Engine (118)

V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

-€94.63

ANDREWS V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circles permit stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€2.99
Out of Stock

COLONY Front Fender Mounting Hardware Kit — Front, Parkerized

Includes four locktabs and four bolts. Made in the U.S.A.

€8.43 €11.42

Out of Stock

COMETIC Oil Pump Cover Gasket Set

The Oil Pump Cover Gasket Set is a reliable solution for maintaining your Harley-Davidson's engine efficiency. It ensures a perfect seal, preventing leaks and promoting optimal performance.

€8.11

-€2.74

KIBBLEWHITE Shouldered Cast Iron Valve Guide — 0.3745" ID, 1.855" length

Precision-machined shouldered valve guide compatible with no-lead fuel; accepts special seals (sold separately). Made in the USA.

€7.80 €10.54

Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

-€39.78

ANDREWS Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

Precision-ground cams for Big Twin that increase mid-range and top-end power. Works with solid or hydraulic lifters; check clearances before installation.

€154.70 €194.48

Rear Fender Mounting Hardware Kit — 5/16"-24, 3/8"-24, cadmium plated

-€6.12

COLONY Rear Fender Mounting Hardware Kit — 5/16"-24, 3/8"-24, cadmium...

Complete rear fender mounting hardware kit with bolts, screws, nuts, and lockwashers; made in the U.S.A.

€23.78 €29.90

Out of Stock

COMETIC Oil Pump Cover Gasket Set

The Oil Pump Cover Gasket Set is a reliable solution for maintaining your Harley-Davidson's engine efficiency. It ensures a perfect seal, preventing leaks and promoting optimal performance.

€8.38

Shouldered Cast Iron Valve Guide — Oversize (+0.001"), ID 0.3745", Length 1.910"

-€2.74

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.001"), ID...

Precision-machined valve guide compatible with unleaded fuel; accepts special seals (sold separately). Made in USA.

€7.80 €10.54

Out of Stock

ANDREWS Cam para Big Twin

Aumenta la potencia de tu moto con el Cam for Big Twin, diseñado para un rendimiento óptimo en el rango medio y alto. Fabricado en EE. UU., compatible con elevadores sólidos o hidráulicos.

€209.53

-€5.50

COLONY Rear Fender Mounting Hardware Kit — 5/16"-24, 3/8"-24, Cadmium...

Complete hardware kit for rear fender installation; includes bolts, screws, nuts and lockwashers. Made in the U.S.A.

€21.38 €26.88

Out of Stock

COMETIC Pushrod Cover Seals

Complete set of seals and O-rings for Pushrod Cover rebuilds.

€14.46

-€3.51

COLONY FX Dash Mounting Hardware Kit — Chrome finish

Complete chrome-plated dash mounting Allen button kit for secure, low-profile attachment.

€9.91 €13.42

Out of Stock

COMETIC Pushrod Cover Seals

Complete set of seals and O-rings for Pushrod Cover rebuilds.

€14.46

Shouldered Cast Iron Valve Guide — Inside diameter 0.3745", Length 1.910", Oversize +0.002", Special shouldered

-€2.60

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Inside diameter 0.3745",...

Precision-machined cast iron valve guide compatible with no-lead fuel and various valve-stem materials. Accepts special seals (sold separately). Made in the USA.

€7.38 €9.98

-€2.17

COLONY FX Dash Mounting Hardware Kit — Chrome, Button-head

Complete Allen-style dash mounting kit for FX models. Made in the USA.

€6.14 €8.31

Out of Stock

COMETIC Valve Guide Gasket

Valve Guide Gasket made in the U.S.A. ensures a reliable seal for optimal engine performance.

€10.51

Shouldered Cast Iron Valve Guide — 0.3745 in ID, 1.855 in L, Oversize +0.002 in

-€2.60

KIBBLEWHITE Shouldered Cast Iron Valve Guide — 0.3745 in ID, 1.855 in L,...

Precision-machined valve guide compatible with unleaded fuel; accepts special seals; made in USA.

€7.38 €9.98

Jiffy Stand Foot Clutch Lever Bracket Mounting Kit — Foot Lever, Black

-€5.50

COLONY Jiffy Stand Foot Clutch Lever Bracket Mounting Kit — Foot...

Includes three 3/8"-16 bolts, four 5/16" bolts, one nut, four 5/16"-24 nuts, and four lock washers. Made in the U.S.A.

€21.38 €26.88

Out of Stock

COMETIC O-ring

High-quality O-ring manufactured in the USA from premium fuel-resistant materials for long-lasting reliability.

€6.21

Shouldered Cast Iron Valve Guide — Oversize (+0.003"), ID 0.3745", Length 1.855"

-€2.74

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.003"), ID...

Precision-machined for consistent fit and durability. Compatible with unleaded fuel and all valve-stem materials. Accepts special seals (sold separately). Made in the USA.

€7.80 €10.54

Out of Stock

ANDREWS C Grind Cam

The C Grind Cam enhances mid-range and top-end power for street and drag bikes. Precision-engineered in the USA for reliable performance and broad torque range.

€168.09

Floorboard Hinge Bolt Kit — Shoulder (Pivot) bolts, Chrome

-€4.59

COLONY Floorboard Hinge Bolt Kit — Shoulder (Pivot) bolts, Chrome

Hinge bolt kit for floorboards — includes four shoulder bolts, four 1/4" flat washers, and four 1/4"-20 nylock nuts.

€12.99 €17.58

Out of Stock

COMETIC Primary O-Ring

High-quality Primary O-Ring designed for durability and long-term reliability, made from premium fuel-resistant materials in the U.S.A.

€6.00

Shouldered Cast Iron Valve Guide — Oversize (+0.004 in), 0.3745 in ID, 1.910 in length

-€2.88

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.004 in),...

Precision-machined cast iron valve guide; compatible with no-lead fuel; accepts special valve guide seals (sold separately); made in the USA.

€8.13 €11.01

Out of Stock

ANDREWS C Grind Cam

The C Grind Cam enhances mid-range and top-end power for street and drag bikes. Precision-engineered in the USA for reliable performance and broad torque range.

€168.09

Brake Stud Kit — Front, Shoulder (Pivot) fastener, Cadmium plated, Steel

-€7.96

COLONY Brake Stud Kit — Front, Shoulder (Pivot) fastener, Cadmium...

Includes components to service the front brake shoe: stud, washers, nut, and lockwasher.

€22.49 €30.45

Shouldered Cast Iron Valve Guide — Inside Diameter 0.3745 in, Length 1.910 in

-€2.68

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Inside Diameter 0.3745 in,...

Precision-machined shouldered valve guide designed for reliable alignment and compatibility with unleaded fuel. Accepts special seals (sold separately).

€7.60 €10.28

Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

-€44.64

ANDREWS Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

Increases mid-range and top-end power for street and drag bikes while keeping idle stable to 6,000 rpm. Works with solid or hydraulic lifters. Made in the USA. Check coil bind and clearances before installation.

€173.65 €218.29

-€1.83
Out of Stock

COLONY Rear Brake Rod and Cable Adjusting Nut — Hex nut, chrome

Precision fastener for fine adjustment and secure linkage connections. Made in the U.S.A.

€5.16 €6.99

Out of Stock

COMETIC Cylinder Head Gasket

A high-quality Cylinder Head Gasket designed for Harley-Davidson, featuring a stainless steel shim layer and Viton-coated outer layers for durability and performance.

€15.72

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine