Best sellers

Chrome Steel Brake Line Fitting — -3 AN Male, 3/8-24 SAE Male, Chrome

-€1.55

DRAG SPECIALTIES Chrome Steel Brake Line Fitting — -3 AN Male, 3/8-24 SAE Male,...

Durable brake line fitting for secure, leak-resistant hydraulic connections. Made in the U.S.A.

€4.40 €5.95

-€3.54

DRAG SPECIALTIES Turn Signal Standoff — Front mount, Chrome

Streamlines turn signal wiring and simplifies installation for aftermarket signals.

€10.01 €13.55

$Internal Fuel Line — 7.9 mm (5/16\"), 20.5 cm (8\"), Fuel-injected$

-€1.91

DRAG SPECIALTIES Internal Fuel Line — 7.9 mm (5/16\"), 20.5 cm (8\"),...

Internal line that routes fuel from the pump to the filter for reliable delivery.

€5.41 €7.32

Fuel Tank Crossover Line — 7.9 mm (5/16"), 26 cm (10-1/4"), Silver

-€8.24

DRAG SPECIALTIES Fuel Tank Crossover Line — 7.9 mm (5/16"), 26 cm (10-1/4"),...

Replaces stock rubber lower crossover lines with durable metal lines. Compression fittings provide a positive seal. Made in the USA.

€23.30 €31.54

Chrome 40 Spoke Custom Rim — 21x2.15, 40-hole, chrome, requires custom spokes

-€23.66

DRAG SPECIALTIES Chrome 40 Spoke Custom Rim — 21x2.15, 40-hole, chrome,...

Steel rim with rolled edge for added strength. Manufactured in Japan. Rim only.

€66.85 €90.51

-€17.39

DRAG SPECIALTIES Rear Belt Guard — Chrome

Simple bolt-on installation. Stamped construction protects the drive belt from debris and road spray.

€49.16 €66.55

Round Sissy Bar for Hardtail Models — 381 mm (15"), fits rigid frames with 10" axle plate spacing, Chrome

-€29.10

DRAG SPECIALTIES Round Sissy Bar for Hardtail Models — 381 mm (15"), fits rigid...

Chrome-plated round sissy bar for hardtail frames; fits axle plates approximately 10" apart.

€82.24 €111.34

-€4.32

DRAG SPECIALTIES Replacement OEM-Style Rubber Grips — 25.4 mm (1"), Black

Replacement OEM-Style Rubber Grips with throttle sleeve installed for dual or single-cable applications.

€12.23 €16.55

Extra Plate Clutch Kit — Steel drive plate, DuPont™ Kevlar® friction

-€34.48

BARNETT Extra Plate Clutch Kit — Steel drive plate, DuPont™ Kevlar®...

Six bonded friction plates, one metal drive plate and heavy-duty springs; increases contact area by ~20%; wet or dry use; Made in USA.

€134.13 €168.61

-€4.20

DRAG SPECIALTIES Acorn Nut Sets — 10-pack, Silver

Individual packs of acorn nuts. Made in the U.S.A.

€11.85 €16.05

$V-Twin Top End Gasket Kits — Fits '92–'99 EVO Big Twin, Bore 3.500\", Thickness 1.02 mm (0.040\")$

-€25.06

COMETIC V-Twin Top End Gasket Kits — Fits '92–'99 EVO Big Twin, Bore...

Complete EST top-end gasket kit with embossed stainless-steel MLS components; includes all gaskets, seals, and O‑rings needed to rebuild the top end. Made in USA.

€85.09 €110.15

-€7.71

DRAG SPECIALTIES Chrome Regulator Covers — Steel

Stamped cover fits over the existing regulator; includes mounting hardware.

€21.78 €29.49

-€17.47
Out of Stock

DRAG SPECIALTIES OEM Fuel Gauge — Black face, white readout

OEM-style fuel gauge with clear analog readout and simple installation.

€49.36 €66.83

-€33.43

DRAG SPECIALTIES Inner Fairing Cap Switch Kit — Black

Complete four-switch kit for inner fairing cap: spotlight/driving light, speaker, cruise control and accessory switch.

€94.48 €127.91

$Peg Pins — 38 mm (1-1/2\"), Blue, Silver$

-€2.09

DRAG SPECIALTIES Peg Pins — 38 mm (1-1/2\"), Blue, Silver

Replacement peg pins with a bright zinc finish. Length given excludes the threads.

€5.91 €8.00

-€23.13

DRAG SPECIALTIES Passenger Foot Peg Mount Kits — Chrome, left and right mounts

Kits include left and right-side mounts with hardware. Accepts most male-mount footpegs.

€65.35 €88.48

-€4.23

DRAG SPECIALTIES Extended Shift Peg — 83 mm (3-1/4"), Black

Extended shift peg designed to absorb vibration; hollow-core neoprene insert cleats. Screws into shifter arm. Sold each.

€11.97 €16.20

Stainless Steel Brake Line Kit — 42 cm, 44 cm, Front/Lower/Upper, Silver clear-coated

-€34.76

DRAG SPECIALTIES Stainless Steel Brake Line Kit — 42 cm, 44 cm,...

Braided brake line kit with chrome steel fittings; made in the U.S.A.

€98.25 €133.01

-€40.44

DRAG SPECIALTIES Oil Pump Assembly — Aluminum

High-quality replacement oil pump; gaskets and seals included. Mounting hardware sold separately.

€114.28 €154.72

-€36.40
Out of Stock

DRAG SPECIALTIES High Performance Oil Pump — High volume, Steel

Improves oil pressure and volume, reduces oil carryover at high rpm, 53mm rotors, die-cast aluminum body with high-strength steel gears. Fits stock and aftermarket cam support plates; not compatible with Screaming Eagle cam plate.

€102.95 €139.35

Custom Gas Tank — 11.4 L (3 US gal), tunnel 3", 20" L, 11" W, raw

-€49.54

DRAG SPECIALTIES Custom Gas Tank — 11.4 L (3 US gal), tunnel 3", 20" L, 11" W, raw

TIG-welded custom gas tank with chrome mounting hardware; deep tunnel and approximate 23" tab spacing; vented cap sold separately; must be sealed before use.

€140.00 €189.54

Tough-Claw™ Mount with Level Cup™ Drink Holder — Clamp 5/8"–1-1/2", fits 2-1/2"–3-1/2", Black

-€9.50

RAM MOUNTS Tough-Claw™ Mount with Level Cup™ Drink Holder — Clamp...

High-strength composite and stainless steel clamp mount with Level Cup™ self-leveling drink holder; clamps 5/8"–1-1/2", fits 2-1/2"–3-1/2".

€36.97 €46.47

Torque™ Handlebar/Rail Mount Base with 1" Ball — Fits 19 mm (3/4"), 22 mm (7/8"), 25.4 mm (1")

-€5.12

RAM MOUNTS Torque™ Handlebar/Rail Mount Base with 1" Ball — Fits 19 mm...

Low-profile handlebar and rail mount secures personal electronics and small accessories. Nylon-insert locknuts and sizing inserts prevent loosening and protect the rail.

€19.87 €24.99

-€6.13

DRAG SPECIALTIES OEM-Style Lever — Clutch, Hydraulic, Polished Silver

OEM-style control lever designed to fit stock hand controls for a direct replacement.

€17.32 €23.45

-€1.93

RAM MOUNTS Ball Adapter with AMPS Plate — 1" ball, AMPS 1.5" x 1.188", Black

1" B-size rubber ball on a 2" x 1.7" square base with four pre-drilled holes forming the 1.5" x 1.188" AMPS pattern.

€7.51 €9.44

-€2.25

RAM MOUNTS Mount Adapter — Black, Ball

Marine-grade construction and corrosion-resistant finish
1" rubber ball
Predrilled base holes for multiple mount options

€8.76 €11.01

$Double Socket Arm with Swivel — 25.4 mm (1\") handlebar, Black$

-€5.65

RAM MOUNTS Double Socket Arm with Swivel — 25.4 mm (1\") handlebar, Black

High-strength composite double 1" ball-socket arm with 360° center rotation and 180° swivel; rubber ball ends and central pivot for exceptional adjustability. 5" overall length.

€21.94 €27.59

-€67.98

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" diameter, 30" width, black gloss

Comfort-oriented T-bar handlebar. Optional gauge mounts sold separately. Made in the U.S.A. Not for use with stock risers on 883C/1200C models. Compatible with hydraulic clutch controls.

€192.14 €260.12

Wheel Spacer — 25.4 mm axle, 24.9 mm length, 38.1 mm outside diameter

-€3.67

DRAG SPECIALTIES Wheel Spacer — 25.4 mm axle, 24.9 mm length, 38.1 mm outside...

OEM replacement wheel spacer with a polished finish for reliable, accurate wheel mounting.

€10.38 €14.05

shop by category

Home

Best sellers

Contact us

Products

Our company

shop by category

Home  

Best sellers

Home