Engine (7)

Big Bore Piston — Bore 3.875", Oversize +0.005", Compression ratio 10.25:1

-€30.22

DRAG SPECIALTIES Big Bore Piston — Bore 3.875", Oversize +0.005", Compression...

Big bore piston for Twin Cam engines, precision-machined for durability and performance.

€85.40 €115.62

-€2.22

JAGG OIL COOLERS Replacement Gasket Service Kit — JAGG OIL COOLERS, GK4600, Black

Service kit with replacement gasket for oil filter adapter; made in the USA.

€8.64 €10.86

$Stainless Steel Braided Hose — 6.4 mm (1/4\"), 91 cm (3'), Stainless steel$

-€5.26

DRAG SPECIALTIES Stainless Steel Braided Hose — 6.4 mm (1/4\"), 91 cm (3'),...

Suitable for oil and gas applications. Not for use with fuel over 10% alcohol. Inspect regularly and replace if worn.

€14.85 €20.11

-€51.63

S&S CYCLE H-Grind Camshaft — Gear, Exhaust & Intake

OEM-spec hydraulic camshaft; faithful reproduction of the stock '48–'84 Big Twin cams. Ideal for 74" and 80" engine restorations.

€200.80 €252.43

-€5.53

DRAG SPECIALTIES Stainless Steel Braided Hose — 7.9 mm (5/16"), 91 cm (3')

Hose for oil and gas applications. Not for use with fuel over 10% alcohol.

€15.65 €21.18

-€51.63

S&S CYCLE H-Grind Camshaft — H grind, fits 74" and 80" Big Twin engines

OEM-spec hydraulic replacement camshaft; faithful reproduction of stock '48–'84 Big Twin cams. Ideal for repair and restoration of 74" and 80" engines; available for generator and alternator applications.

€200.80 €252.43

-€192.09

S&S CYCLE 551G Gear Drive Camshaft Kit — 551 Series grind

Bolt-in cam set for 96–106 CID engines (9:1–9.9:1). Improves low- and midrange torque and timing accuracy; professional installation required.

€747.05 €939.14

-€84.68

S&S CYCLE 551C Chain Drive Camshaft Kit — Chain, 551 Series

Bolt-in cam set for 96–106 CID engines; improves low and midrange torque. Fits models with hydraulic tensioner chain drive.

€329.33 €414.01

-€84.68

S&S CYCLE 583C Chain Drive Camshaft Kit — 583 Series grind

Great cam for Softail and Dyna; strong low-end torque and horsepower. Best from 1500–5000 rpm. Installer must check coil bind and clearances. Not for compression ratios > 10.1:1.

€329.33 €414.01

-€10.69

DRAG SPECIALTIES Stainless Steel Braided Hose — 5/16" ID, 6' length

Suitable for oil and gas applications. Not for use with fuels over 10% alcohol.

€30.23 €40.92

-€119.17

S&S CYCLE 640 Easy Start Camshaft Kit — 95/96/103/110 cu in, 10.5:1–11.5:1

Reduces starting compression for easier starts, then fully retracts at higher rpm for full performance. For 95/96/103/110 engines, 10.5:1–11.5:1. Not for models with OEM compression releases. High-lift springs and adjustable pushrods required.

€346.94 €466.11

Stainless Steel Braided Hose — 3/8" (9.5 mm) ID, 6' (183 cm), Fuel/Oil

-€11.24

DRAG SPECIALTIES Stainless Steel Braided Hose — 3/8" (9.5 mm) ID, 6' (183 cm),...

For oil and gas applications. Do not use with fuel over 10% alcohol.

€31.76 €43.00

-€92.57

FEULING OIL PUMP CORP. Reaper® 505/515 Cam — Split lift, Exhaust 248°, Intake 239°

Wide, rideable powerband for stock engines.

Split lift character with top fuel sound.

Use with stock pushrods and valve springs; lifter change recommended.

€360.00 €452.57

-€35.45

FEULING OIL PUMP CORP. Camshaft Installation Kit — Part 2058

Complete camshaft installation kit with gaskets, bearings, bolts and seals for full cam and crank service. Made in the USA.

€137.85 €173.30

Black Braided Hose — 7.9 mm (5/16"), 183 cm (6'), -5 hose, Fuel/Oil

-€9.74

DRAG SPECIALTIES Black Braided Hose — 7.9 mm (5/16"), 183 cm (6'), -5 hose,...

Nylon braided hose with abrasion-resistant covering; suitable for fuel and oil applications.

€27.55 €37.29

-€43.40

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit — Model Plus, P/N 2059

Complete installation kit with gaskets, bearings, and ARP® hardware for reliable camshaft assembly.

€168.76 €212.16

Black Braided Hose — 9.5 mm (3/8"), 183 cm (6')

-€10.60

DRAG SPECIALTIES Black Braided Hose — 9.5 mm (3/8"), 183 cm (6')

Black braided hose with a durable covering; suitable for fuel or oil applications.

€29.94 €40.54

Big Bore Piston Kit — +0.010 in oversize, 4.250 in bore, 4.375 in stroke, 124 cu in displacement

On sale!
-€97.48

S&S CYCLE Big Bore Piston Kit — +0.010 in oversize, 4.250 in bore, 4.375...

Complete piston kit with pistons, rings, wristpins, and clips. Compression ratios are approximate.

€379.03 €476.51

Piston Kit Big Bore 4.250" for M8 Models — Bore 4.250", Displacement 128", Stroke 4.500"

-€135.98

S&S CYCLE Piston Kit Big Bore 4.250" for M8 Models — Bore 4.250",...

Durable, precisely machined piston kit that delivers reliable compression and long service life. Built for easy installation and consistent operation.

€528.83 €664.81

-€7.24

DRAG SPECIALTIES Black Braided Hose — 1/2" ID, 3' length

Durable braided hose suitable for fuel and oil applications. Sold each.

€20.45 €27.69

-€109.47

S&S CYCLE HP103 Easy Start Camshaft Kit — Grind HP103, Chain

Easy-start camshaft kit for 103" engines; bolt-in design, high-rpm power band, includes hardware. Not for models with OEM compression releases.

€425.73 €535.20

Stainless Steel Mini-Clamps — For 3/8" oil/fuel lines, 10 pack

-€5.79

DRAG SPECIALTIES Stainless Steel Mini-Clamps — For 3/8" oil/fuel lines, 10 pack

Compact clamps for small-diameter hoses and tubing. Designed for use on oil and gas lines up to 3/8" in diameter. Made in the USA.

€16.36 €22.15

On sale!
-€101.30

S&S CYCLE 640 Easy Start Camshaft Kit — Chain, S&S CYCLE 330-0331

Reduces crank compression for easier starts, then restores full compression for normal running. Fits 95", 96", 103" and 110" engines with 10.5:1–11.5:1 compression; requires high-lift springs and adjustable pushrods. Not for models with OEM compression releases.

€393.94 €495.24

-€5.78

DRAG SPECIALTIES Chrome Rocker Oil Lines — Chrome

Overhead oil line set with crossover and crankcase-to-rocker box line; includes fittings and seals.

€16.34 €22.12

-€216.89

S&S CYCLE MR103 Easy Start Camshaft kit — Gear type

Bolt-in camshaft kit for easier starting on 103" engines; restores full compression once running. Includes cams and hardware; installer must verify clearances.

€843.44 €1,060.33

-€5.88

DRAG SPECIALTIES Chrome Rocker Oil Lines — Rocker set

Overhead oil line set includes crossover and crankcase-to-rocker box lines; fittings and seals included and available separately.

€16.60 €22.48

On sale!
-€170.11

S&S CYCLE 635 H.O. Gear Drive Camshaft Kit — Gear drive, Raw finish

High‑lift camshaft kit for modified engines 106"+ displacement; increases accuracy by removing chain lash; requires professional installation and press.

€661.56 €831.67

-€11.75
Out of Stock

GOODRIDGE Hose — Oil line, Chrome

Replacement hose for repair or upgrade.

€45.55 €57.30

-€60.31

FEULING OIL PUMP CORP. OE+ Camplate — 6061 aluminum

Direct bolt-in replacement for '99–'06 Twin Cam® camshafts. Pre-set pressure relief valve (50–60 psi), added cam journal oil groove, accepts factory oil pump. Includes bearing retainer plate and hardware. Made in USA.

€234.53 €294.84

-€65.93

FEULING OIL PUMP CORP. OE+ Camplate — Fits '99–'06 Twin Cam®

Direct bolt-in camplate for '99–'06 Twin Cam® engines; pre-set relief valve (50–60 psi), added oil grooves and feed holes, includes retainer plate and hardware.

€256.36 €322.29

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company