Engine

-€19.20

DRAG SPECIALTIES Crankcase Vent Line — Chrome

Durable replacement for the OEM rubber crankcase-to-oil tank line; includes fittings for easy installation; made in the USA.

€54.26 €73.46

V80 Long-Block Engine — 80" displacement, 4.250" stroke, 3.500" bore, 8.4:1 compression, Wrinkle Black

-€188.63

S&S CYCLE V80 Long-Block Engine — 80" displacement, 4.250" stroke,...

Stock-height long-block replacement for 80" H-D Evolution engines featuring S&S performance heads, oil pump, flat-top pistons, 585 valve springs and forged rocker arms. Fuel and ignition not included; EFI compatible (calibration required).

€5,344.73 €5,533.36

-€44.73

DRAG SPECIALTIES Stainless Steel Braided Oil Line Kit — 4-line kit, chrome

Complete replacement kit with chrome-plated compression and NPT fittings. Direct OEM-fit replacement; made in the USA.

€126.42 €171.15

-€189.19

S&S CYCLE V80 Long-Block Engine — 80" displacement, 4.25" stroke, Silver

Stock-height long-block; direct bolt-in replacement for aging H‑D Evolution engines. Machined heads accept stock-length manifolds. Includes S&S heads, oil pump, flat-top pistons, 585 springs, forged rockers and 508 cam. Fuel/ignition not included; EFI compatible (tune required). Made in the USA.

€5,360.44 €5,549.63

V80 Complete Assembled Engine — 80", 3.500" bore, 4.250" stroke, air-cooled

-€224.10

S&S CYCLE V80 Complete Assembled Engine — 80", 3.500" bore, 4.250"...

Complete, assembled V80 engine for carbureted applications; installs in stock frames matching '84–'99 Evolution Big Twin dimensions.

€6,349.69 €6,573.79

Universal Stainless Steel Braided Oil Line — 8.7 mm (11/32"), 205 mm (8"), 1/8" NPT, Chrome

-€8.07

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 8.7 mm (11/32"),...

Universal braided oil line with compression fittings; measured overall including fittings; made in the USA.

€22.78 €30.85

T111 Long Block Engine — 111 cu in, 4.125 in bore, 4.125 in stroke

-€294.08

S&S CYCLE T111 Long Block Engine — 111 cu in, 4.125 in bore, 4.125 in...

Long block replacement with Super Stock™ heads, TC3 oil pump, and Easy start 585 cams. Intake not included.

€8,332.33 €8,626.41

T124 Low Compression Long Block Engine — 124 in³ displacement, 10.2:1 compression

-€307.39

S&S CYCLE T124 Low Compression Long Block Engine — 124 in³ displacement,...

A low compression long block built for reliable street use; includes heads, crankcase, high-flow oil pump and gear drive cams. Long block only.

€8,709.19 €9,016.58

-€19.12

DRAG SPECIALTIES Fuel/Oil Line — 9.5 mm (3/8"), 244 cm (8'), Black

Reinforced smooth-bore fuel and oil line that resists fuel and oil. Made in the USA.

€54.05 €73.17

-€5.94

DRAG SPECIALTIES Fuel/Oil Line — 12.7 mm (1/2"), 61 cm (24")

Reinforced, smooth-bore fuel- and oil-resistant line for reliable service.

€16.81 €22.75

-€3.01

DRAG SPECIALTIES Oil Line Retainer Assembly — 3/8" retainer, black

Secures oil lines from the oil tank to the engine. Replacement recommended when lines are removed. O-rings included.

€8.51 €11.52

-€3.01

DRAG SPECIALTIES Oil Line Retainer Assembly — 1/2" retainer, black

Secures oil lines from the oil tank to the engine. Replacement recommended when lines are removed. O-rings included.

€8.51 €11.52

-€41.92

S&S CYCLE Oil Line Kit — fits '07–'16 Touring, Black, Silver, Gold

Complete oil line kit for S&S crankcase installs on '07–'16 Touring models. Includes formed adapter, oil lines, fittings and clamps. Made in the USA.

€163.02 €204.94

-€17.44

DRAG SPECIALTIES Oil Filter Line Kit — Chrome

Complete oil filter line kit with OEM-style feed and return lines, compression fittings, seals, and nuts for easy installation.

€49.31 €66.75

-€5.09

DRAG SPECIALTIES Lower Fitting Seals — 10 Pack, Black

Seals for lower fittings used on oil feed and return lines; replace worn seals to prevent leaks.

€14.40 €19.49

-€6.32

DRAG SPECIALTIES Lower Fitting Seals — 10 pack, brown

Seals for lower fittings on oil feed and return lines; replace when worn to prevent leaks.

€17.86 €24.18

-€8.88

S&S CYCLE Oil Pump Compression Return Fitting — 50-8120, Chrome

Precision compression return fitting for oil pump installations. Made in the USA. Easy to install.

€25.05 €33.93

-€8.82

S&S CYCLE Supply/Return Line Elbow — 90° return line, Black

Precision elbow fitting for fluid routing. Made in the USA. Easy to install.

€34.32 €43.14

-€1.65

S&S CYCLE Fitting 1/8-27 — 1/8" NPT female, silver

Easy-to-assemble, high-quality fitting for reliable connections.

€6.52 €8.17

-€4.28

S&S CYCLE Fitting 1/8-27 — 1/8" NPT male, brass

Easy-to-assemble high-quality fitting for reliable hose connections.

€10.38 €14.66

-€1.03

DRAG SPECIALTIES Oil Drain Elbow — Black, Rubber

Directs used oil cleanly into a drain pan to minimize spills during oil changes.

€2.91 €3.94

-€10.05

S&S CYCLE Oil Control Valve — 310-1150, Black, Silver

Helps regulate oil flow to the cooler and heads. Durable billet aluminum construction, steel check ball retainer, easy to install. Made in the USA.

€39.08 €49.13

-€44.31

DRAG SPECIALTIES Radiator Shield — Black, aluminum

Protects the radiator from impacts and debris with durable construction for long-term use.

€125.23 €169.54

$Stainless Steel Braided Hose — 6.4 mm (1/4\"), 91 cm (3'), Stainless steel$

-€5.26

DRAG SPECIALTIES Stainless Steel Braided Hose — 6.4 mm (1/4\"), 91 cm (3'),...

Suitable for oil and gas applications. Not for use with fuel over 10% alcohol. Inspect regularly and replace if worn.

€14.85 €20.11

-€5.53

DRAG SPECIALTIES Stainless Steel Braided Hose — 7.9 mm (5/16"), 91 cm (3')

Hose for oil and gas applications. Not for use with fuel over 10% alcohol.

€15.65 €21.18

-€10.69

DRAG SPECIALTIES Stainless Steel Braided Hose — 5/16" ID, 6' length

Suitable for oil and gas applications. Not for use with fuels over 10% alcohol.

€30.23 €40.92

Stainless Steel Braided Hose — 3/8" (9.5 mm) ID, 6' (183 cm), Fuel/Oil

-€11.24

DRAG SPECIALTIES Stainless Steel Braided Hose — 3/8" (9.5 mm) ID, 6' (183 cm),...

For oil and gas applications. Do not use with fuel over 10% alcohol.

€31.76 €43.00

Black Braided Hose — 7.9 mm (5/16"), 183 cm (6'), -5 hose, Fuel/Oil

-€9.74

DRAG SPECIALTIES Black Braided Hose — 7.9 mm (5/16"), 183 cm (6'), -5 hose,...

Nylon braided hose with abrasion-resistant covering; suitable for fuel and oil applications.

€27.55 €37.29

Black Braided Hose — 9.5 mm (3/8"), 183 cm (6')

-€10.60

DRAG SPECIALTIES Black Braided Hose — 9.5 mm (3/8"), 183 cm (6')

Black braided hose with a durable covering; suitable for fuel or oil applications.

€29.94 €40.54

-€7.24

DRAG SPECIALTIES Black Braided Hose — 1/2" ID, 3' length

Durable braided hose suitable for fuel and oil applications. Sold each.

€20.45 €27.69

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine