Engine (35)

$Steel Breather Gear Kit — Oversized +0.03\", requires matching cam and pinion$

-€38.85

S&S CYCLE Steel Breather Gear Kit — Oversized +0.03\", requires matching...

Includes gear and spacer; requires corresponding cam and pinion; made in the U.S.A.

€151.07 €189.92

-€79.38
Out of Stock

JIMS Chrome Billet Lifter Covers — Pair

Precision CNC-machined lifter covers. Gaskets and screws included. Made in the United States.

€308.69 €388.07

-€140.80

S&S CYCLE Heavy-Duty Connecting Rod Sets — Steel

Complete heavy-duty rod set with front and rear rods, crankpin, reinforced cages and roller bearings. Deep-forged and heat-treated; 0.120" wider than stock and fits strokes up to 5.00". Made in the USA.

€547.52 €688.32

Heavy-Duty Connecting Rod Sets — Set, Heavy Duty, Steel, S&S CYCLE 34-7011

-€140.80

S&S CYCLE Heavy-Duty Connecting Rod Sets — Set, Heavy Duty, Steel, S&S...

Complete kit with front and rear rods, crankpin and nuts, durable cages and roller bearings. Deep-forged and heat-treated, 0.120" wider than stock; rod-to-rod clearance for strokes up to 5.00". Installation may require additional clearancing.

€547.52 €688.32

DRAG SPECIALTIES CONN ROD ASSY F/74-E81 BT

Out of Stock

DRAG SPECIALTIES DRAG SPECIALTIES CONN ROD ASSY F/74-E81 BT

CONN ROD ASSY F/74-E81 BT

€273.93

Connecting Rod Assembly — Steel, Set, 24275-57-BX-LB1

-€79.01

DRAG SPECIALTIES Connecting Rod Assembly — Steel, Set, 24275-57-BX-LB1

Heavy-duty, OEM-spec connecting rod assembly supplied as a complete, ready-to-install set.

€223.28 €302.29

Countershaft Gear Washers — 0.074", 0.078", 0.082", 0.085", 0.090", 0.095", 0.100", Silver

-€10.47

EASTERN MOTORCYCLE PARTS Countershaft Gear Washers — 0.074", 0.078", 0.082", 0.085",...

Replacement countershaft gear washers; set includes 0.074", 0.078", 0.082", 0.085", 0.090", 0.095", 0.100".

€29.56 €40.03

Thrust Washers — 4-speed, countershaft, second gear, 5-pack

-€6.26

EASTERN MOTORCYCLE PARTS Thrust Washers — 4-speed, countershaft, second gear, 5-pack

Durable steel thrust washers that protect transmission components and minimize axial play.

€17.70 €23.96

-€8.36
Out of Stock

EASTERN MOTORCYCLE PARTS Main Drive Gear Bearing Washers — .060" thickness, 5-pack, Silver

Precision spacers for main drive assemblies; help maintain correct preload for smoother operation.

€23.64 €32.00

-€6.26

EASTERN MOTORCYCLE PARTS Mainshaft Washers — Second gear, Third gear, 5 Pack, Silver

High-quality replacement mainshaft washers for reliable gear alignment and smooth operation.

€17.70 €23.96

Out of Stock

EASTERN MOTORCYCLE PARTS Mainshaft Washers

Mainshaft Washers, made in the U.S.A., designed for durability and performance in Harley-Davidson motorcycles.

€17.14

Out of Stock

EASTERN MOTORCYCLE PARTS Mainshaft Washers

Mainshaft Washers, made in the U.S.A., designed for durability and performance in Harley-Davidson motorcycles.

€17.14

-€6.26

EASTERN MOTORCYCLE PARTS Mainshaft Washers — +0.015", 5-pack

Replacement mainshaft washers for reliable gear function.

€17.70 €23.96

Thrust Washers — 4-speed, countershaft, 5-pack

-€6.26

EASTERN MOTORCYCLE PARTS Thrust Washers — 4-speed, countershaft, 5-pack

Precision thrust washers reduce axial play and extend transmission life.

€17.70 €23.96

Countershaft Bearing Retainer Washers — 5 pack, inner, silver

-€5.74

EASTERN MOTORCYCLE PARTS Countershaft Bearing Retainer Washers — 5 pack, inner, silver

Replacement bearing retainer washers for secure bearing retention.

€16.22 €21.96

Tappet Roller Kit — Chromoly Steel, 52100 Steel

-€10.11

JIMS Tappet Roller Kit — Chromoly Steel, 52100 Steel

Precision tappet roller kit for reliable valve-train performance and easy installation. Made in the U.S.A.

€39.28 €49.39

-€16.92

JIMS Oil Pump Drive Shaft — JIMS 26346-36

Precision-ground oil pump drive shaft replacement, made in the U.S.A.

€47.76 €64.68

Oil Pump Component — JIMS, Gear drive oil pump, 26315-68A

-€17.22

JIMS Oil Pump Component — JIMS, Gear drive oil pump, 26315-68A

Replacement oil pump component for Big Twin models; restores gear-driven oil flow and pressure. Inspect seals and clearances during install.

€48.73 €65.95

-€38.38
Out of Stock

JIMS Right-Side Crankcase Bushing — Size +0.002"

Right-side crankcase bushing with 360° oiling and precision fit; made in the U.S.A., recommended for professional rebuilds.

€149.24 €187.62

Flow Pro 1 Billet Oil Pump Complete Assembly — Polished, 6061 billet aluminum

-€190.60

JIMS Flow Pro 1 Billet Oil Pump Complete Assembly — Polished, 6061...

CNC-machined feed and return gears increase flow; complete kit includes cover, gears, seals and mounting hardware.

€741.22 €931.82

Gear-Side Pinion Shaft Nut — 5/8-24 left-hand threads

-€4.94
Out of Stock

JIMS Gear-Side Pinion Shaft Nut — 5/8-24 left-hand threads

Secures the pinion shaft on the gear side; install to specified torque and check endplay after tightening.

€19.22 €24.16

-€51.39
Out of Stock

JIMS Valve Spring Kit — 0.600" lift

Interference double-spring design with damper for harmonic control.
Includes locks, retainers and spring seats.
Built for severe service and high-compression engines.

€199.83 €251.22

-€7.55

ANDREWS Low-Profile Lower Spring Collars — Set of 4

Increases spring travel by .060" for improved suspension response. Precision-machined and made in the U.S.A.

€29.38 €36.93

-€55.83
Out of Stock

S&S CYCLE Valve Spring Kit — 0.550" lift, 140 lb seat pressure

Allows additional rocker clearance for '48-'65 Panheads; includes late single bottom collars for S&S and stock late '81-'85 heads; works with stock-style bottom collars and thin-stem valves with thicker keepers.

€217.09 €272.92

-€11.00
Out of Stock

ANDREWS High-Lift Upper Spring Collars — For 74" and 80" motors, 4 Pack

Accepts cams with up to .600" lift; fits 74" and 80" motors; hard-coated for durability.

€42.81 €53.81

Medium-Lift Upper Spring Collar Set — 4 pack, fits 1966–1984 74" and 80" motors

-€15.25

ANDREWS Medium-Lift Upper Spring Collar Set — 4 pack, fits 1966–1984...

Fits stock springs to add ~0.060" of travel on 1966–1984 74" and 80" motors; eases installation of B or #2 cams; made in the U.S.A.

€59.30 €74.55

-€10.45

ANDREWS Valve Spring Upper Collars — Low-profile lower spring collar,...

Lower-profile valve spring upper collars similar to stock 80-style parts; required for 80-style guides using "K" line stem seals. Compatible with 74" and 80" motors. Heat-treated for durability. Made in the U.S.A.

€40.61 €51.06

-€13.17

ANDREWS High-Lift Valve Spring Kit — cam lifts 0.550", 4-pack

Accommodates cam lifts of .550"+, installs without machining heads. Includes four inner and four outer springs. For use with titanium upper-spring collars; collars sold separately. Made in the U.S.A.

€51.19 €64.36

Xl Front Engine Mount Plates — Front, Chrome

-€14.73

DRAG SPECIALTIES Xl Front Engine Mount Plates — Front, Chrome

Durable XL plates for improved alignment and reliable attachment.

€41.61 €56.34

-€7.56

DRAG SPECIALTIES Front Motor Mount Plate — Front, Chrome

Precision-engineered engine mount plate for OEM-fit alignment and easy bolt-on installation.

€21.35 €28.91

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine