Handlebars & Controls

Handlebar Wire Harness Extension — 14" (35.5 cm), Harley Davidson®, Black

-€12.44

FAT BAGGERS INC. Handlebar Wire Harness Extension — 14" (35.5 cm), Harley...

14" (35.5 cm) wire extension for taller handlebars.

Enables installation up to 18" and lengthens OEM switches and throttle-by-wire sensor.

€35.18 €47.62

$Flamed Grips — 25.4 mm (1\"), Black, Chrome$

-€34.08

DRAG SPECIALTIES Flamed Grips — 25.4 mm (1\"), Black, Chrome

Sculpted flame-accent grips with a comfortable textured surface and sealed ends for a clean custom look.

€96.32 €130.40

-€12.20

DRAG SPECIALTIES Wide Blade Lever Set — Chrome, Brake, Clutch

Late-style wide, flat blade design; responsive feel; compatible with OEM lever perches.

€34.48 €46.68

Buffalo Handlebar Clamp — 1" clamping, 3-1/2" on-center risers, Black gloss

-€26.97

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" clamping, 3-1/2" on-center...

Billet aluminum clamp that covers the entire clamping area of 1-1/4" bars sized down to 1"; fits 3-1/2" on-center risers.

€76.23 €103.20

-€1.34
Out of Stock

DRAG SPECIALTIES Polyurethane Handlebar Riser Bushing — 4 Pack, Black Matte

Restores precise steering by replacing worn bushings.

28% stiffer for better control while retaining vibration damping.

€3.81 €5.15

-€33.30

LA CHOPPERS Handlebar Clamp Set — 1" clamping diameter

Precision handlebar clamp set that fits under the stock cover and includes all installation hardware and set screws.

€129.51 €162.81

-€33.30

LA CHOPPERS Handlebar Clamp Set — 32 mm (1-1/4"), raw finish

Fits under the stock cover
Includes installation hardware
Tapped for 1/2"-13 riser bolts
Set screws included
Top clamp locks handlebars

€129.51 €162.81

Custom Rubber Grips — 1 in (25.4 mm) handlebar diameter, Black, Chrome

-€14.59

DRAG SPECIALTIES Custom Rubber Grips — 1 in (25.4 mm) handlebar diameter,...

Durable rubber grips with die-cast core and left-side setscrew attachment for a secure, comfortable ride.

€41.23 €55.82

-€19.69

DRAG SPECIALTIES Buffalo Handlebar Clamp — 25.4 mm (1"), Black

Billet aluminum clamp that strengthens risers and improves handlebar control. For use with 3-1/2" on-center risers with offset holes.

€55.61 €75.30

-€45.03

DRAG SPECIALTIES 1" Handlebar — 25.4 mm clamp, 32" width, 18" rise

Seamless steel tubing for strength and a wide range of bends for a custom fit. Made in the U.S.A.

€127.25 €172.28

-€6.24

DRAG SPECIALTIES Handlebar Clamp — 25.4 mm (1") clamping, Chrome

Die-cast clamp for most '74-'17 models with 3-1/2" on-center risers; fits 1" OD handlebars.

€17.65 €23.89

-€10.31

DRAG SPECIALTIES Skull Lever Set — Brake, Clutch, Chrome

Lightweight levers with skull-end detailing; fits OEM-style controls and serviceable for brake and clutch use.

€29.14 €39.45

$Handlebar Clamp Set — 38 mm (1-1/2\") clamping diameter, raw finish$

-€37.96

LA CHOPPERS Handlebar Clamp Set — 38 mm (1-1/2\") clamping diameter, raw...

Precision CNC-machined clamp set that fits under the stock cover; includes installation hardware and set screws. Top clamp locks handlebars in place.

€147.61 €185.57

-€36.97

ACCUTRONIX Knurled Notched Custom Grips — 25.4 mm (1"), Chrome

High-quality construction
Machined from 6061-T6 billet aluminum
Made in the USA

€143.70 €180.67

Handlebar Control Kit — 25.4 mm clamp, 12.7 mm bore, Chrome

-€64.51
Out of Stock

DRAG SPECIALTIES Handlebar Control Kit — 25.4 mm clamp, 12.7 mm bore, Chrome

Complete handlebar control kit; accepts OEM switches or equivalents; replacement parts available separately.

€250.88 €315.39

Replacement Part for Hydraulic Clutch — Chrome master cylinder cover, front mounting

-€5.01

DRAG SPECIALTIES Replacement Part for Hydraulic Clutch — Chrome master cylinder...

Replacement part for hydraulic clutch systems. Fits compatible handlebar control kits. Easy installation.

€14.14 €19.15

Kickback Handlebar Risers — 4 in rise, 1-1/2 in pullback, 1 in clamp

-€38.21
Out of Stock

BARON Kickback Handlebar Risers — 4 in rise, 1-1/2 in pullback, 1 in...

A premium pullback riser that provides immediate reach relief and reduces shoulder, neck and back pain. Includes stylish chrome caps and hardware. Works with most stock lines and cables. Easy to install.

€148.58 €186.79

-€18.94

DRAG SPECIALTIES Wide Blade Lever Set — Brake and Clutch, Chrome

Late-style wide, flat lever design; lightweight construction; fits OEM lever perches.

€53.51 €72.45

-€19.71
Out of Stock

PAUGHCO T-Bar Handlebar Clamp Mount Kit — Chrome

Bracket assembly for T-Bar handlebar setups; fits 3-1/2" bolt centers and 4-3/4" hole centers. Made in the USA.

€76.68 €96.39

-€39.02
Out of Stock

DRAG SPECIALTIES Handlebar Riser & Top Clamp Kit — 1" clamp, 1-1/2" rise, Black

Includes two risers, a one-piece top clamp and all required hardware for easy installation.

€117.03 €156.05

-€68.99

BURLY BRAND 1-1/4" Handlebar — 1" clamp, 20" rise

Tapered hand control area accepts OEM or aftermarket controls. Dimpled 1" clamp area drilled for internal wiring.

€267.89 €336.88

-€10.56
Out of Stock

DRAG SPECIALTIES Wide Blade Replacement Clutch Lever — Chrome

Replacement clutch lever compatible with OEM lever perches for easy installation and reliable operation.

€29.84 €40.40

-€59.12

BURLY BRAND 1-1/4" Handlebar — 32 mm (1-1/4"), 90 cm (35-1/2"), 25.4 mm clamp

Tapered hand-control area allows use of OEM or aftermarket controls; 1" clamping area dimpled and drilled for internal wiring; may require extended cables.

€229.89 €289.01

$Grips — 25.4 mm (1\"), Chrome$

-€43.03

TODD'S CYCLE Grips — 25.4 mm (1\"), Chrome

Unique, top-end custom designs. Brass one-piece construction. Fits 1" handlebars. Made in the USA.

€167.33 €210.36

-€10.27

DRAG SPECIALTIES Wide Blade Replacement Brake Lever — Chrome

Precision replacement lever compatible with OEM lever perches; lightweight construction for easy operation.

€29.01 €39.28

1-1/2" Big Buffalo Riser Top Clamp — 1-1/2" clamping diameter, Chrome

-€27.34

DRAG SPECIALTIES 1-1/2" Big Buffalo Riser Top Clamp — 1-1/2" clamping diameter,...

Optional one-piece top clamp for Big Buffalo risers; polished end caps; risers thread 1/2"-13; made in the U.S.A.

€77.26 €104.60

Buffalo Billet Aluminum Handlebar Risers — 1" clamp, 1-1/2" rise, Black gloss

-€21.64

DRAG SPECIALTIES Buffalo Billet Aluminum Handlebar Risers — 1" clamp, 1-1/2"...

Billet aluminum handlebar risers offering a classic look and reliable clamping; accept Buffalo or OEM-style clamps. Made in the USA.

€64.91 €86.55

Hefty 1-1/4" Handlebar — 1-1/4" clamp, 34" width, chrome

-€47.44

LA CHOPPERS Hefty 1-1/4" Handlebar — 1-1/4" clamp, 34" width, chrome

Dimpled, pre-drilled Hefty handlebar with oversized clamp area; special risers sold separately. Made in the USA. Accepts H-D OEM heated grips.

€184.48 €231.92

Top Handlebar Clamp for 1-1/4" Handlebars — 1-1/4" (32 mm), Chrome

-€19.51

LA CHOPPERS Top Handlebar Clamp for 1-1/4" Handlebars — 1-1/4" (32 mm),...

Pair of top handlebar clamps for 1-1/4" handlebars with a polished chrome finish. Made in the USA.

€75.89 €95.40

Buffalo Billet Aluminum Handlebar Risers — 1" clamping, 3" rise, black gloss

-€34.07

DRAG SPECIALTIES Buffalo Billet Aluminum Handlebar Risers — 1" clamping, 3"...

Billet aluminum risers that fit 1" clamping diameter handlebars; 3" rise, accepts Buffalo or OEM-style clamps, gloss black finish.

€96.28 €130.35

shop by category

Handlebars & Controls

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls