Intake

Fuel Tank Crossover Line — 7.9 mm (5/16"), 117 mm (4-5/8"), Silver

-€7.60

DRAG SPECIALTIES Fuel Tank Crossover Line — 7.9 mm (5/16"), 117 mm (4-5/8"),...

Replaces stock rubber lower crossover lines with stainless steel lines and compression fittings; made in the USA.

€21.49 €29.09

ThunderMax Engine Control Module Kit with Integral Auto Tune — Black kit, Autotune, Part 309-362

-€253.84

THUNDERMAX ThunderMax Engine Control Module Kit with Integral Auto Tune —...

Complete ThunderMax ECM kit with integral auto-tune, wide-band sensors, harness, software and USB cable for easy install and continuous closed-loop tuning.

€987.15 €1,240.99

Twin Tuner II Fuel Injection Controller — 4 in x 2 in x 0.5 in, Black

-€82.83

DAYTONA TWIN TEC LLC Twin Tuner II Fuel Injection Controller — 4 in x 2 in x 0.5...

Compact fuel-injection and ignition controller that enables on-bike trimming via pushbuttons and advanced PC tuning with USB and PC Link Tuner; supports independent cylinder adjustments and Twin Scan II+ workflow.

€322.13 €404.96

Twin Tuner II Fuel Injection Controller — 4" L x 2" W x 1/2" H, Black

-€53.99

DAYTONA TWIN TEC LLC Twin Tuner II Fuel Injection Controller — 4" L x 2" W x 1/2"...

Easily adjusts OEM Delphi fuel injection and ignition for many performance parts
Bright LED displays fuel trim; mode and up/down buttons for quick tuning
Advanced tuning via optional USB interface and PC Link Tuner; independent front/rear control
Includes ignition timing control; plug-in installation with no splicing
Compact size: 4" L x 2" W x 1/2" H

€157.17 €211.16

Fuel Tank Crossover Line — 5/16" ID, 8-1/4" length, Silver

-€7.60

DRAG SPECIALTIES Fuel Tank Crossover Line — 5/16" ID, 8-1/4" length, Silver

Replaces stock rubber lower crossover lines with stainless steel lines. Seals with compression fittings for a positive seal. Made in the USA.

€21.49 €29.09

Universal Fuel Line — 1/4" ID, 25' length, Black

-€3.58

EMGO Universal Fuel Line — 1/4" ID, 25' length, Black

Universal fuel line for general automotive and powersports use. Not for fuels over 10% alcohol.

€10.14 €13.72

-€4.42

EMGO Universal Fuel Line — 5/16" (7.9 mm), 25' (7.6 m), Black

Universal 25' fuel line. Not for use with fuels over 10% alcohol.

€12.50 €16.92

-€1.43

DRAG SPECIALTIES Replacement Washers — Fuel Line, Silver, 6-pack

Replacement washers for fuel tank crossover lines. Durable construction; made in the USA.

€4.02 €5.45

ThunderMax Engine Control Module Kit with Integral Auto Tune — Black

-€260.18

THUNDERMAX ThunderMax Engine Control Module Kit with Integral Auto Tune —...

Complete ECM kit with integral auto-tune, plug-in harness, two wide-band O2 sensors, PC software and USB cable; easy install and free updates.

€1,011.83 €1,272.01

ThunderMax Engine Control Module Kit with Integral Auto Tune — Black, 309-460

-€253.84

THUNDERMAX ThunderMax Engine Control Module Kit with Integral Auto Tune —...

Plug-and-play ThunderMax ECM kit with integral auto-tune, downloadable maps, live datalogging and easy installation. Made in the USA.

€987.15 €1,240.99

-€17.18

DRAG SPECIALTIES "Bob" Retro-Style Air Cleaner Kit — 5.50", Super E and G, Chrome

Retro-style air cleaner with reusable foam filter and included mounting hardware.

€48.53 €65.71

-€253.84

THUNDERMAX ThunderMax Engine Control Module Kit with Integral Auto Tune —...

Complete plug‑in control module kit with wide‑band oxygen sensors and harness.
Hundreds of downloadable maps; integral self‑tuning adjusts air/fuel in real time.
Live datalogging and diagnostics; adjustable ignition and startup maps.

€987.15 €1,240.99

-€253.84

THUNDERMAX ThunderMax Engine Control Module Kit with Integral Auto Tune —...

Complete engine control module kit with integral auto-tune, plug-in harness, wide-band sensors, USB communication cable and comprehensive user manual. Enables live monitoring, downloadable maps and continuous self-adjusting AFR for improved throttle response and driveability.

€987.15 €1,240.99

-€6.52

DRAG SPECIALTIES Repair Kit for Bendix Carburetor — Black, Red, Blue, Gray

Complete gasket and seal kit with accelerator pump for rebuilding Bendix carburetors.

€18.43 €24.95

-€7.02

DRAG SPECIALTIES Air Cleaner Adapter — Dragtron II, Machined

Adapter that enables installation of compatible air cleaner assemblies to the intake system.

€19.83 €26.85

-€10.07

DRAG SPECIALTIES EFI Fuel Line — Black, T02-0089

Direct OEM-quality replacement EFI fuel line from tank to fuel rail. Includes connectors for straightforward installation.

€28.47 €38.54

$Fuel Inlet Fitting — 6.4 mm (1/4\") fuel line, Gold$

-€1.47

DRAG SPECIALTIES Fuel Inlet Fitting — 6.4 mm (1/4\") fuel line, Gold

Durable fuel inlet fitting with a compact design for easy installation. Sold each.

€4.16 €5.63

-€11.50

DRAG SPECIALTIES EFI Fuel Line — Black, T02-0090

Direct-fit replacement fuel line for the run from tank to fuel rail. Includes necessary connectors and OEM-quality construction.

€32.50 €44.00

-€4.66

DRAG SPECIALTIES Carburetor Rebuild Kit for Keihin — For butterfly carburetors

Complete kit with gaskets, seals, jets and needles to rebuild butterfly-style or CV-style Keihin carburetors.

€13.16 €17.82

-€4.73

DRAG SPECIALTIES Carburetor Rebuild Kit for Keihin — For CV carburetors, Black

Complete kit to rebuild butterfly-style and CV-style Keihin carburetors.

€13.35 €18.08

-€11.45

DRAG SPECIALTIES EFI Fuel Line — Black

High-quality OEM replacement that replaces the fuel line from the tank to the fuel rail and includes necessary connectors.

€32.38 €43.83

-€13.75

DRAG SPECIALTIES Rebuild Kit for Linkert Carburetor — Gold finish

Complete rebuild kit includes foam float, needle, seat, gaskets, springs and bushings to restore fuel metering and smooth operation.

€38.88 €52.63

-€7.67

DRAG SPECIALTIES Fuel & Oil Line — 6.3 mm (1/4"), 91 cm (3'), Black

Reinforced synthetic rubber, smooth-bore line resistant to fuel and oil. Made in the USA.

€21.67 €29.34

-€6.71

DRAG SPECIALTIES Fuel & Oil Line — 7.9 mm (5/16"), 91 cm (3'), Black

Reinforced synthetic rubber fuel and oil line with a smooth bore; made in the USA.

€18.98 €25.69

EFI Fuel Line Fitting Cover — Fuel Injected, Chrome

-€4.89

DRAG SPECIALTIES EFI Fuel Line Fitting Cover — Fuel Injected, Chrome

Covers the OEM fitting at the tank bottom. Two-piece design for easy installation.

€13.82 €18.71

-€1.46

FUEL-TOOL Replacement O-Ring for Fuel Check Valve — Viton, Black

Durable replacement O-ring for fuel check valves. Prevents unnecessary replacement of the check valve and fuel line; made from high-quality Dupont® Viton®; made in the USA.

€4.11 €5.57

-€253.84

THUNDERMAX ThunderMax Engine Control Module Kit with Integral Auto Tune —...

Self-tuning engine control kit with downloadable maps, live datalogging, closed-loop wide-band tuning and simple plug-in installation — improves throttle response and driveability.

€987.15 €1,240.99

-€4.05

FUEL-TOOL Replacement O-Ring for Fuel Check Valve — 5-Pack, Black, Viton

Seals worn fuel check valves to stop leaks and avoid replacing the valve or fuel line. Made in the USA.

€11.44 €15.49

-€253.84

THUNDERMAX ThunderMax Engine Control Module Kit with Integral Auto Tune —...

Complete plug-in ECM kit with integral auto-tune, wide-band sensors, TMax software and easy install.

€987.15 €1,240.99

-€4.07

FUEL-TOOL Fuel Check Valve Rebuild Kit — Fuel-injected

Rebuild kit that restores the fuel check valve—includes Dupont® Viton® O-rings, a nickel-plated brass check valve and stainless steel springs. Made in the USA.

€11.50 €15.57

shop by category

Intake

Intake

Subcategories

Air Cleaners

Carburetors & Accesories

Fuel Injection

Fuel pumps and lines

Contact us

Products

Our company

shop by category

Intake  

Intake

Subcategories

Air Cleaners

Carburetors & Accesories

Fuel Injection

Fuel pumps and lines

Intake