TOOLS (5)

Timken® Bearing Race Installer — Crankcase, Left Side, Black, Silver

-€92.01

JIMS Timken® Bearing Race Installer — Crankcase, Left Side, Black,...

Installs bearing race straight into the left crankcase. A must for late-model cases. Made in the U.S.A.

€357.82 €449.83

-€18.62
Out of Stock

JIMS Piston Pin Keeper Tool — Black

Installs round circlip rings in one step without distorting the ring for secure wrist pin retention. Use to install piston retaining rings. Made in the U.S.A.

€72.41 €91.03

-€15.10

DRAG SPECIALTIES Oil Pump — 15–55 gal drums, air-operated

Air-operated oil pump compatible with 15–55 gal drums for quick, clean transfer.

€42.69 €57.79

Tappet Adjustment Tool — Hydraulic adjuster, Pushrod application, Blue, Silver

-€10.29

JIMS Tappet Adjustment Tool — Hydraulic adjuster, Pushrod...

Hand tool for verifying tappet adjustment. Confirms tip fit and endplay; not compatible with solid or limited-travel tappets. Made in the United States.

€40.05 €50.34

-€83.63
Out of Stock

JIMS Rocker Bushing Reaming Tool — Rocker Box, Silver

Precision line reamer for rocker bushings; reams to .0007"–.0012" for factory fit. Made in the U.S.A.

€325.25 €408.88

Cam and Pinion Gear Gauge Pins — 0.108" gauge, gray

-€10.64
Out of Stock

JIMS Cam and Pinion Gear Gauge Pins — 0.108" gauge, gray

Check pinion gear pitch diameters. Refer to the service manual for sizing. Made in the U.S.A.

€41.37 €52.01

-€87.98

JIMS Clutch Gear Puller — Main shaft, kick starter, 4-speed, bronze

Removes kick starter clutch gear without damage; made in the United States.

€342.10 €430.08

-€22.99
Out of Stock

DRAG SPECIALTIES Teardrop Toolbox — Right Side, Chrome

Authentic-looking teardrop toolbox reproducing early model styling; replacement keys and mounting brackets sold separately.

€64.98 €87.97

-€26.48

DRAG SPECIALTIES Teardrop Toolbox — Left side, Chrome

Beautiful reproduction of the original early-model toolbox. Replacement keys sold separately; mounting brackets not included.

€74.84 €101.32

-€29.80

JIMS Ignition Switch Housing Alignment Tool — Blue

Aligns ignition switch housing while tightening screws and positions the switch for proper fork lock engagement.

€115.91 €145.71

-€11.47

JIMS Spark Plug and O² Sensor Thread Chaser — M12 x 1.25, Black

Restores damaged spark plug and O² sensor I.D. threads. Three-flute design with generous lead-in pilot for smooth thread repair. Made in the USA.

€44.59 €56.06

Onboard Diagnostic Voltmeter — Black, Red

-€27.92
Out of Stock

JIMS Onboard Diagnostic Voltmeter — Black, Red

Attaches to the battery for quick diagnosis of charging system and battery issues; works with 6 V and 12 V systems. Made in the USA.

€108.57 €136.49

Drag Specialties Optimate 5 EU — 12 V, EU plug

-€19.06
Out of Stock

DRAG SPECIALTIES Drag Specialties Optimate 5 EU — 12 V, EU plug

Fully sealed 12V 4A charger and maintainer for lead-acid, AGM and gel motorcycle batteries. Diagnoses and recovers sulphated or deeply discharged batteries. IP54 rated; operable to -40°C.

€53.89 €72.95

-€26.60

JIMS Tire Air Pressure Gauge — 0–60 psi, Black

Records pressure until release button is engaged
Shock-resistant rubber-coated exterior
Made in the U.S.A.

€103.43 €130.03

Master Cylinder Hydraulic Brake Bleeding Solution — Silver, Front/Rear/Clutch kit

-€80.65
Out of Stock

JIMS Master Cylinder Hydraulic Brake Bleeding Solution — Silver,...

Vacuum-bleed kit with a transparent cap; includes five caps and gaskets. Vacuum pump not included. Made in the U.S.A.

€313.61 €394.26

-€17.43
Out of Stock

JIMS Master Cylinder Brake Bleeding Solution — Front brake, Silver

Transparent sealing cap that attaches to the master cylinder for a cleaner, low-fluid brake bleeding process. Vacuum pump not included.

€67.75 €85.18

-€32.42
Out of Stock

DRAG SPECIALTIES Manual Crimping Tool — Blue, Silver

Reliable tool for crimping battery cable terminals; crimps all standard-size terminals.

€91.61 €124.03

-€14.55

DRAG SPECIALTIES Transmission Sprocket Nut Wrench — Polished Chrome

Required for removing the transmission sprocket locknut; includes a 1/2" drive for ratchet or torque wrench.

€41.09 €55.64

-€88.46

JIMS 5-Speed Transmission Main Drive Gear Tool — 5-Speed, Black

Installs and removes the main drive gear without removing the transmission. Made in the USA.

€344.00 €432.46

Clutch Hub Puller — 10" stud, E84 Big Twin fit, Black

-€13.56

DRAG SPECIALTIES Clutch Hub Puller — 10" stud, E84 Big Twin fit, Black

Removes clutch hubs without removing the transmission end cover; 10" stud; fits E84 Big Twin models.

€38.32 €51.88

Primary Locking Bar — Primary Belt Drive, Primary Chain Drive, Black

-€9.57
Out of Stock

JIMS Primary Locking Bar — Primary Belt Drive, Primary Chain Drive,...

Immobilizes the primary drive for safe tightening and loosening during maintenance. Prevents rotor and magnet damage.

€37.23 €46.80

-€10.48
Out of Stock

JIMS Primary Locking Bar — Primary Belt Drive, Primary Chain Drive,...

Immobilizes the primary drive for secure maintenance. Enables torque-wrench tightening and breaker-bar loosening. Protects rotor and magnets. Made in the U.S.A.

€40.70 €51.18

-€5.71

DRAG SPECIALTIES Jumper Cable — 12-gauge, 183 cm (6'), Black, Red

Durable coating and rubber-encased grips for safer, more efficient jumps. 12-gauge cable.

€16.14 €21.85

-€20.26

JIMS O² Sensor Wrench — Black

Removes and installs O² sensors without removing exhaust pipes. 12 mm. Made in the USA.

€78.76 €99.02

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company