Best sellers

$Live To Ride Custom Mirrors — 5/16\"-18, 76 mm (3\"), 15 cm (6\"), Chrome, Gold$

-€11.49

DRAG SPECIALTIES Live To Ride Custom Mirrors — 5/16\"-18, 76 mm (3\"), 15 cm...

Die-cast construction with embossed eagle
"Live to Ride" script detail
Durable, corrosion-resistant finish
Adjustable mirror angle for improved visibility

€32.45 €43.94

Chrome Steel Brake Line Fitting — -3 AN Male, 3/8-24 SAE Male, Chrome

-€1.55

DRAG SPECIALTIES Chrome Steel Brake Line Fitting — -3 AN Male, 3/8-24 SAE Male,...

Durable brake line fitting for secure, leak-resistant hydraulic connections. Made in the U.S.A.

€4.40 €5.95

-€2.20

DRAG SPECIALTIES Cargo Net — 38 cm (15") x 38 cm (15"), plastic hooks, black

Elastic cargo net with 2.5" x 2.5" mesh; secures loads quickly and stores compactly.

€6.23 €8.43

-€3.54

DRAG SPECIALTIES Turn Signal Standoff — Front mount, Chrome

Streamlines turn signal wiring and simplifies installation for aftermarket signals.

€10.01 €13.55

$Internal Fuel Line — 7.9 mm (5/16\"), 20.5 cm (8\"), Fuel-injected$

-€1.91

DRAG SPECIALTIES Internal Fuel Line — 7.9 mm (5/16\"), 20.5 cm (8\"),...

Internal line that routes fuel from the pump to the filter for reliable delivery.

€5.41 €7.32

Fuel Tank Crossover Line — 7.9 mm (5/16"), 26 cm (10-1/4"), Silver

-€8.24

DRAG SPECIALTIES Fuel Tank Crossover Line — 7.9 mm (5/16"), 26 cm (10-1/4"),...

Replaces stock rubber lower crossover lines with durable metal lines. Compression fittings provide a positive seal. Made in the USA.

€23.30 €31.54

Chrome 40 Spoke Custom Rim — 21x2.15, 40-hole, chrome, requires custom spokes

-€23.66

DRAG SPECIALTIES Chrome 40 Spoke Custom Rim — 21x2.15, 40-hole, chrome,...

Steel rim with rolled edge for added strength. Manufactured in Japan. Rim only.

€66.85 €90.51

-€17.39

DRAG SPECIALTIES Rear Belt Guard — Chrome

Simple bolt-on installation. Stamped construction protects the drive belt from debris and road spray.

€49.16 €66.55

Round Sissy Bar for Hardtail Models — 381 mm (15"), fits rigid frames with 10" axle plate spacing, Chrome

-€29.10

DRAG SPECIALTIES Round Sissy Bar for Hardtail Models — 381 mm (15"), fits rigid...

Chrome-plated round sissy bar for hardtail frames; fits axle plates approximately 10" apart.

€82.24 €111.34

-€4.32

DRAG SPECIALTIES Replacement OEM-Style Rubber Grips — 25.4 mm (1"), Black

Replacement OEM-Style Rubber Grips with throttle sleeve installed for dual or single-cable applications.

€12.23 €16.55

Extra Plate Clutch Kit — Steel drive plate, DuPont™ Kevlar® friction

-€34.48

BARNETT Extra Plate Clutch Kit — Steel drive plate, DuPont™ Kevlar®...

Six bonded friction plates, one metal drive plate and heavy-duty springs; increases contact area by ~20%; wet or dry use; Made in USA.

€134.13 €168.61

Replacement 3-4 Shift Clutch — 3rd gear, 4th gear

-€23.57

ANDREWS Replacement 3-4 Shift Clutch — 3rd gear, 4th gear

Face milled with longer lead-in ramps for more positive shifts; replacement 3-4 shift clutch.

€66.63 €90.20

Replacement Stock 3rd Main Gear — 1.23:1

-€21.14

ANDREWS Replacement Stock 3rd Main Gear — 1.23:1

Replacement 24-tooth short 3rd main gear required for original style 1st gear installation.

€82.17 €103.31

Replacement Stock 2nd Gear — 1.82:1 ratio, 21 teeth, Silver

-€16.40

ANDREWS Replacement Stock 2nd Gear — 1.82:1 ratio, 21 teeth, Silver

Replacement stock second gear with lead-in ramps for more positive 1-2 shifts. Made in USA.

€63.77 €80.17

Replacement Stock Main Drive 4th Gear — 26T

-€42.08

ANDREWS Replacement Stock Main Drive 4th Gear — 26T

Replacement fourth gear with wider drive slots and steeper lead-in ramps for improved 3-4 shifting.

Includes an updated O-ring groove design for chain drive fourth gears.

€163.64 €205.72

-€4.78

ANDREWS Shifter Fork — 4-speed, countershaft

One-piece cold-forged fork. Fully heat treated and black oxide coated. Made in the U.S.A.

€18.59 €23.37

-€6.09

ANDREWS Shifter Fork — Mainshaft, 4-speed

One-piece cold-forged fork; fully heat treated and black oxide coated; made in the U.S.A.

€23.72 €29.81

-€4.20

DRAG SPECIALTIES Acorn Nut Sets — 10-pack, Silver

Individual packs of acorn nuts. Made in the U.S.A.

€11.85 €16.05

$V-Twin Top End Gasket Kits — Fits '92–'99 EVO Big Twin, Bore 3.500\", Thickness 1.02 mm (0.040\")$

-€25.06

COMETIC V-Twin Top End Gasket Kits — Fits '92–'99 EVO Big Twin, Bore...

Complete EST top-end gasket kit with embossed stainless-steel MLS components; includes all gaskets, seals, and O‑rings needed to rebuild the top end. Made in USA.

€85.09 €110.15

-€7.71

DRAG SPECIALTIES Chrome Regulator Covers — Steel

Stamped cover fits over the existing regulator; includes mounting hardware.

€21.78 €29.49

-€17.47
Out of Stock

DRAG SPECIALTIES OEM Fuel Gauge — Black face, white readout

OEM-style fuel gauge with clear analog readout and simple installation.

€49.36 €66.83

-€33.43

DRAG SPECIALTIES Inner Fairing Cap Switch Kit — Black

Complete four-switch kit for inner fairing cap: spotlight/driving light, speaker, cruise control and accessory switch.

€94.48 €127.91

-€29.36

DRAG SPECIALTIES Ignition Coil — 12 V, 30,000 V, black

Improves starting and high-speed stability, increases peak spark voltage by at least 20%, and helps improve mileage.

€82.95 €112.31

$Peg Pins — 38 mm (1-1/2\"), Blue, Silver$

-€2.09

DRAG SPECIALTIES Peg Pins — 38 mm (1-1/2\"), Blue, Silver

Replacement peg pins with a bright zinc finish. Length given excludes the threads.

€5.91 €8.00

-€23.13

DRAG SPECIALTIES Passenger Foot Peg Mount Kits — Chrome, left and right mounts

Kits include left and right-side mounts with hardware. Accepts most male-mount footpegs.

€65.35 €88.48

-€4.23

DRAG SPECIALTIES Extended Shift Peg — 83 mm (3-1/4"), Black

Extended shift peg designed to absorb vibration; hollow-core neoprene insert cleats. Screws into shifter arm. Sold each.

€11.97 €16.20

Stainless Steel Brake Line Kit — 42 cm, 44 cm, Front/Lower/Upper, Silver clear-coated

-€34.76

DRAG SPECIALTIES Stainless Steel Brake Line Kit — 42 cm, 44 cm,...

Braided brake line kit with chrome steel fittings; made in the U.S.A.

€98.25 €133.01

-€43.51

ANDREWS Belt Drive Transmission Pulley — ANDREWS, 34 tooth

Machined from heat-treated, gear-quality steel. Made in the U.S.A. May require swingarm axle-hole elongation or belt length change for proper adjustment.

€169.17 €212.68

-€72.88

DRAG SPECIALTIES Clutch Shell — Part 148141

High-quality replacement clutch shell with starter gear; includes center bearing and snap rings.

€205.97 €278.85

-€36.40
Out of Stock

DRAG SPECIALTIES High Performance Oil Pump — High volume, Steel

Improves oil pressure and volume, reduces oil carryover at high rpm, 53mm rotors, die-cast aluminum body with high-strength steel gears. Fits stock and aftermarket cam support plates; not compatible with Screaming Eagle cam plate.

€102.95 €139.35

shop by category

Home

Best sellers

Contact us

Products

Our company

shop by category

Home  

Best sellers

Home