Handlebars & Controls

-€47.69

PRO-ONE PERF.MFG. Pro-Blade Billet Lever — Chrome, Harley-Davidson

Top-quality levers with serious attitude, engineered for smooth control and a refined appearance.

€134.77 €182.46

-€74.80

TODD'S CYCLE 1" Strip Handlebar — 1" clamp, 29.5" width, 12" rise, black gloss

Classic "Stripper" handlebar with polished welds, internal wiring slots, and a smooth, unknurled grip.

€290.90 €365.70

Handlebar Clamp For Harley Sportster — Riser mount, Black

-€5.17

CULT WERK Handlebar Clamp For Harley Sportster — Riser mount, Black

Fits 1 inch handlebars on most Harley-Davidson Sportster models. Includes 4 screw covers and a black powder-coated finish.

€29.83 €35.00

Handlebar Clamp Screw — CULT WERK, HD-SPO110, Black, Steel, Kit

-€2.58

CULT WERK Handlebar Clamp Screw — CULT WERK, HD-SPO110, Black, Steel, Kit

Replacement handlebar clamp screws for Harley-Davidson Sportster ® models up to the current year of construction. Durable, non-flaking finish and direct fit.

€14.84 €17.42

1" Classic Bagger Ape Handlebar — 25.4 mm clamp, 25.5 cm rise, 89 cm width, Chrome

-€35.91

PAUL YAFFE BAGGER NATION 1" Classic Bagger Ape Handlebar — 25.4 mm clamp, 25.5 cm rise,...

Classic 1" bagger ape handlebar with internal wiring prep, throttle-by-wire notch, and knurled center for secure control placement.

€139.45 €175.36

1" Classic Bagger Ape Handlebar — 25.4 mm clamp, 25.5 cm rise, 89 cm width

-€50.08

PAUL YAFFE BAGGER NATION 1" Classic Bagger Ape Handlebar — 25.4 mm clamp, 25.5 cm rise,...

Mandrel-bent 1" seamless tubing; notched for electronic throttle; knurled, dimpled and pre-drilled for internal wiring. Made in the United States; recommended for bagger fitment.

€141.69 €191.77

1" Classic Bagger Ape Handlebar — 25.4 mm clamp, 30.5 cm rise, 89 cm width, Black

-€50.08

PAUL YAFFE BAGGER NATION 1" Classic Bagger Ape Handlebar — 25.4 mm clamp, 30.5 cm rise,...

Mandrel-bent bagger ape handlebar with notches for throttle-by-wire and pre-drilled center for internal wiring.

€141.69 €191.77

-€5.09

PAUL YAFFE BAGGER NATION Handlebar Riser Spacers — 25.4 mm (1") clamp, Chrome

Adapts Paul Yaffe Bagger and Sport Monkey Bars for fitment on newer FLHR models. Made in the USA. Bars with 14"+ end rise may require cable or wiring extensions.

€19.86 €24.95

-€0.77

DAYTONA Grip Spacer — 50 mm OD, 22/26 mm ID, 5 mm thick, Black

Thin spacer for handlebar grips — 50 mm OD, 22/26 mm ID, 5 mm thick.

€2.17 €2.94

Handlebar End — 14-19 mm, black anodized

-€8.77

DAYTONA Handlebar End — 14-19 mm, black anodized

W-style handlebar end weights with a dual-function design for vibration damping and mirror mounting. Supplied as a kit for easy installation on compatible bars.

€24.80 €33.57

$1-1/4\" Strip Handlebar — 32 mm (1-1/4\") diameter, 35.5 cm (14\") rise$

-€87.08

TODD'S CYCLE 1-1/4\" Strip Handlebar — 32 mm (1-1/4\") diameter, 35.5 cm...

Strip-style handlebar with polished welds, slotted for internal or external wiring, compatible with hydraulic clutches and heated grips. Made in the U.S.A.

€338.66 €425.74

1-1/4" Strip Handlebar — 32 mm (1-1/4"), 32" width, 14" rise, Black Gloss

-€87.08

TODD'S CYCLE 1-1/4" Strip Handlebar — 32 mm (1-1/4"), 32" width, 14" rise,...

Strip handlebar with slotted wiring, polished welds, hydraulic clutch compatibility, and a clean line of sight to stock mirrors. Made in the U.S.A.

€338.66 €425.74

1-1/4" Bagger Ape Hanger Handlebar — 32 mm (1-1/4"), 25.4 mm (1") clamp, 25.5 cm (10") rise, Chrome

-€87.08

TODD'S CYCLE 1-1/4" Bagger Ape Hanger Handlebar — 32 mm (1-1/4"), 25.4 mm...

Notched for throttle-by-wire with large laser-cut wiring slots; fits factory heated grips and stock controls. Made in the U.S.A.

€338.66 €425.74

1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" dia, 1" clamp, 13" rise, 36-1/2" width

-€87.08

TODD'S CYCLE 1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" dia, 1" clamp, 13"...

Designed for use with the batwing fairing. Notched for throttle-by-wire. Large laser-cut, burr-free wiring slots. Compatible with factory heated grips and stock controls. Made in the U.S.A.

€338.66 €425.74

Master Cylinder Cover — fits Harley‑Davidson Breakout 2013–, Softail 2018–, black

-€12.18

CULT WERK Master Cylinder Cover — fits Harley‑Davidson Breakout 2013–,...

Precision CNC-milled master cylinder cover for Harley‑Davidson Breakout (2013–) and Softail (2018–). Direct replacement with interior machined to match original seal guides.

€70.32 €82.50

Brake and Clutch Cylinder Cover — Harley-Davidson Touring 2016–2020, Black

-€26.47

CULT WERK Brake and Clutch Cylinder Cover — Harley-Davidson Touring...

Precision machined replacement covers for Harley-Davidson Touring models 2016–2020. Easy two-screw installation; interior geometry matches the original for seal compatibility.

€152.70 €179.17

Brake and Clutch Cylinder Cover Racing — fits V-Rod, Night Rod, Night Rod Special 2007–2017, Black

-€26.47

CULT WERK Brake and Clutch Cylinder Cover Racing — fits V-Rod, Night...

Precision-milled replacement covers for the clutch and brake cylinders on Harley-Davidson V-Rod, Night Rod and Night Rod Special (2007–2017). Easy to install; original seal retained. Approximately 25mm higher than stock.

€152.70 €179.17

1-1/4" Strip Handlebar — 1-1/4" diameter, 35" width, 17" rise, Chrome

-€87.08

TODD'S CYCLE 1-1/4" Strip Handlebar — 1-1/4" diameter, 35" width, 17" rise,...

Strip handlebar with polished welds, slotted for internal or external wiring, compatible with hydraulic clutch and heated grips.

€338.66 €425.74

1-1/4" Strip Handlebar — 32 mm (1-1/4") diameter, 81.5 cm (32") width, 30.5 cm (12") rise, chrome

-€87.08

TODD'S CYCLE 1-1/4" Strip Handlebar — 32 mm (1-1/4") diameter, 81.5 cm...

Polished welds for a finished look
Slotted for internal or external wiring
Compatible with hydraulic clutch and heated grips
Pre-drilled and notched for throttle-by-wire
Maintains clear line of sight to stock mirrors
Made in the U.S.A.

€338.66 €425.74

$1-1/4\" Strip Handlebar — 32 mm (1-1/4\"), Rise 43 cm (17\"), Width 89 cm (35\")$

-€87.08

TODD'S CYCLE 1-1/4\" Strip Handlebar — 32 mm (1-1/4\"), Rise 43 cm (17\"),...

Strip-style handlebar slotted for internal or external wiring, compatible with hydraulic clutch and heated grips. Polished welds and a clean line of sight to stock mirrors. Made in the U.S.A.

€338.66 €425.74

1-1/4" Strip Handlebar — 32 mm (1-1/4"), 25.4 mm (1"), 75 cm (29-1/2"), Chrome

-€89.25

TODD'S CYCLE 1-1/4" Strip Handlebar — 32 mm (1-1/4"), 25.4 mm (1"), 75 cm...

Strip-style handlebar with polished welds, slotted for internal or external wiring, and compatible with heated grips and hydraulic clutches.

€347.13 €436.38

1-1/4" Strip Handlebar — 1-1/4" clamping diameter, 35-1/2" width, 17" rise, Chrome

-€89.25

TODD'S CYCLE 1-1/4" Strip Handlebar — 1-1/4" clamping diameter, 35-1/2"...

Polished welds, slotted for internal or external wiring, compatible with hydraulic clutch and heated grips. Made in the U.S.A.

€347.13 €436.38

1-1/4" Strip Handlebar — 1-1/4" clamp, 35-1/2" width, 17" rise, Black gloss

-€87.08

TODD'S CYCLE 1-1/4" Strip Handlebar — 1-1/4" clamp, 35-1/2" width, 17"...

Strip handlebar with polished welds and a pre-drilled, smooth design for easy wiring.

Works with hydraulic clutches and heated grips; offers an uncluttered view to stock mirrors and is made in the U.S.A.

€338.66 €425.74

-€87.08

TODD'S CYCLE 1-1/4" Strip Handlebar — 32 mm (1-1/4"), 32" (81.5 cm)

Polished welds; slotted for internal or external wiring; compatible with hydraulic clutch; works with heated grips; keeps stock mirror sightline clear; made in the U.S.A.

€338.66 €425.74

1-1/4" Strip Handlebar — 32 mm (1-1/4"), 78.5 cm (31"), 25.5 cm (10")

-€87.08

TODD'S CYCLE 1-1/4" Strip Handlebar — 32 mm (1-1/4"), 78.5 cm (31"), 25.5...

Strip handlebar with polished welds, slotted wiring options, hydraulic clutch compatibility, and support for heated grips.

€338.66 €425.74

-€82.93

TODD'S CYCLE 1-1/4" Strip Handlebar — 1-1/4" clamp, 31" width, 10" rise, black

Polished welds; slotted for internal or external wiring; compatible with hydraulic clutch; accepts heated grips; clear mirror sightline; made in the U.S.A.

€322.51 €405.44

1-1/4" Bagger Monkey Bar Handlebar — 1-1/4" diameter, 35" width, 14" rise, Black

-€205.91

PAUL YAFFE BAGGER NATION 1-1/4" Bagger Monkey Bar Handlebar — 1-1/4" diameter, 35"...

Hand-crafted to fit touring models. Bars are pre-drilled for easy internal wiring. Works well with Paul Yaffe's Bagger Nation "Super Clamp" one-piece riser clamp.

€429.91 €635.82

1-1/4" Bagger Monkey Bar Handlebar — 1-1/4" dia, 1" clamp, 36" width, Black

-€130.05

PAUL YAFFE BAGGER NATION 1-1/4" Bagger Monkey Bar Handlebar — 1-1/4" dia, 1" clamp, 36"...

Hand-crafted bagger monkey bar handlebar for touring models; pre-drilled for internal wiring; works with one-piece riser clamps for a clean installation.

€505.77 €635.82

Hand Grips — 25.4 mm (1") fit, black powder-coated

-€14.65

CULT WERK Hand Grips — 25.4 mm (1") fit, black powder-coated

Precision-machined handlebar grips for many Harley-Davidson models with electronic throttle. Comfortable, durable, and easy to install.

€84.52 €99.17

Hand Grips — 25.4 mm (1") handlebar fit, black, powder-coated

-€24.00

CULT WERK Hand Grips — 25.4 mm (1") handlebar fit, black, powder-coated

Precision-machined hand grips for Harley-Davidson motorcycles; durable protective finish and ergonomic design for improved control.

€138.50 €162.50

shop by category

Handlebars & Controls

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls