Engine (17)

-€264.34

FEULING OIL PUMP CORP. Race Series® Oil System Kit — 7072ST, Aluminum, Red, Natural

FEULING® OE+ billet oil pumps provide increased oil pressure and scavenge volumes as a stock replacement; made in the USA and compatible with specified Feuling cam grinds using short-travel pushrods.

€1,028.05 €1,292.39

-€266.28

FEULING OIL PUMP CORP. Race Series® Oil System Kit — Chain Drive, Aluminum, Red, Natural

OE+ stock replacement billet oil pumps increase oil pressure and scavenge return volumes; assembles without O-rings for reliable stock replacement performance.

€1,035.57 €1,301.85

Race Series® Oil System Pack — 7075ST, Aluminum

-€264.34

FEULING OIL PUMP CORP. Race Series® Oil System Pack — 7075ST, Aluminum

Complete kit to finish your engine oiling system—improves oil pressure, reduces temps and delivers measured power gains.

€1,028.05 €1,292.39

-€264.34

FEULING OIL PUMP CORP. Race Series® Oil System Pack — Kit, Chain drive, Aluminum, Red

Complete kit that increases oil pressure and flow, lowers oil and engine temperatures, eliminates wet sumping and blowby, and delivers measurable rear-wheel power gains.

€1,028.05 €1,292.39

-€307.02

FEULING OIL PUMP CORP. Race Series® Oil System Packs For M8 — Red

Complete Race Series® oil system pack for M8; increases oil flow, scavenge volume and oil pressure, reduces engine and oil temperatures, and includes pump, lifters, high-flow camplate and installation kit.

€1,193.98 €1,501.00

-€307.02

FEULING OIL PUMP CORP. Race Series® Oil System Packs For M8 — Kit, Red

Improves oil flow and scavenge volume for M8 engines, lowers engine and oil temperatures, and increases oil pressure. Includes pump, hydraulic lifters, high-flow camplate and installation kit. Made in the USA.

€1,193.98 €1,501.00

-€326.92

FEULING OIL PUMP CORP. HP+® Oiling System/Camchest — chain-drive kit

Freshen up the camchest and oiling system on late-model Twin Cam engines. Kit upgrades pump, lifters, chains, bearings, and hardware.

€1,271.39 €1,598.31

Race Series® Camchest Kit — for '07–'17 chain drive Twin Cam engines

-€512.01

FEULING OIL PUMP CORP. Race Series® Camchest Kit — for '07–'17 chain drive Twin Cam...

Complete camchest refresh kit for '07–'17 chain drive Twin Cam engines; includes high-volume oil pump, high-flow cam plate, full-travel lifters, chains, bearings, gaskets and hardware.

€1,447.02 €1,959.03

-€45.29

CUSTOM CYCLE ENGINEERING Adjustable Front Engine Bracket — Front, Anodized aluminum

Custom slotted bracket with alignment hash marks at 0.05" intervals.

Slides the engine left or right for precise alignment like FXR and early FLT models.

€128.00 €173.29

-€6.09

JAMES GASKET Float Bowl Gasket — 10 Pack, Paper

Replacement gasket for the carburetor float chamber; reliable sealing and easy installation. Made in the U.S.A.

€20.72 €26.81

-€116.83
Out of Stock

CUSTOM CYCLE ENGINEERING Top Stabilizer Link — Top mount, Black, Kit

Adjustable rubber-isolated link that reduces vibration, aligns the powertrain, and replaces the rigid stock metal-to-metal connection.

€330.22 €447.05

T143 Top Engine Mount Bracket — zinc finish

-€19.57

S&S CYCLE T143 Top Engine Mount Bracket — zinc finish

Fits stock chassis; CNC-machined B3 cylinder heads; Super Stock™ T2 crankcases; TC3 oil pump; 10.5:1 compression.

€76.13 €95.70

-€8.49

JAMES GASKET Replacement Washers — inner mounting position, chain cover

Durable replacement washers for reliable fit and long service life. Made in the U.S.A.

€28.86 €37.35

-€98.34

CUSTOM CYCLE ENGINEERING Engine Equator II — front mount, black

Corrects chassis misalignment for Dresser bikes; billet bracket replaces forged front bracket, includes slotted bolt pattern and adjustable stabilizing link. Made in the U.S.A.

€382.42 €480.76

-€119.82

CUSTOM CYCLE ENGINEERING Dyna Motor Mount — Front mount, Black

Replaces inadequate stock mounts to improve stability and reduce vibration. Made in the U.S.A.

€465.94 €585.76

-€142.63

CUSTOM CYCLE ENGINEERING Dyna Motor Mount — Rear mount, Black

Replaces inadequate stock mounts and improves stability. Made in the U.S.A.

€554.69 €697.32

-€87.27

CUSTOM CYCLE ENGINEERING Top Stabilizer Link — Top mount, Black

Adjustable rubber-isolated stabilizer link reduces engine vibration, aligns the power train, and replaces the stock metal-to-metal link.

€339.35 €426.62

-€2.17

JAMES GASKET Exhaust Gaskets — Crossover

High-quality exhaust port gaskets. Made in the USA by James Gaskets. Available in dealer packs of 2, 5, or 10.

€7.39 €9.56

-€7.28

S&S CYCLE Pinion Shaft Gear Nut — fits '90-'99 engines, PN 33-4244

OEM-quality pinion shaft gear nut. Made in USA. Fits '90-'99 engines with S&S flywheels.

€28.39 €35.67

-€5.71

S&S CYCLE Intake Manifold Clamp — stainless steel, silver

3/4" wide, 0.020" thick clamp with curved 10-24 T-bolt and plated aircraft-style hex locknut; made in USA.

€22.18 €27.89

Rocker Cover Gasket Kit — For '99–'06 Big Twin Cam S&S Rocker Boxes, 6-bolt style

-€21.08

S&S CYCLE Rocker Cover Gasket Kit — For '99–'06 Big Twin Cam S&S Rocker...

Complete gasket and O-ring set for both rocker boxes. Complete kit, ready to install.

€82.98 €104.06

-€36.24

S&S CYCLE Flange Mount Intake Manifold — For Super G Carbs, Silver

Includes a map sensor port, matches OEM intake ports, and is made in the USA.

€140.95 €177.19

-€36.24

S&S CYCLE Flange-Mount Intake Manifold — For Super G Carbs, Silver

Replaces the stock compliance-fitting or rigid-mount manifold for '84-'99. Fits 5.5550" length cylinders; compatible with stock or S&S heads. Made in USA.

€140.95 €177.19

Complete Motor Gasket Kit — bore 3.875 in, thickness 1.17 mm

-€32.99

JAMES GASKET Complete Motor Gasket Kit — bore 3.875 in, thickness 1.17 mm

Contains gaskets, oil seals and O-rings required for a complete engine rebuild. Made in the USA.

€112.17 €145.16

-€126.22

S&S CYCLE Piston Kit 106" Stroker — 4-1/2" stroke, 3.875" bore, 10.1:1

Complete piston kit for S&S 106" stroker applications; includes forged pistons, rings, wrist pins and clips. Made in USA.

€490.89 €617.11

-€16.98

S&S CYCLE Replacement Ring Set for S&S Pistons — 3.875 in bore, flat-top

Replacement ring sets for S&S pistons; includes rings for two pistons. Made in the USA.

€66.03 €83.01

Pushrod Seal — 25 pack, Viton, oil type, cylinder head/pushrod cover

-€13.92

JAMES GASKET Pushrod Seal — 25 pack, Viton, oil type, cylinder head/pushrod...

Durable pushrod seal that helps prevent oil leaks and maintains engine performance.

€47.35 €61.27

Replacement Stainless Steel Valves for S&S Heads — 1.940" intake, 1.575" exhaust

-€16.18

S&S CYCLE Replacement Stainless Steel Valves for S&S Heads — 1.940"...

Stainless steel replacement intake and exhaust valves for S&S heads. Made in the USA.

€63.03 €79.21

-€16.98

S&S CYCLE Replacement Stainless Steel Valves for S&S Heads — 1.940"...

Precision replacement valves for S&S heads; restore sealing and performance.

€66.03 €83.01

$Derby/Inspection Cover Gasket Kit — Inspection Cover, 4-Speed, 1.60 mm (0.062\"), 5 Pack$

-€10.99

JAMES GASKET Derby/Inspection Cover Gasket Kit — Inspection Cover, 4-Speed,...

Genuine James Gaskets with Foamet® construction and silicone release coating for a positive seal and easy disassembly. Made in the USA.

€37.36 €48.35

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine