Best sellers

Tab-Tite™ Spring Loaded Holder — fits 7–8 in tablets, Black

-€5.97

RAM MOUNTS Tab-Tite™ Spring Loaded Holder — fits 7–8 in tablets, Black

Spring-loaded holder secures 7–8 in tablets with a case; compatible with B and C size RAM® round ball bases; made from high-strength composites.

€23.24 €29.21

-€17.88

TRW SV Series Sindered Brake Pads — 91.5 mm, 58.1 mm, 7 mm

Sintered metal front brake pads that provide consistent, reliable braking for compatible motorcycles.

€23.52 €41.40

Brake Rotor Fixed Round — 300 mm, 5.0 mm thickness, One-piece, Silver

-€14.43

TRW Brake Rotor Fixed Round — 300 mm, 5.0 mm thickness, One-piece,...

High-performance laser-cut silhouette, low wear under stress, prevents pad glazing, stable thermal behavior.

€83.27 €97.70

-€4.57

DYNATEK Tachometer Adapter — T-101

Restores accurate tachometer readings after single-fire ignition conversions.

€17.80 €22.37

-€47.53

NAMZ Twist Grip Sensor — Harley-Davidson, throttle-by-wire

Direct replacement twist-grip sensor with pre-installed MIL‑SPEC terminals and hardwired harness connection.

€134.34 €181.87

-€17.67

NAMZ OEM-Type Connector — 36-pin ECM connector, male, gray

Compact OEM-style connector engineered for reliable performance and long service life. Made in the U.S.A.

€53.00 €70.67

AMP Mate-n-Lock Connector — 12-pin, male, white

-€1.29

NAMZ AMP Mate-n-Lock Connector — 12-pin, male, white

Top-quality OEM-style replacement connectors and terminals. Easy to use. Made in the USA.

€3.86 €5.15

AMP Mate-N-Lok Wiring Connector — 12-pin, 305 mm (12"), white

-€0.77

NAMZ AMP Mate-N-Lok Wiring Connector — 12-pin, 305 mm (12"), white

Top-quality OEM-style replacement connector and terminals. Easy to use, made in the USA.

€2.31 €3.08

Ready-To-Install Handlebar Wire Extension Kit — 305 mm (12"), Pin, Black

-€8.86

NAMZ Ready-To-Install Handlebar Wire Extension Kit — 305 mm (12"),...

Complete extension wiring kit with pre-crimped Molex terminals, heat shrink, and color-matching wire to extend OEM H-D handlebar switch wiring. Made in the U.S.A.

€26.58 €35.44

-€38.91

DYNATEK-HARLEY Dual-Output Coil — 12V, Black

Reliable dual-output ignition coil engineered for aftermarket and OEM systems; made in the USA.

€151.32 €190.23

-€38.91

DYNATEK-HARLEY Miniature Series Coil — 12V, 3.0Ω, dual-plug

High-output miniature coil for Dyna 2000/3000 and dwell-control ignitions. Secondary resistance 11.5 ohms. Not for Twin Cam or Dyna "S"/DYNA III and earlier.

€151.32 €190.23

Dyna 2000TC Programmable Digital Performance Ignition Module — Black

-€64.08

DYNATEK-HARLEY Dyna 2000TC Programmable Digital Performance Ignition Module —...

Single-fire, fully programmable ignition with 16 advance curves, 8 rev limiter settings, PC programmability, coil-current monitoring and data logging; made in USA.

€249.24 €313.32

SH Series Sindered Rear Brake Pads — 9.9 mm thickness, 81.9 mm length

-€12.38

TRW SH Series Sindered Rear Brake Pads — 9.9 mm thickness, 81.9 mm...

Sintered metallic rear brake pads designed for reliable stopping and wide disc compatibility. Match friction to SV pad; confirm original equipment before use.

€26.52 €38.90

SH Series Sindered Rear Brake Pads — 91.5 × 58.1 × 7 mm, sintered metal

-€17.35

TRW SH Series Sindered Rear Brake Pads — 91.5 × 58.1 × 7 mm,...

Sintered rear brake pads for rear use only; matched friction to SV pad and compatible with most disc types.

€22.84 €40.19

SH Series Sindered Rear Brake Pads — 10.0 mm thickness, 85.7 mm length

-€18.21

TRW SH Series Sindered Rear Brake Pads — 10.0 mm thickness, 85.7...

Rear-brake pads engineered for reliable, consistent performance. Compatible with most disc types; use only on bikes originally fitted with sintered pads.

€23.95 €42.16

Round Floating Brake Rotor — 300 mm (11.8"), 5-hole, 82.55 mm bolt circle, 5.0 mm thickness

-€38.97

TRW Round Floating Brake Rotor — 300 mm (11.8"), 5-hole, 82.55 mm...

Two-piece floating brake rotor with precision-ground surface to reduce vibration and improve braking feel. Sold each; order two for dual-rotor setups.

€151.53 €190.50

WME Series Rear Shocks — HD035WME02V2, black

-€66.43

BITUBO S.R.L. WME Series Rear Shocks — HD035WME02V2, black

High-performance radial piston design with straight flow for fast response
Anti-block and anti-fading systems for reliable damping
50/30-click rebound and compression adjusters
Progressive spring with threaded preload; adjustable for solo or two-up riding

€383.90 €450.33

VCM Digital Tuning Licence — TECHNORESEARCH TR200020

-€122.50

TECHNORESEARCH VCM Digital Tuning Licence — TECHNORESEARCH TR200020

Single-motorcycle digital tuning license for use with Centurion Super Pro Plus and VCM-TR4 Dealer Pack. Licenses sold separately.

€187.50 €310.00

VCM-Tr4 Dealer Pack — Tuner Kit, Autotune, Black

-€235.88

TECHNORESEARCH VCM-Tr4 Dealer Pack — Tuner Kit, Autotune, Black

Dealer-grade VCM-Tr4 tuning and data-logging pack for Harley-Davidson Delphi EFI systems. Includes VCM-TR4, master key, cables, USB, and 2 digital licenses.

€801.00 €1,036.88

Torque™ Handlebar/Rail Mount Base with 1" Ball — fits 28.6/31.8/39 mm handlebars, Black

-€5.18

RAM MOUNTS Torque™ Handlebar/Rail Mount Base with 1" Ball — fits...

Low-profile mount base secures personal electronics and small accessories in high-vibration environments. Nylon-insert locknuts prevent loosening; sizing inserts protect rails and ensure a snug fit.

€20.16 €25.34

-€2.37

RAM MOUNTS Pin-Lock Security Knob — 1" fit for B-size arms, Black

Low-profile Pin-Lock security knob with 1/4"-20 female thread; replaces knobs on 1" B-size arms to prevent slippage.

€9.23 €11.60

-€3.08

RAM MOUNTS GoPro® Camera Adapter — 1" ball, GoPro compatible, Black

Patented rubber ball adapter that dampens shock and vibration and offers multiple articulation points for secure, adjustable GoPro® mounting. Camera not included.