Engine (3)

Reaper® 594 Cam — 594 Series grind, 260° exhaust / 255° intake, 0.604" lift

-€94.15

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series grind, 260° exhaust / 255°...

Fierce-performing camshaft for 103", 110" and 124" engines; boosts torque and horsepower across wide RPM ranges. Made in the USA.

€366.15 €460.30

-€94.15

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, Exhaust 248°, Intake 238°, Pair

Broad, smooth power band with strong low-end torque.

Bolt-in fit for many 88", 96" and 103" engines.

Improves throttle response and fuel mileage; recommended upgrades for some model years.

€366.15 €460.30

Reaper® 594 Cam — 594 Series grind, Intake 255°, Exhaust 260°, Intake lift 0.594", Exhaust lift 0.604"

-€94.15

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series grind, Intake 255°, Exhaust 260°,...

Fierce-performing camshaft for large and small displacements, offering strong torque and horsepower gains; requires complementary performance upgrades. Made in the USA.

€366.15 €460.30

Reaper® 594 Cam — 594 series, Intake 255° 0.594" lift, Exhaust 260° 0.604" lift

-€94.15

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 series, Intake 255° 0.594" lift, Exhaust...

Fierce-performing camshaft for large and small displacements.
Improves torque band and horsepower across midrange and top end.
Requires supporting high-performance valve train and fuel/air upgrades.

€366.15 €460.30

Reaper® 594 Cam — 594 Series, Exhaust 260°, Intake 255°, Exhaust lift 0.604"/Intake lift 0.594"

-€87.64

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series, Exhaust 260°, Intake 255°,...

High-performance cam for 95"–124" engines; requires valvetrain, intake and exhaust upgrades.

€340.80 €428.44

HP+® Camchest Kit — Chain drive, 543 Series grind, intake & exhaust

-€420.76

FEULING OIL PUMP CORP. HP+® Camchest Kit — Chain drive, 543 Series grind, intake &...

Complete camchest rebuild kit for '99–'06 Twin Cam (except '06 Dyna). Includes all components for cooler temps, higher oil pressure and quieter operation.

€1,636.28 €2,057.04

-€420.76

FEULING OIL PUMP CORP. HP+® Camchest Kit — For '99-'06 Twin Cam, gear drive

Complete camchest rebuild kit for '99-'06 Twin Cam (except '06 Dyna). Increases oil pressure and flow, lowers engine and oil temps, reduces blow-by, and includes all bearings, gaskets and hardware for installation.

€1,636.28 €2,057.04

HP+® Camchest Kit — Gear drive, '07–'17 Twin Cam, '06 Dyna

-€420.76

FEULING OIL PUMP CORP. HP+® Camchest Kit — Gear drive, '07–'17 Twin Cam, '06 Dyna

Complete camchest rebuild kit that improves oil flow, raises oil pressure, reduces engine and oil temperatures, and smooths operation. Fits '07–'17 Twin Cam and '06 Dyna.

€1,636.28 €2,057.04

HP+® Camchest Kit — '07–'17 Twin Cam, '06 Dyna

-€420.76

FEULING OIL PUMP CORP. HP+® Camchest Kit — '07–'17 Twin Cam, '06 Dyna

Complete HP+® camchest kit for '07–'17 Twin Cam and '06 Dyna that increases oil pressure, lowers engine and oil temps, and smooths operation.

€1,636.28 €2,057.04

HP+® Camchest Kit — Gear drive, fits '07-'17 Twin Cam, '06 Dyna

-€420.76

FEULING OIL PUMP CORP. HP+® Camchest Kit — Gear drive, fits '07-'17 Twin Cam, '06 Dyna

Complete HP+® camchest kit for '07-'17 Twin Cam and '06 Dyna. Improves oil pressure, scavenge and cooling for cooler, more reliable operation.

€1,636.28 €2,057.04

-€94.15

FEULING OIL PUMP CORP. Reaper Camshaft — 543 Series, Exhaust 248°, Intake 238°

Bolt-in performance camshaft that improves throttle response and fuel mileage while delivering a smooth cruise power band. Fits stock to mid 96" and 103" engines; works well in 88" and 96" engines. Made in the USA.

€366.15 €460.30

-€94.15

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series grind, Exh 260°/Int 255°

Fierce-performing camshaft for large 103", 110" and 124" engines and high-revving 95" engines; requires supporting valvetrain and fueling upgrades.

€366.15 €460.30

-€57.28

S&S CYCLE H-Grind Camshaft — H grind, gear type

OEM hydraulic replacement camshaft for '48–'84 Big Twins. Ideal for restoration of 74" and 80" engines. Available for generator and alternator engine variations.

€222.75 €280.03

-€57.28

S&S CYCLE H-Grind Camshaft — Gear, fits 74" and 80" engines

OEM-spec hydraulic camshaft, a dead-on reproduction of the '48–'84 Big Twins cams; ideal for restoring 74" and 80" engines.

€222.75 €280.03

-€213.10

S&S CYCLE 583G Gear Drive Camshaft Kit — 583 Series grind

Reverses rear cam rotation for increased cam lift potential and improved valve timing accuracy. Professional installation required; cam bearings and gaskets must be replaced.

€828.74 €1,041.84

-€94.15

FEULING OIL PUMP CORP. Reaper® 630 Cam — 263° exhaust, 258° intake, 39° overlap

Performance camshaft requiring supporting intake, exhaust and valvetrain upgrades.

€366.15 €460.30

-€112.20

S&S CYCLE MR103 Easy Start Camshaft Kit — S&S Cycle, Chain

Bolt-in camshaft kit for 103" engines that eases starting by temporarily reducing compression, then returns to full compression. Improves midrange power (best 2500–5500 rpm). Includes camshafts and all necessary gaskets, bearings and hardware. Installer must verify coil bind and clearances.

€436.38 €548.58

635 H.O. Chain Drive Camshaft Kit — 635HO grind, Chain, Raw finish

-€86.79

S&S CYCLE 635 H.O. Chain Drive Camshaft Kit — 635HO grind, Chain, Raw...

High-lift camshaft for modified engines with 106"+ displacement and 10.0:1–11.0:1 compression.

Not a bolt-in kit; professional installation required.

Kit contains camshafts, bearings, gearcover gasket, retaining ring, o-ring, thread lock and instructions.

Installer must verify coil bind and clearances. Made in the USA.

€337.57 €424.36

-€104.59

FEULING OIL PUMP CORP. Reaper® 580 Cam — 580 Series grind, gear set

Increases horsepower and shifts the powerband higher in the rev range. High-flow intake and exhaust required; most cam compartments will need machining.

€406.75 €511.34

-€8.89

EASTERN MOTORCYCLE PARTS Cam Drive Sprocket Spacers — 0.120" spacer, 5-pack

Precision sprocket spacers to restore chain alignment. Made in the U.S.A.

€25.11 €34.00

-€8.89

EASTERN MOTORCYCLE PARTS Cam Drive Sprocket Spacers — 0.130", 5-pack

Precision spacers that improve drivetrain alignment and durability. Made in the U.S.A.

€25.11 €34.00

-€8.89
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Drive Sprocket Spacers — 0.140", 5-pack

Durable spacers for cam drive sprockets that maintain chain alignment and extend component life.

€25.11 €34.00

$Cam Drive Sprocket Spacers — 0.150\", 5-pack$

-€8.89

EASTERN MOTORCYCLE PARTS Cam Drive Sprocket Spacers — 0.150\", 5-pack

Precision-machined spacers that ensure correct cam drive sprocket alignment and reduce wear. Made in the U.S.A.

€25.11 €34.00

-€192.09

S&S CYCLE 475G Camshaft Kit — 107–135 cu in, Chrome

Bolt-in cam kit for 2200–5200 RPM performance; boosts horsepower past 100. Compatible with compression ratios up to 11.0:1. Includes bearings, o-rings, and hardware. No tuning required.

€747.05 €939.14

-€62.84

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, gear, exhaust and intake

More power than 525 cams without losing low-end torque
Smooth cam lobe layout for a quiet valve train and smooth cruise power
Bolt-in for stock to mid 96" and 103" engines; works well in 88" and 96" engines
Easy starting, improved throttle response and better fuel mileage
1900–6000 RPM power range
Made in the USA

€244.35 €307.19

-€62.84

FEULING OIL PUMP CORP. Reaper® 594 Cam — 255° intake, 260° exhaust, 0.594" lift

Fierce-performing camshaft suited to a wide range of V-twin engines.

Requires supporting valvetrain, intake/exhaust and clutch upgrades.

€244.35 €307.19

-€93.94

S&S CYCLE HP103 Camshaft Kit — 249°/251° duration, 0.575" lift

Bolt-in cam kit for 103" engines; strong midrange power (3,000–6,000 rpm). Requires high-lift valve springs. Made in USA.

€365.33 €459.27

MR103 Easy Start Camshaft Kit — 103" engine, fits 9.7:1–10.5:1 compression

-€240.61

S&S CYCLE MR103 Easy Start Camshaft Kit — 103" engine, fits 9.7:1–10.5:1...

Bolt-in MR103 camshaft kit for 103" engines (9.7:1–10.5:1). Easier starting, full compression at speed. Includes hardware and instructions.

€935.67 €1,176.28

-€314.51
Out of Stock

S&S CYCLE MR103 Cam Kit — Intake 226°, Exhaust 252°

Bolt-in camshaft kit for 103" engines. Increases power across the rpm range, with best results from 2500–5500 rpm. Made in the USA.

€888.84 €1,203.35

Hydraulic Cam Chain Tensioner Assembly — fits '07–'17 Feuling, factory & SE camplates; conversion for early '99–'06 camshafts, o

-€16.41

FEULING OIL PUMP CORP. Hydraulic Cam Chain Tensioner Assembly — fits '07–'17 Feuling,...

Direct stock replacement for Feuling and compatible camplates, single-piston design, ARP® 12-point hardware, made in USA.

€63.82 €80.23

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine