Engine (3)

Head Bolt/Washer Kit — 3.374 in bolts, 0.100 in washers, fits 88", 95", 100", 106", 107", 110", 111" motors

-€34.28

S&S CYCLE Head Bolt/Washer Kit — 3.374 in bolts, 0.100 in washers, fits...

For use with S&S Twin Cam-style heads. Includes 8 × 3.374" head bolts and 8 × 0.100" washers. Fits 88", 95", 100", 106", 107", 110", 111" motors. Made in the USA.

€133.27 €167.55

-€95.89

ANDREWS Cams for Gear Drives — 54 Series gear drive cam set, pair

Computer-designed alloy-steel cams for gear drives. Four-gear set required; installer must verify clearances.

€372.91 €468.80

-€142.02

S&S CYCLE Billet Cam Cover Kit — Polished

Machined 6061 billet aluminum cam cover kit with polished or chrome finish and chrome-plated points cover.

€552.30 €694.32

-€51.96

ANDREWS A2 Grind Cam — Exhaust 248° / Intake 242°

Fits 1966–1984 Big Twin engines (except 1980–1981). Increases mid-range and top-end power; idle is unaffected. Check spring travel and clearances on 1980+ models.

€202.08 €254.04

-€1,212.13

S&S CYCLE Top End Kit — 74 cu in, 3-7/16" bore, 8.0:1 compression

Complete S&S top-end kit with heads, pre-fit forged pistons, and all necessary hardware for quick installation.

€3,425.64 €4,637.77

A2 Grind Cam — Fits 1966–1984 Big Twin (except 1980–1981)

-€44.64

ANDREWS A2 Grind Cam — Fits 1966–1984 Big Twin (except 1980–1981)

Bolts into 1966–1984 Big Twin engines (except 1980–1981); increases mid- and high-rpm power while preserving idle.

€173.65 €218.29

-€723.44

S&S CYCLE Top End Kit — 3-1/2" bore, 80", 8.0:1

Complete top-end kit with S&S Shovelhead-style heads, stock-bore cylinders, pre-fit forged pistons, hardware and gaskets. Made in USA.

€2,813.38 €3,536.82

B2 Grind Cam — Andrews, B2 grind, Gear type

-€51.96

ANDREWS B2 Grind Cam — Andrews, B2 grind, Gear type

More mid-range and high-end power for street/strip with a smooth idle; ideal for 74/80-inch and small stroker engines.

€202.08 €254.04

-€419.97

S&S CYCLE 91 cc Super Stock® Cylinder Heads — Powder-Coated Wrinkle Black

Designed for S&S® T-Series T2 long block engines for Harley Davidson® big twins
2.000" intake and 1.605" exhaust valves with S&S® ports
S&S® high performance valve springs support cam lift up to .650"
Compatible with stock rocker boxes, exhaust, and intake manifolds
Requires S&S valve cover gasket kit; not machined for compression releases

€1,633.25 €2,053.22

-€51.96

ANDREWS B2 Grind Cam — Gear, Intake 256°, Exhaust 258°

Best cam for 74/80 inchers and small strokers; delivers strong mid and high-end power with a smooth idle. Spring spacing and main bearing boss clearance must be checked.

€202.08 €254.04

4-1/8" Bore Cylinder — 4.125" bore, 4.625" stroke, for '99-'17 Twin Cams, Black powder-coated

-€213.62

S&S CYCLE 4-1/8" Bore Cylinder — 4.125" bore, 4.625" stroke, for '99-'17...

Bored slightly under nominal and supplied un-honed with a stock bolt pattern; made for 124" Hot Set Up Kits on '99-'17 Twin Cams. Requires crankcase machining.

€830.76 €1,044.38

-€51.96

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust

Great street cam for 84–88-inch strokers; upgraded from the #6 grind with strong torque from 2,200–6,500 rpm.

€202.08 €254.04

7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open, 29° intake open

-€51.96

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open,...

Great street cam for 84/88-inch strokers; upgraded replacement for the #6 grind, boosting torque from 2,200–6,500 rpm.

€202.08 €254.04

-€6.94

S&S CYCLE Oil Filter Fitting — Steel, Straight fitting

Compact connector for oil filter installation; provides reliable sealing and easy maintenance.

€19.66 €26.60

450S Cam — Intake 236°, Exhaust 238°, Lift 0.475"

-€57.28

S&S CYCLE 450S Cam — Intake 236°, Exhaust 238°, Lift 0.475"

Dyno-tested S&S 450S cam delivering good low and mid-range torque. Bolt-in for lower compression motors up to 8.5:1. Recommend hydraulic lifters. Made in USA.

€222.75 €280.03

-€111.01

S&S CYCLE Billet Tappet Guides — Kit, Chrome

Precision-machined replacement set for stock-style crankcases; sold in pairs; made in the U.S.A.

€431.74 €542.75

-€111.66

S&S CYCLE Piston Kit for Super Stock® Heads — 80 cu in, Bore 3.500 in

For S&S® Super Stock® Heads only. Kit includes pistons, rings, wrist pins, and circlips. Made in the USA.

€434.24 €545.90

Piston Kit for Super Stock® Heads — 80", 3.500" bore, 4.250" stroke

-€114.09

S&S CYCLE Piston Kit for Super Stock® Heads — 80", 3.500" bore, 4.250"...

Complete piston kit for S&S® Super Stock® Heads; includes pistons, rings, wrist pins, and circlips. Deck height 1.3750" for 80" engine. Made in the USA.

€443.67 €557.76

-€121.44

S&S CYCLE 570 Easy Start Camshaft Kit — 570 Series grind, Chain

Temporarily reduces crank compression for easier starts, bolt-in kit that increases power from 3200–5700 rpm; includes camshafts and hardware. Installer must verify clearances. Not for models with OEM compression releases.

€472.27 €593.71

-€112.20

S&S CYCLE 585 Easy Start Camshaft Kit — 88–124 CID, 585 Series grind

Easy-start camshaft kit for select 88–124 CID engines. Bolt-in installation; includes required hardware. Installer must verify clearances.

€436.38 €548.58

-€222.31

S&S CYCLE 551 Easy Start Camshaft Kit — Easy Start, Gear

Easy-start camshaft kit that reduces compression at startup for easier cranking; bolt-in for stock or mildly modified Touring models. Includes camshafts and installation hardware. Not for models with OEM compression releases.

€864.53 €1,086.84

-€240.61

S&S CYCLE 585 Easy Start Camshaft Kit — 585 Series grind, gear type

Eases cold starts by reducing starting compression; bolt-in kit with all required hardware. Not for models with OEM compression releases.

€935.67 €1,176.28

-€99.53

S&S CYCLE Piston Kit 80" Stock Big Twin — 80", 3.530", 4-1/4"

Forged piston kit for stock Big Twin motors; includes pistons, rings, wristpins, and clips. Made in the U.S.A.

€387.03 €486.56

-€99.53

S&S CYCLE Forged 3-5/8" Bore Piston Kit — 3.625" bore, standard

Forged pistons for superior strength and durability.

Modern alloys and skirt profiles reduce noise and extend engine life.

Includes pistons, rings, wristpins, and clips.

€387.03 €486.56

-€91.87

S&S CYCLE Forged 3-5/8" Bore Piston Kit — +0.010" oversize

Forged pistons for superior strength; includes pistons, rings, wristpins and clips.

€357.27 €449.14

-€97.10

S&S CYCLE Forged 3-5/8" Bore Piston Kit — 3.645", +0.020"

Forged pistons for superior strength and long engine life; kit includes pistons, rings, wristpins, and clips.

€377.58 €474.68

-€99.53

S&S CYCLE Forged 3-5/8" Bore Piston Kit — Bore 3.655", Oversize +0.030"

Forged piston kit with modern alloys; includes pistons, rings, wristpins, and clips.

€387.03 €486.56

570C Camshaft Kit — 570 Series grind, Chain, Exhaust 255°, Intake 240°

-€93.94

S&S CYCLE 570C Camshaft Kit — 570 Series grind, Chain, Exhaust 255°,...

Designed for 88"–103" CID engines (9:1–10:1). Delivers strongest power from 3200–3700 rpm. Kit includes camshafts and installation components. Installer must verify clearances; requires high lift valve springs.

€365.33 €459.27

-€148.67

S&S CYCLE Piston Kit for Hot Set Up Kit® — Bore 4.125", 111/117/124 cu in

Complete piston kit with rings, wristpins, and clips. Made in the USA. Fits up to 4-5/8" stroke; deck height 1.050".

€585.33 €734.00

Piston Kit for Hot Set Up Kit® — Bore 4.125", Oversize +0.010", Deck height 1.050", Fits up to 4-5/8" stroke

-€143.22

S&S CYCLE Piston Kit for Hot Set Up Kit® — Bore 4.125", Oversize...

Complete set with forged pistons, rings, wristpins, and clips; made in the USA. Deck height 1.050", fits up to 4-5/8" stroke.

€556.97 €700.19

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine