhaust Baffle — 21 cm (8-1/4"), 57.2 mm (2-1/4")

Fiberglass-wrapped steel construction; may require drilling in the exhaust pipe for installation.

€9.67 €13.09

Exhaust Baffle — 76.2 mm (3") outside diameter, 20.5 cm (8") length

-€4.20

DRAG SPECIALTIES Exhaust Baffle — 76.2 mm (3") outside diameter, 20.5 cm (8")...

Reduces exhaust noise and improves backpressure. Fiberglass-wrapped construction; may require drilling for installation.

€11.85 €16.05

-€2.34

VANCE & HINES Exhaust Spring — A115SP, Silver

Replacement exhaust spring for securing pipes and minimizing vibration. Easy to install.

€6.61 €8.95

-€1.96

DRAG SPECIALTIES Exhaust Bracket Tab — U-08-0223, Zinc-plated

Bracket that secures the rear header pipe to the starter bracket exhaust mount for stable support and reduced vibration.

€5.55 €7.51

$12 mm Oxygen Sensor — 12 mm thread, 73.5 cm (29\"), 4-wire, black$

-€18.49

FEULING OIL PUMP CORP. 12 mm Oxygen Sensor — 12 mm thread, 73.5 cm (29\"), 4-wire, black

High-precision zirconia oxygen sensor improves fuel economy, emissions, and drivability; meets or exceeds OE specifications.

€71.90 €90.39

-€18.49

FEULING OIL PUMP CORP. 12 mm Oxygen Sensor — 4-wire, 73.5 cm (29"), front

High-precision 12 mm oxygen sensor with stabilized zirconia element. Improves fuel economy and emissions, meets OE specs. Typical life 30,000–50,000 miles.

€71.90 €90.39

-€3.03

FEULING OIL PUMP CORP. O2 Sensor Adapters — 18 mm to 12 mm, Pair

Adapts larger O2 sensor ports to accept smaller sensors. Made in the U.S.A.

€11.80 €14.83

-€32.04

VANCE & HINES Pro Pipe Baffle — Black

Helps reduce exhaust noise while maintaining flow. Made in the U.S.A.

€155.91 €187.95

-€17.35

DRAG SPECIALTIES Woven Basalt Exhaust Wrap Kit — 7.6 m (25'), 50.8 mm (2"), bronze

High-temperature woven basalt exhaust wrap rated 1800°F continuous / 2500°F intermittent. Includes four 14" stainless steel ball-bearing, barb-locking ties; glossy bronze finish; made in the U.S.A.

€49.02 €66.37

-€56.56

PAUGHCO Heat Shield — 57.2 mm (2-1/4") inside diameter, front/rear

Protects components from exhaust heat; includes 2-1/4" shields. Made in the U.S.A.

€219.94 €276.50

-€17.98

VANCE & HINES Quiet Baffle — Eliminator 400, 10 cm (4")

Optional quiet baffle for Eliminator 400.

€69.97 €87.95

-€23.86

VANCE & HINES Hi-Output 2-into-1 Quiet Baffle — Vance & Hines, 23086

Replacement baffle for Hi-Output 2-into-1 Short Exhaust System. Not compatible with 1800-2502 & 1800-2503.

€116.09 €139.95

-€2.87

DRAG SPECIALTIES O2 Port Bushing Adapter — Adapts 18 mm to 12 mm

Adapter bushing for oxygen sensor ports that enables use of a smaller sensor. Precision machined for reliable fitment.

€6.15 €9.02

-€12.65

VANCE & HINES Super Quiet Baffle — Vance & Hines

Quiet baffle that reduces high-frequency noise while preserving a deep rumble.

€61.58 €74.23

-€4.60

DRAG SPECIALTIES FXR Exhaust Mount Front Bracket — Chrome

Front exhaust bracket for FXR frames; suited for custom frame applications.

€13.00 €17.60

Quiet Baffle — Mini-Grenades, Vance & Hines

-€14.14

VANCE & HINES Quiet Baffle — Mini-Grenades, Vance & Hines

Optional quiet baffle for compatible grenade-style exhausts. Made in the U.S.A.

€68.84 €82.98

-€10.38

VANCE & HINES Quiet Baffles — Hi-Output

Optional quiet baffle reduces exhaust noise while maintaining flow. Easy to install.

€50.57 €60.95

Baffle — Eliminator 300, Stainless Steel

-€8.98

VANCE & HINES Baffle — Eliminator 300, Stainless Steel

Noise-reducing baffle insert for motorcycle exhausts; easy to install and remove.

€34.97 €43.95

shop by category

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

Subcategories

HARLEY