Handlebars & Controls (2)

Brake and Clutch Cylinder Cover — Harley-Davidson Touring 2016–2020, Black

-€26.47

CULT WERK Brake and Clutch Cylinder Cover — Harley-Davidson Touring...

Precision machined replacement covers for Harley-Davidson Touring models 2016–2020. Easy two-screw installation; interior geometry matches the original for seal compatibility.

€152.70 €179.17

Brake and Clutch Cylinder Cover Racing — fits V-Rod, Night Rod, Night Rod Special 2007–2017, Black

-€26.47

CULT WERK Brake and Clutch Cylinder Cover Racing — fits V-Rod, Night...

Precision-milled replacement covers for the clutch and brake cylinders on Harley-Davidson V-Rod, Night Rod and Night Rod Special (2007–2017). Easy to install; original seal retained. Approximately 25mm higher than stock.

€152.70 €179.17

Hand Grips — 25.4 mm (1") fit, black powder-coated

-€14.65

CULT WERK Hand Grips — 25.4 mm (1") fit, black powder-coated

Precision-machined handlebar grips for many Harley-Davidson models with electronic throttle. Comfortable, durable, and easy to install.

€84.52 €99.17

Hand Grips — 25.4 mm (1") handlebar fit, black, powder-coated

-€24.00

CULT WERK Hand Grips — 25.4 mm (1") handlebar fit, black, powder-coated

Precision-machined hand grips for Harley-Davidson motorcycles; durable protective finish and ergonomic design for improved control.

€138.50 €162.50

-€14.17

EMGO 1" Handlebar — 32" width, 12" rise, 1" diameter

Popular bends for a classic cruiser look. Verify handlebar dimensions before ordering.

€40.05 €54.22

-€15.07

EMGO 1" Handlebar — 32" width, 14" rise

Popular bends for a classic silhouette. Verify handlebar dimensions before ordering.

€42.59 €57.66

-€16.27

EMGO 1" Handlebar — 32" width, 16" rise, 7-1/2" pullback

Popular bends for classic styling; verify handlebar dimensions before ordering.

€45.98 €62.25

-€14.47

EMGO 1" Handlebar — 33" width, 7" rise

Popular bends in high-strength carbon steel; verify handlebar dimensions before ordering.

€40.90 €55.37

-€8.30

EMGO 1" Handlebar — 25.4 mm diameter, 73.5 cm (29") width

Popular bends; verify handlebar dimensions before ordering.

€23.45 €31.75

1" Handlebar — 1" diameter, 34-1/2" width, 8-1/2" rise, 7-1/2" pullback, Chrome

-€13.26

EMGO 1" Handlebar — 1" diameter, 34-1/2" width, 8-1/2" rise, 7-1/2"...

Popular bends for a comfortable, classic riding position. Verify handlebar dimensions before ordering.

€37.49 €50.75

1" Handlebar — 25.4 mm (1"), 71 cm (28"), 21.5 cm (8-1/2") rise, 25.5 cm (10") pullback, Chrome

-€12.97

EMGO 1" Handlebar — 25.4 mm (1"), 71 cm (28"), 21.5 cm (8-1/2")...

Popular bends; verify dimensions before ordering.

€36.65 €49.62

-€17.23

EMGO 1" T-Bar Handlebar — 1" diameter, 8" rise, 24" width

High-strength carbon steel construction. Verify dimensions before ordering. Does not accept H-D OEM heated grips.

€48.72 €65.95

1" Handlebar — 1" diameter, 28" width, 10" rise, 4" pullback

-€21.08

EMGO 1" Handlebar — 1" diameter, 28" width, 10" rise, 4" pullback

Popular bends made from high-strength carbon steel. Verify handlebar dimensions before ordering.

€59.57 €80.65

1" Handlebar — 32" width, 12" rise, 1" diameter, Black

-€13.87

EMGO 1" Handlebar — 32" width, 12" rise, 1" diameter, Black

Ape hanger handlebar with smooth bends; verify dimensions before ordering.

€39.19 €53.06

-€3.43

SW-MOTECH T-Lock Holder for Socket Arm — Black

Quickly and securely attach accessory bags to the handlebar; adjustable via ball-and-socket joint. Includes mounting material and instructions.

€13.38 €16.81

-€8.60

SW-MOTECH GPS Mount Kit for Tead Tube with T-Lock — 1" ball, Black

T-Lock GPS mount for head-tube attachment; 1" ball compatible. Includes socket arm, M8 ball adapter, ball joint with plate, mounting material and instructions.

€33.42 €42.02

Universal GPS Mount kit with T-Lock Smartphone big — fits smartphones up to 165 x 80 x 12 mm

-€9.46

SW-MOTECH Universal GPS Mount kit with T-Lock Smartphone big — fits...

Universal mounting kit with T-Lock smartphone holder, silicone straps, adjustable ball joints and handlebar clamp for 22/28/1 in. Includes mounting hardware and instructions.

€36.76 €46.22

T-Lock Holder for Smartphone small — Black, Plastic

-€2.58

SW-MOTECH T-Lock Holder for Smartphone small — Black, Plastic

Quick-mount T-Lock holder for smartphones with outer dimensions 130 x 70 x 6 mm (min) to 150 x 75 x 10 mm (max). Includes mounting material and instructions. Total weight appr. 0.1 lb.

€10.03 €12.61

T-Lock Holder for Smartphone Big — Black

-€2.58

SW-MOTECH T-Lock Holder for Smartphone Big — Black

Quick, secure T-Lock holder for large smartphones. Fits up to 165 x 80 x 12 mm; minimum 144 x 71 x 7 mm (two of three dimensions required). Includes mounting material and instructions.

€10.03 €12.61

-€17.19

SW-MOTECH 30mm Bar Riser — 30 mm, powder-coated

Increases handlebar height by 30 mm for improved comfort. Bike-specific fit; no cable extension required. Kit includes 2 risers, instructions and mounting hardware.

€66.84 €84.03

-€20.62

SW-MOTECH 50mm Bar Riser — 50 mm, 32 mm clamp, black powder-coated

Raises the handlebar by 50 mm for improved seating position and comfort. Bike-specific fit; no cable extensions needed. Includes mounting kit and instructions.

€80.22 €100.84

Riser For Harley V Rod Night Rod Special — Black anodized, aluminum

-€19.57

CULT WERK Riser For Harley V Rod Night Rod Special — Black anodized,...

CNC-milled aluminum risers, 45mm height. Fits original and other 1-inch accessory handlebars; exact fit for V Rod, Night Rod, NRS and Mucsle models. Black anodized finish.

€112.93 €132.50

1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1" clamp, 12" center width

-€173.51

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 1-1/4" diameter, 1"...

Complete installation kit with matching braided cables, brake lines, and preloaded pull-thru sleeving for easier wiring and a factory look.

€651.84 €825.35

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") handlebar, 25.4 mm (1") clamp, chrome

On sale!
-€154.52

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking handlebar kit with matching braided cables and brake lines, preloaded pull‑through sleeving, and machined control mounts. Assembled in the U.S.A.

€580.50 €735.02

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") diameter, 30.5 cm (12") center width, 25.4 mm (1") clamp

-€200.01

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking 1-1/4" handlebar kit with braided cables, preloaded pull-thru sleeving and all necessary hardware for fast installation.

€751.41 €951.42

1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4") diameter, 25.4 mm (1") clamp

-€220.90

MAGNUM SHIELDING 1-1/4" Viking Handlebar Installation Kit — 32 mm (1-1/4")...

Complete Viking handlebar installation kit with matching braided cables, brake lines, preloaded pull-thru sleeving and all required hardware. Assembled in the U.S.A.

€829.89 €1,050.79

1-1/4" Viking Handlebar — 1-1/4" diameter, 7-3/4" center width, Chrome

-€88.14

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 7-3/4" center...

Patented internal routing design for easy full-harness installation and a clean routed look. Preloaded with E-Z pull-thru sleeving for fast wiring runs. CNC mandrel bends and machined control mounts for durable, high-quality fit and finish. Not compatible with stock risers or clamp/gauge mounts on 883C and 1200C models.

€331.15 €419.29

-€88.14

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1" center section, 1" clamp, chrome

Patented Viking handlebar with internal wiring routing for clean, easy installations.

€331.15 €419.29

1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center, 35-1/2" width

-€87.71

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center, 35-1/2"...

Patented Viking internal design for easy wiring harness installation, preloaded with E-Z pull-thru sleeving; machined mounts and high-luster finish.

€329.50 €417.21

-€96.76

MAGNUM SHIELDING 1-1/4" Viking Handlebar — 1-1/4" diameter, 1" center

Patented internal routing for easy wiring installations, preloaded E‑Z sleeve, CNC mandrel bends, machined mounts, high-luster finish.

€376.30 €473.06

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls