HARLEY (2)

Electric Easy Shift™ Speed Shifter Kit — Chrome, for floorboards

Out of Stock

PINGEL Electric Easy Shift™ Speed Shifter Kit — Chrome, for floorboards

Electronic system that lets you shift up or down with a handlebar button; clutch only for start/stop. Includes handlebar control, shift cylinder, support bracket and control module. Not for 4‑speed transmissions.

€1,504.43

Electric Easy Shift™ Speed Shifter Kit — Chrome, for forward controls

Out of Stock

PINGEL Electric Easy Shift™ Speed Shifter Kit — Chrome, for forward...

Smooth, clutchless shifting at the push of a button; retains OEM shifting and includes easy-install hardware and instructions.

€1,504.43

Electric Easy Shift™ Speed Shifter Kit — with mid-mount controls, chrome

Out of Stock

PINGEL Electric Easy Shift™ Speed Shifter Kit — with mid-mount...

Button‑actuated electronic kit that allows smooth up/down shifts; clutch only needed for start/stop. Retains OEM shifting. Not for 4‑speed transmissions.

€1,504.43

Out of Stock

DRAG SPECIALTIES Stealth I Mirror — 5/16"-18, 12 cm (4-3/4"), Black

Low-profile oval mirror head with a slim stem for a clean, minimalist look. Stud-style mounting or included chrome socket-head Allen bolts for custom installs. Fits most OEM-style heads; mounts on clutch or brake lever housings.

€26.01

Out of Stock

CUSTOM CYCLE ENGINEERING Pivot Shaft

The Pivot Shaft stabilizes swing arm movement to enhance control at all speeds and features durable metal bushings with rubber isolators.

€636.97

Electric Easy Shift™ Speed Shifter Kit — Chrome, for mid-mount controls

Out of Stock

PINGEL Electric Easy Shift™ Speed Shifter Kit — Chrome, for mid-mount...

Electronically suspends ignition for smooth push-button up and down shifts. Retains OEM shifting; not suitable for 4-speed transmissions.

€1,601.45

Stealth II Mirror — 5" oval head, 6" stem, 5/16"-18 thread, Black powder-coated

Out of Stock

DRAG SPECIALTIES Stealth II Mirror — 5" oval head, 6" stem, 5/16"-18 thread,...

Low-profile Stealth II Mirror with stud-style mounting or supplied chrome Allen bolts; flat tinted head for drag bars; stainless hardware.

€24.14

Out of Stock

CUSTOM CYCLE ENGINEERING Pivot Shaft

The Pivot Shaft stabilizes swing arm movement to enhance control at all speeds and features durable metal bushings with rubber isolators.

€636.97

Stealth I Mirror — 5/16"-18 thread, 12 cm stem, Black powder-coated

Out of Stock

DRAG SPECIALTIES Stealth I Mirror — 5/16"-18 thread, 12 cm stem, Black...

Low-profile Stealth I mirror with stud-style or socket-head Allen mounting. Fits Stealth and most OEM-style mirror heads; stainless-steel hardware and anti-glare blue tint.

€25.09

Out of Stock

CUSTOM CYCLE ENGINEERING Pivot Shaft

The Pivot Shaft stabilizes swing arm movement to enhance control at all speeds and features durable metal bushings with rubber isolators.

€636.97

$Universal Shifter Kit — fits 7/8\" or 1\" handlebars, Chrome$

Out of Stock

PINGEL Universal Shifter Kit — fits 7/8\" or 1\" handlebars, Chrome

Reliable clamp-on shifter kit for common handlebars; supplemental brackets may be required (sold separately).

€1,296.45

Flame Teardrop Mirrors with Sculptured Stem — Black powder-coated, 64 mm H, 135 mm W, 150 mm stem

Out of Stock

DRAG SPECIALTIES Flame Teardrop Mirrors with Sculptured Stem — Black...

Teardrop flame side mirrors with sculptured stem. Die-cast aluminum construction and mounting hardware included. Sold as a pair.

€82.19

Stalker Shift Linkage Rod — 330 mm (13") , Black

Out of Stock

JOKER MACHINE Stalker Shift Linkage Rod — 330 mm (13") , Black

Stainless heim joints at each end; adjustable from 12" to 13" center-to-center; 5/16" mounting holes. Made in the USA.

€112.62

Out of Stock

KURYAKYN Deluxe Neck Cover Kit

The Deluxe Neck Cover Kit enhances your motorcycle's appearance with easy-to-install covers that extend down the frame and accommodate specific features found in Road King models.

€181.97

Out of Stock

KURYAKYN Zombie Front Shift Arm Cover — Chrome

Brightens the stock shifter arm; easy bolt-on installation.

€45.60

Out of Stock

HOGTUNES Rear Speaker Pods — 133 mm (5-1/4"), Black vinyl

Labeled wiring and speaker pods that simplify adding speakers to a tour pack. Vinyl covering matches stock finish for an OEM look.

€129.71

Out of Stock

HOGTUNES Amplifier Mounting Kit — Harley-Davidson®, Black

Mounts a 2-channel amp between the radio and the brake-side speaker. Kit includes mounting plate and hardware. Some trimming may be required with aftermarket fairing support brackets.

€25.71

Out of Stock

KLOCK WERKS Lower Fillers

Lower Fillers are designed to fill the gap between the lower fender and saddlebags, enhancing the overall aesthetic of your Harley-Davidson. Made from durable 16-gauge steel and includes installation hardware.

€118.33

Out of Stock

KURYAKYN Down Tube Covers

Stylish chrome covers for Harley-Davidson down tubes with easy snap-on installation.

€59.23

Out of Stock

CYCLE VISIONS Bagger-Tail Filler Panels

Bagger-Tail Filler Panels are made from durable 16-gauge cold-rolled steel, designed for use with Bagger Tail brackets and compatible with fiberglass or ABS hard bags.

€198.72

Out of Stock

KURYAKYN Saddle Shields

Frame-mounted polycarbonate shields designed to redirect engine heat for a more comfortable ride.

€71.63

Shifter Linkage — 13-3/4" (34.93 cm), 5/16-24 stud / 5/16" hole, chrome

Out of Stock

DRAG SPECIALTIES Shifter Linkage — 13-3/4" (34.93 cm), 5/16-24 stud / 5/16"...

Steel construction. Available in chrome or black. Custom round heim joint end with 5/16" hole and/or ball joint ends with 5/16"-24 stud. Rod lengths measured center-to-center with adjusters collapsed. Sold each.

€38.15

Out of Stock

KURYAKYN Boomerang Frame Covers

High-quality chrome metal covers designed for Harley-Davidson models, offering complete coverage of frame edges.

€102.01

Shifter Linkage — 31.1 cm (12-1/4"), 5/16-24 stud, 5/16" hole, Chrome

Out of Stock

DRAG SPECIALTIES Shifter Linkage — 31.1 cm (12-1/4"), 5/16-24 stud, 5/16" hole,...

Durable metal linkage with round heim and ball joint end options; adjustable center-to-center rod measurement for precise fitment.

€20.64

Out of Stock

KURYAKYN Deluxe Neck Cover Kit

Enhance your ride with the Deluxe Neck Cover Kit, designed for quick installation and perfect coverage.

€193.80

Out of Stock

DRAG SPECIALTIES Shifter Linkage — 8-1/4" length, 5/16-24 stud, 5/16" hole, chrome

Precision shifter linkage with round heim or ball joint ends, center-to-center measurement, sold each.

€21.39

$Shifter Linkage — 12-1/4\", 5/16-24 stud, 5/16\" hole, Chrome$

Out of Stock

DRAG SPECIALTIES Shifter Linkage — 12-1/4\", 5/16-24 stud, 5/16\" hole, Chrome

Durable steel shifter linkage with custom heim or ball joint options. Rod lengths measured center-to-center; sold each.

€32.74

Out of Stock

DRAG SPECIALTIES Frame Inserts

Enhance your Softail frame with this four-piece steel insert set.

€14.05

Shifter Linkage — 4-3/8" (11.11 cm), 5/16-24 stud / 5/16" hole, chrome

Out of Stock

DRAG SPECIALTIES Shifter Linkage — 4-3/8" (11.11 cm), 5/16-24 stud / 5/16"...

Steel construction. Available in chrome finish or black. Custom round heim joint with 5/16" hole or ball joint with 5/16"-24 stud. Rod lengths measured center-to-center with adjusters collapsed. Sold each.

€34.59

Out of Stock

DRAG SPECIALTIES Teardrop Mirror — 12.5 cm (5"), 89 mm (3-1/2"), Screw-In

Plain glass mirror head. Includes mounting hardware. Requires mirror adapter. Universal fit. Designed by Tank Tuff Cycles, available from Drag Specialties.

€28.36

shop by category

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

Subcategories

HARLEY