HARLEY (2)

Out of Stock

DRAG SPECIALTIES Fender Luggage Rack — 3/8" diameter, 10 lb capacity

Compact rear fender luggage rack that mounts to the stock seat mounting screw and license plate bracket. Hardware and instructions included.

€35.94

Out of Stock

MOTOGADGET Mounting Bracket — Anodized aluminum

Milled billet bracket to mount the Motoscope Mini to the rockerbox; includes mounting hardware and instructions. Not recommended for high-heat engines.

€25.88

Electric Easy Shift™ Speed Shifter Kit — Chrome, for floorboards

Out of Stock

PINGEL Electric Easy Shift™ Speed Shifter Kit — Chrome, for floorboards

Electronic system that lets you shift up or down with a handlebar button; clutch only for start/stop. Includes handlebar control, shift cylinder, support bracket and control module. Not for 4‑speed transmissions.

€1,504.43

$Fender Luggage Rack — 23.5 cm (9-1/4\"), 9.5 mm (3/8\"), Black gloss, powder-coated$

Out of Stock

DRAG SPECIALTIES Fender Luggage Rack — 23.5 cm (9-1/4\"), 9.5 mm (3/8\"), Black...

Rear fender luggage rack — steel tubing construction; mounts to stock seat mounting screw and license plate bracket. Mounting hardware and instructions included.

€43.53

True Dual Headpipes — Chrome, 1.75 in, 2-into-2 system

Out of Stock

COBRA True Dual Headpipes — Chrome, 1.75 in, 2-into-2 system

One-piece, full-length 2.5-inch heat shields; includes head pipes, shields, and mounting hardware. 1.75-inch diameter fits stock and most aftermarket mufflers. Includes oxygen sensor bungs. Does not include mufflers.

€550.84

Electric Easy Shift™ Speed Shifter Kit — Chrome, for forward controls

Out of Stock

PINGEL Electric Easy Shift™ Speed Shifter Kit — Chrome, for forward...

Smooth, clutchless shifting at the push of a button; retains OEM shifting and includes easy-install hardware and instructions.

€1,504.43

Out of Stock

MOTHERWELL 7" Solo Luggage Rack — 18 cm (7"), 28 cm (11"), Black

Bigger, beefier solo luggage rack that maintains style. Outside rails .065" tubing; inside rails 3/8" solid steel. Stainless steel finish. Made in the USA.

€188.72

Out of Stock

PAUL YAFFE BAGGER NATION Dash Kit for 6 Gallon Tank — Chrome

One-piece bolt-on dash kit for 6 gallon tanks. Includes pop-up gas cap, rubber trim and mounting hardware.

€284.82

Electric Easy Shift™ Speed Shifter Kit — with mid-mount controls, chrome

Out of Stock

PINGEL Electric Easy Shift™ Speed Shifter Kit — with mid-mount...

Button‑actuated electronic kit that allows smooth up/down shifts; clutch only needed for start/stop. Retains OEM shifting. Not for 4‑speed transmissions.

€1,504.43

Out of Stock

PAUL YAFFE BAGGER NATION Dash Kit for 6 Gallon Tank — 6 gal, black gloss

One-piece bolt-on dash; no welding. Includes chrome pop-up gas cap, rubber trim and hardware.

€195.54

Electric Easy Shift™ Speed Shifter Kit — Chrome, for mid-mount controls

Out of Stock

PINGEL Electric Easy Shift™ Speed Shifter Kit — Chrome, for mid-mount...

Electronically suspends ignition for smooth push-button up and down shifts. Retains OEM shifting; not suitable for 4-speed transmissions.

€1,601.45

Out of Stock

DRAG SPECIALTIES Tee-Bar Gauge Mounts — 32 mm (1-1/4"), Black gloss

Two-piece clamp-on gauge mounts for Tee-Bar setups. Billet aluminum construction. Sold without cups; may require an OEM gasket. Not for use with XL880C/1200C OEM gauge.

€145.94

Tee-Bar Gauge Mounts — 32 mm (1-1/4") T-Bars, 3-1/2" on-center pullback, Black

Out of Stock

DRAG SPECIALTIES Tee-Bar Gauge Mounts — 32 mm (1-1/4") T-Bars, 3-1/2" on-center...

Two-piece clamp-on gauge mount for Tee-style handlebars. Made in the USA. Not compatible with XL880C/1200C OEM gauge. Sold without cups; may require OEM gasket.

€147.30

Radial Sweepers Exhaust System — Chrome, 2-Into-2 System

Out of Stock

BASSANI XHAUST Radial Sweepers Exhaust System — Chrome, 2-Into-2 System

Performance stepped headers with radial rear section, fabricated from 16-gauge double-wall steel. Direct bolt-on design for easy installation. Will not fit with passenger footpegs installed. Tuner recommended.

€588.36

$Universal Shifter Kit — fits 7/8\" or 1\" handlebars, Chrome$

Out of Stock

PINGEL Universal Shifter Kit — fits 7/8\" or 1\" handlebars, Chrome

Reliable clamp-on shifter kit for common handlebars; supplemental brackets may be required (sold separately).

€1,296.45

M8 Softail Gauge Mount For Performance Risers — Black anodized, single gauge

Out of Stock

LA CHOPPERS M8 Softail Gauge Mount For Performance Risers — Black...

Accepts OE square-design digital gauges and installs direct bolt-on with compatible performance risers (sold separately).

€146.85

Out of Stock

DRAG SPECIALTIES Quick Detach Tour Box Mount — Black gloss, fits Dresser models

Quick-release mount for Tour Box on Dresser models; includes hardware and is drilled for '06+ bolt pattern.

€134.33

M8 Softail Gauge Mount for Performance Risers — single gauge, unfinished

Out of Stock

LA CHOPPERS M8 Softail Gauge Mount for Performance Risers — single gauge,...

Accepts OE square-design digital gauges; direct bolt-on installation. Fits M8 Softail when used with compatible performance risers (sold separately). Made in the U.S.A.

€146.85

Shortshots Staggered Exhaust System — 1-3/4" headpipes, slash-cut ends, Black

Out of Stock

VANCE & HINES Shortshots Staggered Exhaust System — 1-3/4" headpipes,...

Compact, high-performance system with removable baffles; includes hardware and instructions; made in the U.S.A.

€526.72

Stalker Shift Linkage Rod — 330 mm (13") , Black

Out of Stock

JOKER MACHINE Stalker Shift Linkage Rod — 330 mm (13") , Black

Stainless heim joints at each end; adjustable from 12" to 13" center-to-center; 5/16" mounting holes. Made in the USA.

€112.62

Gauge Mount for Performance Risers — fits 1" and 1.25" risers, black anodized

Out of Stock

LA CHOPPERS Gauge Mount for Performance Risers — fits 1" and 1.25" risers,...

Single-gauge mount with direct bolt-on installation; fits 1" and 1.25" straight and pullback risers. Made in the U.S.A.

€156.64

PowerPro HP 2:1 Exhaust System — 3-1/2" muffler, chrome

Out of Stock

COBRA PowerPro HP 2:1 Exhaust System — 3-1/2" muffler, chrome

Sleek cylindrical muffler body inspired by megaphone styling
Machined billet tip with polished finish
Internal cooling to minimize bluing
Double-insulated body with removable baffle
Made in the U.S.A.

€767.47

Quick Detach Tour Box Mount — Quick Detach, Tour Pack, Black gloss

Out of Stock

DRAG SPECIALTIES Quick Detach Tour Box Mount — Quick Detach, Tour Pack, Black...

Quick-release mount for easy removal of the Tour Box on Dresser models; includes mounting hardware and fits '06 and later Tour Box.

€157.04

Out of Stock

LA CHOPPERS Gauge Mount for Performance Risers — fits 1" and 1.25" risers

Direct bolt-on installation
Fits 1" and 1.25" straight and pullback risers
Made in the U.S.A.

€156.64

Out of Stock

COBRA PowerPro HP 2:1 Exhaust System — 3.5" muffler, Chrome

Sleek 3-1/2" cylindrical muffler body with megaphone heritage. Delicately machined chromed billet tip. Internal cooling prevents bluing. Double-insulated body and removable baffle. Made in the U.S.A.

€767.47

Out of Stock

KURYAKYN Zombie Front Shift Arm Cover — Chrome

Brightens the stock shifter arm; easy bolt-on installation.

€45.60

Out of Stock

MOTHERWELL 7" Solo Luggage Rack — 7" wide, 11" long, black matte

Beefier solo luggage rack that complements larger fenders, with heavy outside rails and solid inside rails for secure cargo.

€149.41

Gauge Mount for Performance Risers — fits 1" and 1.25" straight and pullback risers, Black anodized

Out of Stock

LA CHOPPERS Gauge Mount for Performance Risers — fits 1" and 1.25"...

Dual gauge mount with direct bolt-on installation; fits 1" and 1.25" straight and pullback risers.

€195.83

Out of Stock

COBRA Speedster Slashdown Exhaust System — Chrome, 2-Into-2 system

Classic shotgun styling with modern crossover technology for class-leading power gains and full-length 222° heat shields.

€750.51

Gauge Mount for Performance Risers — fits 1" and 1.25" risers, unfinished

Out of Stock

LA CHOPPERS Gauge Mount for Performance Risers — fits 1" and 1.25" risers,...

Precision gauge bracket for performance risers; direct bolt-on installation; fits 1" and 1.25" straight and pullback risers; sold individually; made in the U.S.A.

€195.83

shop by category

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

Subcategories

HARLEY