Best sellers

$Live To Ride Custom Mirrors — 5/16\"-18, 76 mm (3\"), 15 cm (6\"), Chrome, Gold$

-€11.49

DRAG SPECIALTIES Live To Ride Custom Mirrors — 5/16\"-18, 76 mm (3\"), 15 cm...

Die-cast construction with embossed eagle
"Live to Ride" script detail
Durable, corrosion-resistant finish
Adjustable mirror angle for improved visibility

€32.45 €43.94

Chrome Steel Brake Line Fitting — -3 AN Male, 3/8-24 SAE Male, Chrome

-€1.55

DRAG SPECIALTIES Chrome Steel Brake Line Fitting — -3 AN Male, 3/8-24 SAE Male,...

Durable brake line fitting for secure, leak-resistant hydraulic connections. Made in the U.S.A.

€4.40 €5.95

-€2.20

DRAG SPECIALTIES Cargo Net — 38 cm (15") x 38 cm (15"), plastic hooks, black

Elastic cargo net with 2.5" x 2.5" mesh; secures loads quickly and stores compactly.

€6.23 €8.43

-€3.54

DRAG SPECIALTIES Turn Signal Standoff — Front mount, Chrome

Streamlines turn signal wiring and simplifies installation for aftermarket signals.

€10.01 €13.55

$Internal Fuel Line — 7.9 mm (5/16\"), 20.5 cm (8\"), Fuel-injected$

-€1.91

DRAG SPECIALTIES Internal Fuel Line — 7.9 mm (5/16\"), 20.5 cm (8\"),...

Internal line that routes fuel from the pump to the filter for reliable delivery.

€5.41 €7.32

Fuel Tank Crossover Line — 7.9 mm (5/16"), 26 cm (10-1/4"), Silver

-€8.24

DRAG SPECIALTIES Fuel Tank Crossover Line — 7.9 mm (5/16"), 26 cm (10-1/4"),...

Replaces stock rubber lower crossover lines with durable metal lines. Compression fittings provide a positive seal. Made in the USA.

€23.30 €31.54

Chrome 40 Spoke Custom Rim — 21x2.15, 40-hole, chrome, requires custom spokes

-€23.66

DRAG SPECIALTIES Chrome 40 Spoke Custom Rim — 21x2.15, 40-hole, chrome,...

Steel rim with rolled edge for added strength. Manufactured in Japan. Rim only.

€66.85 €90.51

-€17.39

DRAG SPECIALTIES Rear Belt Guard — Chrome

Simple bolt-on installation. Stamped construction protects the drive belt from debris and road spray.

€49.16 €66.55

Round Sissy Bar for Hardtail Models — 381 mm (15"), fits rigid frames with 10" axle plate spacing, Chrome

-€29.10

DRAG SPECIALTIES Round Sissy Bar for Hardtail Models — 381 mm (15"), fits rigid...

Chrome-plated round sissy bar for hardtail frames; fits axle plates approximately 10" apart.

€82.24 €111.34

-€4.32

DRAG SPECIALTIES Replacement OEM-Style Rubber Grips — 25.4 mm (1"), Black

Replacement OEM-Style Rubber Grips with throttle sleeve installed for dual or single-cable applications.

€12.23 €16.55

Extra Plate Clutch Kit — Steel drive plate, DuPont™ Kevlar® friction

-€34.48

BARNETT Extra Plate Clutch Kit — Steel drive plate, DuPont™ Kevlar®...

Six bonded friction plates, one metal drive plate and heavy-duty springs; increases contact area by ~20%; wet or dry use; Made in USA.

€134.13 €168.61

-€4.20

DRAG SPECIALTIES Acorn Nut Sets — 10-pack, Silver

Individual packs of acorn nuts. Made in the U.S.A.

€11.85 €16.05

-€7.71

DRAG SPECIALTIES Chrome Regulator Covers — Steel

Stamped cover fits over the existing regulator; includes mounting hardware.

€21.78 €29.49

-€17.47
Out of Stock

DRAG SPECIALTIES OEM Fuel Gauge — Black face, white readout

OEM-style fuel gauge with clear analog readout and simple installation.

€49.36 €66.83

-€33.43

DRAG SPECIALTIES Inner Fairing Cap Switch Kit — Black

Complete four-switch kit for inner fairing cap: spotlight/driving light, speaker, cruise control and accessory switch.

€94.48 €127.91

-€29.36

DRAG SPECIALTIES Ignition Coil — 12 V, 30,000 V, black

Improves starting and high-speed stability, increases peak spark voltage by at least 20%, and helps improve mileage.

€82.95 €112.31

Lucas-Style Taillight with Chrome Bracket — 12V, Chrome housing, Red lens, Fairing mount

-€12.20

EMGO Lucas-Style Taillight with Chrome Bracket — 12V, Chrome...

Retro Lucas-style taillight assembly with bracket. Adds custom character and a low-profile look. Universal fit; not DOT or ECE compliant.

€34.45 €46.65

$Peg Pins — 38 mm (1-1/2\"), Blue, Silver$

-€2.09

DRAG SPECIALTIES Peg Pins — 38 mm (1-1/2\"), Blue, Silver

Replacement peg pins with a bright zinc finish. Length given excludes the threads.

€5.91 €8.00

-€23.13

DRAG SPECIALTIES Passenger Foot Peg Mount Kits — Chrome, left and right mounts

Kits include left and right-side mounts with hardware. Accepts most male-mount footpegs.

€65.35 €88.48

-€4.23

DRAG SPECIALTIES Extended Shift Peg — 83 mm (3-1/4"), Black

Extended shift peg designed to absorb vibration; hollow-core neoprene insert cleats. Screws into shifter arm. Sold each.

€11.97 €16.20

Stainless Steel Brake Line Kit — 42 cm, 44 cm, Front/Lower/Upper, Silver clear-coated

-€34.76

DRAG SPECIALTIES Stainless Steel Brake Line Kit — 42 cm, 44 cm,...

Braided brake line kit with chrome steel fittings; made in the U.S.A.

€98.25 €133.01

-€72.88

DRAG SPECIALTIES Clutch Shell — Part 148141

High-quality replacement clutch shell with starter gear; includes center bearing and snap rings.

€205.97 €278.85

-€36.40
Out of Stock

DRAG SPECIALTIES High Performance Oil Pump — High volume, Steel

Improves oil pressure and volume, reduces oil carryover at high rpm, 53mm rotors, die-cast aluminum body with high-strength steel gears. Fits stock and aftermarket cam support plates; not compatible with Screaming Eagle cam plate.

€102.95 €139.35

-€3.20

DRAG SPECIALTIES Bezel Dipstick — Black

Restores a clean finish around the dipstick opening; includes replacement push nut for installation.

€9.06 €12.26

Custom Gas Tank — 11.4 L (3 US gal), tunnel 3", 20" L, 11" W, raw

-€49.54

DRAG SPECIALTIES Custom Gas Tank — 11.4 L (3 US gal), tunnel 3", 20" L, 11" W, raw

TIG-welded custom gas tank with chrome mounting hardware; deep tunnel and approximate 23" tab spacing; vented cap sold separately; must be sealed before use.

€140.00 €189.54

Tough-Claw™ Mount with Level Cup™ Drink Holder — Clamp 5/8"–1-1/2", fits 2-1/2"–3-1/2", Black

-€9.50

RAM MOUNTS Tough-Claw™ Mount with Level Cup™ Drink Holder — Clamp...

High-strength composite and stainless steel clamp mount with Level Cup™ self-leveling drink holder; clamps 5/8"–1-1/2", fits 2-1/2"–3-1/2".

€36.97 €46.47

Torque™ Handlebar/Rail Mount Base with 1" Ball — Fits 19 mm (3/4"), 22 mm (7/8"), 25.4 mm (1")

-€5.12

RAM MOUNTS Torque™ Handlebar/Rail Mount Base with 1" Ball — Fits 19 mm...

Low-profile handlebar and rail mount secures personal electronics and small accessories. Nylon-insert locknuts and sizing inserts prevent loosening and protect the rail.

€19.87 €24.99

Can Bus Handlebar Control Module — 48" harness, left mount, chrome

-€35.42

DRAG SPECIALTIES Can Bus Handlebar Control Module — 48" harness, left mount,...

IP66-rated handlebar control module with included switch and wire harness. Not for use with Softail models that feature cruise control.

€100.10 €135.52

-€6.13

DRAG SPECIALTIES OEM-Style Lever — Clutch, Hydraulic, Polished Silver

OEM-style control lever designed to fit stock hand controls for a direct replacement.

€17.32 €23.45

-€1.93

RAM MOUNTS Ball Adapter with AMPS Plate — 1" ball, AMPS 1.5" x 1.188", Black

1" B-size rubber ball on a 2" x 1.7" square base with four pre-drilled holes forming the 1.5" x 1.188" AMPS pattern.

€7.51 €9.44

shop by category

Home

Best sellers

Contact us

Products

Our company

shop by category

Home  

Best sellers

Home