Handlebars & Controls (4)

-€54.13

THRASHIN SUPPLY CO. 1" Handlebar — 30" width, 1" clamp

Mid-bend handlebar pre-drilled for internal wiring with a knurled clamp area for superior grip.

€152.98 €207.11

1" Handlebar — 30" width, 4" rise, 25° sweep, black

-€47.76

THRASHIN SUPPLY CO. 1" Handlebar — 30" width, 4" rise, 25° sweep, black

Knurled center, pre-drilled for internal wiring, and TBW-compatible keyholes for straightforward installation.

€134.98 €182.74

-€44.28

THRASHIN SUPPLY CO. 1" Handlebar — 25.4 mm clamp, 30" width, 5-1/2" rise, Chrome

Laser-etched Thrashin® logo; drilled and slotted for internal wiring; Throttle-By-Wire keyholes; knurled center; made in U.S.A.

€125.15 €169.43

1" Handlebar — 1" diameter, 30" width, 5-1/2" rise, 20° sweep, Black

-€47.76

THRASHIN SUPPLY CO. 1" Handlebar — 1" diameter, 30" width, 5-1/2" rise, 20° sweep,...

Laser-etched Thrashin® logo; drilled and slotted for internal wiring; TBW keyholes for late-style fitments (TBW plug required for cable throttles); knurled center for maximum clamp grip; made in U.S.A.

€134.98 €182.74

-€8.60

SW-MOTECH Brake Cylinder Guard — Rear, Black

Folded, laser-cut protector that prevents boot contact with the foot brake cylinder; includes mounting hardware and instructions.

€33.42 €42.02

-€7.74

SW-MOTECH Brake Reservoir Guard — Black, Rear

Compact guard protects the original brake reservoir from rock chips and prevents unwanted cover removal; includes mounting hardware and instructions.

€30.08 €37.82

-€8.60

SW-MOTECH Heel Guard — Black, left-side mounting

Protects boots from exhaust heat, chain contact, and swing arm movement; easy bolt-on installation with included hardware and instructions.

€33.42 €42.02

-€33.72

TODD'S CYCLE 1" Moto Bar Handlebar — 30", 1" clamp, 3-1/2" rise, Black

Motocross-style low-profile bar with slotted internal wiring and unknurled finish. Made in the USA.

€131.14 €164.86

-€33.72

TODD'S CYCLE 1" Moto Bar Handlebar — 1" clamping, 30" width, 3-1/2" rise

Motocross-style low-profile handlebar with slotted internal wiring, smooth grip area, made in the USA.

€131.14 €164.86

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width

Classic, narrow beater bar with subtle pullback and ready for internal wiring.

€137.69 €173.10

1" Beater Bar Handlebar — 70.5 cm width, 25.4 mm clamp, 25.5 cm rise

-€40.58

TODD'S CYCLE 1" Beater Bar Handlebar — 70.5 cm width, 25.4 mm clamp, 25.5...

Classic straight, narrow beater handlebar with an internal wiring slot and no knurling. Made in the U.S.A.

€157.78 €198.36

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 27-3/4" width, 10" rise, Gloss Black

Classic beater-style handlebar with a straight, narrow profile and subtle pullback. Slotted for internal wiring, no knurling, made in the U.S.A.

€137.69 €173.10

1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise, Black

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise,...

Classic, simple beater bar with a straight, narrow style and subtle pullback; slotted for internal wiring and no knurling. Made in the USA.

€137.69 €173.10

-€27.46

THRASHIN SUPPLY CO. Master Cylinder Cover — Black, Silver

6061 aircraft-grade aluminum master cylinder cover; hardware included; reuses factory OEM gasket; made in the USA.

€77.72 €105.18

1-1/2" Strip Handlebar — 1-1/2" clamp, 32" width, 11" rise

-€100.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamp, 32" width, 11" rise

Polished welds, slotted for internal wiring, and notched for electronic throttle; accepts heated grips and requires special risers and clamps.

€390.35 €490.73

1-1/2" Strip Handlebar — 1-1/2" clamp, 13" rise, 32" width, Chrome

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamp, 13" rise, 32" width,...

Made in the USA with polished welds.

Slotted for internal wiring; pre-drilled for heated grips.

Notched for throttle-by-wire; works with OEM heated grips.

Requires special risers and clamps (sold separately).

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise

-€105.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise

Polished welds and gloss finish
Slotted for internal wiring
Notched for electronic throttle
Requires special risers and clamps
Works with OEM heated grips
Made in the USA

€409.83 €515.21

1-1/2" Strip Handlebar — 38 mm clamp, 23 cm center width, 81.5 cm width

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 23 cm center width, 81.5...

Strip-style handlebar with internal wiring slots and throttle notch.

Polished welds
Pre-drilled for controls
Works with OEM heated grips

€307.16 €386.14

1-1/2" Strip Handlebar — Clamping diameter 38 mm (1-1/2"), Rise 38 cm (15")

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — Clamping diameter 38 mm (1-1/2"),...

Strip-style ape hanger profile for a custom look
Slotted for internal wiring and pre-drilled
Notched for electronic throttle; accepts heated grips
Requires special risers and clamps

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm clamping diameter, 89 cm width, 45.5 cm rise

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamping diameter, 89 cm width,...

Strip handlebar with polished welds, slots for internal wiring, and a throttle notch. Made in the USA.

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm clamp, 53.3 cm rise, 89 cm width

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 53.3 cm rise, 89 cm width

Clean ape-hanger style with internal wiring slots, throttle notch, polished welds, and OEM heated-grip compatibility.

€307.16 €386.14

1" Handlebar — 31-1/2" width, 1" clamping diameter, 4" rise, Black

-€47.76

THRASHIN SUPPLY CO. 1" Handlebar — 31-1/2" width, 1" clamping diameter, 4" rise,...

Laser-etched Thrashin® handlebar pre-drilled for internal wiring; TBW keyholes for late-style fitments; knurled center; made in the United States.

€134.98 €182.74

-€50.64

THRASHIN SUPPLY CO. 1" Handlebar — 1" clamp, 31-1/2" width, 4" rise

Thrashin® handlebar with laser-etched logo, pre-drilled for internal wiring, TBW keyholes, and knurled center for improved clamp grip. Made in U.S.A.

€143.30 €193.94

-€59.60

THRASHIN SUPPLY CO. 1" Handlebar — 25.4 mm clamp, 14 cm rise, 78.5 cm width

High-bend 1" handlebar with laser-etched Thrashin® logo, drilled routing for internal wiring, TBW keyholes and knurled center for superior clamp grip.

€168.45 €228.05

$Grips — 25.4 mm (1\"), Chrome$

-€43.03

TODD'S CYCLE Grips — 25.4 mm (1\"), Chrome

Unique, top-end custom designs. Brass one-piece construction. Fits 1" handlebars. Made in the USA.

€167.33 €210.36

Bone Bar Handlebar Clamp & Riser Kit — Rise 25.4 mm (1"), Clamp 25.4 mm (1"), 1/2-13, Black

-€50.74

TODD'S CYCLE Bone Bar Handlebar Clamp & Riser Kit — Rise 25.4 mm (1"),...

One-piece clamp riser kit for Bone Bar with riser tapped for standard bolts and made in the USA.

€197.38 €248.12

-€21.02

THRASHIN SUPPLY CO. Handlebar Clamp — 25.4 mm (1") clamping diameter, Polished finish

Precision 6061 billet handlebar clamp for use with most '74-'24 Harley-Davidson models with 3-1/2" on-center risers and offset mounting holes. Made in the USA.

€59.43 €80.45

-€17.98

THRASHIN SUPPLY CO. Handlebar Clamp — 1" (25.4 mm), Black Anodized

6061 aircraft-grade billet aluminum clamp; fits most '74-'24 Harley-Davidson models with 3-1/2" on-center risers.

€50.90 €68.88

-€80.34

TODD'S CYCLE 1" Strip Handlebar — Width 69 cm (27-1/4"), Rise 20.5 cm (8")

Stripper-style handlebar made from thick-wall steel with polished welds, slotted for internal wiring and no knurling.

€312.43 €392.77

-€76.67

TODD'S CYCLE 1" Strip Handlebar — 75 cm (29-1/2"), 1" clamp, chrome

Strip handlebar slotted for internal wiring, pre-drilled for controls, with polished welds and a smooth, unknurled grip. Made in the U.S.A.

€298.17 €374.84

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls