Engine (23)

Race Series® Camchest Kit with Full Travel Lifters — Chain, 538 Series

-€524.39

FEULING OIL PUMP CORP. Race Series® Camchest Kit with Full Travel Lifters — Chain,...

Quieter, smoother engine operation with increased oil pressure and cooler running temperatures; full-travel hydraulic roller lifters and heavy-duty pushrods included.

€2,039.30 €2,563.69

Race Series® Camchest Kit with Short Travel Lifters — Chain, Kit, 538 Series

-€524.39

FEULING OIL PUMP CORP. Race Series® Camchest Kit with Short Travel Lifters — Chain,...

High-volume Race Series® camchest kit with short travel (0.115") hydraulic lifters. Increases oil pressure and scavenge volume, reduces wet sumping and valve float. Includes pump, camplate, camshaft, lifters, pushrods, bearings, hardware and gaskets. Made in USA. Not for '23-'24 121" VVT models.

€2,039.30 €2,563.69

HP+ Hydraulic Cam Chain Tensioner Conversion Kit — factory style camshaft

-€280.39

FEULING OIL PUMP CORP. HP+ Hydraulic Cam Chain Tensioner Conversion Kit — factory...

Converts early '99–'06 spring-tensioner cam-chain systems to the late '07–'17 hydraulic design. Includes billet oil pump, high-flow camplate, lifters, tensioner housings, chains, sprockets, bearings, gaskets and installation hardware. Rocker box gasket kit included to reuse factory one-piece pushrods. Made in USA.

€1,090.69 €1,371.08

-€86.39
Out of Stock

S&S CYCLE Camshaft 474C — 330-0293

Bolt-in OES camshaft that maintains stock timing; no tuning required.

€336.65 €423.04

-€213.10

S&S CYCLE 570G Camshaft Kit — 88–103 CID, gear drive

High-performance camshaft kit for 88–103 CID engines that improves valve timing accuracy and boosts performance around 3200–3700 rpm. Professional installation required.

€828.74 €1,041.84

-€213.10

S&S CYCLE 585G Gear Drive Camshaft Kit — Gear, 585 Series, S&S CYCLE

Gear-drive camshaft kit for 88–110 cu in engines; increases timing accuracy and enables higher lifts. Requires inner cover material removal, a hydraulic press and professional installation.

€828.74 €1,041.84

-€167.70

S&S CYCLE Generator Engine Case Gear Kit — 33-4226, Engine Case, Raw

Includes circuit breaker drive gear, idler gear assembly and circuit breaker shaft gear with shims. Shaft parts sold separately. Made in the U.S.A.

€652.17 €819.87

-€102.96

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€291.05 €394.01

-€2.60

EASTERN MOTORCYCLE PARTS Cam Shims — 0.007", 10 pack

Precision shims for accurate cam end play setup. A must when setting up new cams. Made in the USA.

€7.35 €9.95

-€9.32

EASTERN MOTORCYCLE PARTS Cam Bushing — Standard, Cam Cover

High-quality OEM cam bushing; made in the USA. Precision fit for reliable valve train performance.

€26.35 €35.67

-€4.69

EASTERN MOTORCYCLE PARTS Cam Gear Thrust Washers — 0.050"

Absorbs axial loads on the camshaft; precision machined and made in the USA.

€13.30 €17.99

Cam Gear Thrust Washers — 0.075", 5 pack

-€4.69

EASTERN MOTORCYCLE PARTS Cam Gear Thrust Washers — 0.075", 5 pack

Absorbs axial camshaft loads; precision machined and made in the USA.

€13.30 €17.99

Cam Gear Thrust Washers — 0.080" thickness, 5 Pack

-€4.69

EASTERN MOTORCYCLE PARTS Cam Gear Thrust Washers — 0.080" thickness, 5 Pack

Precision-machined thrust washers that absorb axial camshaft loads and reduce wear.

€13.30 €17.99

-€12.53
Out of Stock

JIMS Pinion Shaft Bushing — 1.0035", PN 25582-54/73

Quality pinion shaft bushing. Made in the U.S.A.

€48.70 €61.23

Idler Gear & Circuit Breaker Bushings — fits '36-'69 Big Twin, '32-'73 45"

-€5.71
Out of Stock

EASTERN MOTORCYCLE PARTS Idler Gear & Circuit Breaker Bushings — fits '36-'69 Big Twin,...

Circuit breaker and idler gear bushings for '36-'69 Big Twin
Idler gear bushings for '32-'73 45"
Made in the USA

€16.17 €21.88

-€14.11

JIMS Circuit Breaker Shaft Kit — JIMS, 25856-KIT

Includes a shaft and two replacement bushings; restores circuit breaker operation. Manufactured in the United States.

€54.90 €69.01

-€24.91

S&S CYCLE Pinion Gear — 1.4737"–1.4745"

High-quality pinion gears: carefully machined, heat-treated and finish-ground. Made in the USA.

€96.90 €121.81

Retaining Ring — 4 Speed, Third Gear Main Shaft, Silver

-€2.59

EASTERN MOTORCYCLE PARTS Retaining Ring — 4 Speed, Third Gear Main Shaft, Silver

High-quality OEM replacement component for reliable performance and precise fit.

€7.33 €9.92

-€29.28

S&S CYCLE Pinion Gear — 1.4470"–1.4475"

Precision-machined, heat-treated and finish ground pinion gear for reliable performance. Made in the USA.

€113.84 €143.12

-€24.91

S&S CYCLE Pinion Gear — 1.4715"–1.4721"

Precision-machined and finish-ground pinion gear. Made in the USA.

€96.90 €121.81

Motor Sprocket Shaft Spacer Kit — 0.366–0.666 in, 8-pack

-€29.50

JIMS Motor Sprocket Shaft Spacer Kit — 0.366–0.666 in, 8-pack

Eight-piece spacer kit machined to a 32-micron, burr-free finish for extended seal life; fits the sprocket shaft oil seal.

€114.73 €144.23

Cam Cover Bushing — 1.0035" diameter, bronze

-€8.74
Out of Stock

JIMS Cam Cover Bushing — 1.0035" diameter, bronze

Precision machined cam cover bushing with .0002" tolerance and installation lead-in. Made in the U.S.A.

€33.99 €42.73

$Cam Cover Bushing — 0.9405\" bronze$

-€14.25

JIMS Cam Cover Bushing — 0.9405\" bronze

Precision machined cam cover bushing with lead-in for easy installation. Made in the U.S.A.

€40.18 €54.43

-€94.63

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€94.63

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

Cams for Gear Drives — 26 Series grind, Intake 226°/0.490", Exhaust 266°/0.490"

-€95.89

ANDREWS Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...

Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.

€372.91 €468.80

-€85.84

ANDREWS Cam Set for Chain Drive — Chain Drive, 60 Series, Pair

Computer-assisted cam design built from alloy steel billets and heat-treated for durability. Made in the USA; installer must verify coil bind and clearance specifications before final installation.

€333.84 €419.68

514 Camshaft — 514 Series, 246° duration

-€57.28

S&S CYCLE 514 Camshaft — 514 Series, 246° duration

S&S 514 camshaft optimized for mid-range response; dyno, street and track tested. Fits 84"–93" motors; recommend high-performance hydraulic or solid lifters.

€222.75 €280.03

-€44.64

ANDREWS EV72 Cam — fits 92" or larger street motors

High-performance EV72 Cam for 92"+ street motors. Broad 2800–6000 rpm powerband; compatible with hydraulic lifters; made in USA.

€173.65 €218.29

-€57.28

S&S CYCLE 520 Camshaft — 520 Series grind, 0.520" lift, 232°/220° duration

Dyno- and track-tested cam offering strong low- to mid-range power for 80"–96" motors. Compatible with hydraulic tappets; requires high-lift springs. Made in USA.

€222.75 €280.03

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine