TOOLS (3)

Flywheel Puller Right Hand Internal Thread with M12 Cap — M28 x 1.0, black oxide

-€7.69

MOTION PRO Flywheel Puller Right Hand Internal Thread with M12 Cap — M28...

Heat-treated, high-carbon steel puller with right-hand internal thread and M12 cap. Laser-etched, hot black oxide finish and lifetime limited warranty.

€21.73 €29.42

Ultimate Clutch Adjusting Tool — Blue, Chrome, '85-'20 Big Twins

-€20.57

JIMS Ultimate Clutch Adjusting Tool — Blue, Chrome, '85-'20 Big Twins

Quickly and accurately tighten the clutch adjusting screw jam nut without moving the screw. Includes Allen wrench that stores in the handle. Made in the USA. Fits all '85-'20 Big Twins with mechanical clutch.

€79.99 €100.56

-€22.19

MOTION PRO Flywheel Puller Internal Thread — M50 x 1.5, Black oxide

Removes flywheel or rotor. Heat-treated for strength. Laser-etched identification. Includes crank protector. Right-hand thread. Durable corrosion-resistant finish. Lifetime limited warranty.

€62.68 €84.87

-€22.28

JIMS XL Sprocket Nut Socket Tool — Black

Short socket designed to remove, install and properly tighten the front final drive sprocket/pulley on Harley-Davidson® Sportster models; provides full contact to the nut.

€86.61 €108.89

Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon steel

-€7.62

MOTION PRO Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon...

Removes flywheels and rotors; includes 4 mm, 5 mm, and 6 mm hardware. Heat-treated, laser-etched, and backed by a lifetime limited warranty.

€21.56 €29.18

-€7.98

MOTION PRO Flywheel Puller — Internal thread, M28 x 1.0, Black oxide

Right hand internal-thread puller for removing flywheels or rotors; includes M14 cap and lifetime limited warranty.

€22.57 €30.55

Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black oxide

-€8.20

MOTION PRO Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black...

Precision right-hand internal-thread flywheel puller. Heat treated, laser etched, durable finish and lifetime limited warranty.

€23.18 €31.38

-€11.49

JIMS Primary Locking Bar — Primary (Drive), Black

Immobilizes the primary drive for safe maintenance; allows torque-wrench tightening or breaker-bar loosening. Made in the U.S.A.

€44.67 €56.16

-€3.60

MOTION PRO Oil Filter Removal Tool — Black, Silver

Conical point screw pierces and grabs the sheet metal end cap for easy removal of recessed KTM oil filters. Not for use on reusable filters.

€10.16 €13.76

Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS 5534, Chrome

-€4.45

JIMS Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS...

Correct-style Torx driver/socket for the compensating sprocket retaining fastener. Made in the USA.

€17.32 €21.77

Cylinder Torque Plate Kit — 3.75"–3.875" bore, black

-€158.86

JIMS Cylinder Torque Plate Kit — 3.75"–3.875" bore, black

Use these plates when boring or honing late-model aluminum cylinders to simulate running stress conditions. Includes instructions. Made in the U.S.A.

€617.77 €776.63

Flywheel Puller Right Hand Internal Thread — M38 x 1.5, black oxide

-€14.49

MOTION PRO Flywheel Puller Right Hand Internal Thread — M38 x 1.5, black...

Right hand internal thread flywheel puller; laser etched, heat treated, high carbon steel, durable finish, lifetime limited warranty.

€40.94 €55.43

-€15.23

MOTION PRO Deluxe Piston Pin Puller — Blue anodized

Removes piston pins from full skirt and short skirt (slipper) pistons. Fits pins 12 mm (1/2") to 24 mm (1"). Non-marring aluminum pin adapters and interchangeable piston adapters.

€43.05 €58.28

-€23.23

JIMS Replacement Drive — Cam, Black

Replacement drive for JIMS® cam bearing installation tool — durable, precision-fit component.

€90.38 €113.61

-€21.59

JIMS Pushrod Cover Clip — Pushrod, Black

Quick one-hand tool for installing and removing cover clips. Won't mar or slip. Made in the U.S.A.

€83.97 €105.56

Counter Balancer and Clutch Hub Spanner for Honda — 20 mm ID, 3/8" driver, 4-pin spanner

-€2.96

MOTION PRO Counter Balancer and Clutch Hub Spanner for Honda — 20 mm ID,...

Heat-treated 4-pin spanner for removing Honda counter balancer and clutch hub nuts. 20 mm ID, for use with a 3/8" driver.

€8.38 €11.34

Piston Ring Compressor Set — 47.6 mm–73 mm (1-7/8"–2-7/8"), Set of 4, Black

-€34.82

JIMS Piston Ring Compressor Set — 47.6 mm–73 mm (1-7/8"–2-7/8"),...

Precise ratcheting compressor that compresses piston rings in small increments without damaging them. Made in the U.S.A.

€135.41 €170.23

-€44.20

JIMS Dual Gauge Leakdown Tester — JIMS, Cylinder, 4-Stroke, Black

Dual-gauge design for quick leakdown diagnosis; detects valve-seat leaks, bad rings and head gasket failures.

€171.90 €216.10

-€10.56

JIMS Hydraulic Balancer Retainer Tool — Engine balancer, Silver

Holds hydraulic tensioners to maintain constant chain tension on counter balancer systems. Made in the U.S.A.

€41.03 €51.59

-€48.97

JIMS Mini Valve Spring Tester — Black, Blue

Compact tester for dual-rate and conical valve springs; fits up to 1.6" O.D.; 0–1000 P.S.I. gauge. Made in the U.S.A.

€190.44 €239.41

-€10.99

MOTION PRO Side Jaw Pincer Tool — Black, Blue

Compact side-jaw tool for installing Stepless® ear clamps in tight spaces.

€31.07 €42.06

-€9.19

JIMS Dipstick Removal Tool — Engine oil system, Gray

Safely removes engine oil dipsticks near hot exhausts; fits 3/8" ratchet and 7/8" wrench. Made in the U.S.A.

€35.75 €44.94

-€11.26

JIMS Slim Oil Filter Wrench — 14-flute, Silver

Exclusive slim design for easier access near the oil cooler and crankcase position sensor. More room to work around exhaust pipes, frame, hoses and brackets. Made in the U.S.A.

€43.80 €55.06

-€13.08

JIMS Mighty Bite Flywheel Lock and Tag — Blue

Secures the flywheel for service on Twin Cam motors; installs in place of the crank position sensor and includes a visible decommissioned tag.

€50.85 €63.93

$Piston Ring End Gap Tool — Fits H-D 95\", 103\", 110\" motors, 3.875\" or 4\" bore, blue anodized$

-€22.66

JIMS Piston Ring End Gap Tool — Fits H-D 95\", 103\", 110\" motors,...

Measures piston ring end gap quickly and accurately. Flanged design ensures a square fit in the bore. Fits H-D 95\", 103\", 110\" motors with 3.875\" or 4\" bore.

€88.13 €110.79

-€7.39

MOTION PRO Flywheel Puller with Thread Protector — M26 x 1.0, Black oxide

Professional puller for safe flywheel and rotor removal. Heat treated, laser-etched, includes thread protector and lifetime limited warranty.

€20.89 €28.28

Flywheel/Rotor Puller Internal Thread — M40 x 1.5, right-hand thread

-€13.31

MOTION PRO Flywheel/Rotor Puller Internal Thread — M40 x 1.5, right-hand...

Internal-thread design protects the crankshaft during rotor removal.
Laser-etched identification for easy tracking.
Heat treated and finished for durability; lifetime limited warranty.

€37.61 €50.92

Dowel Pin Puller Set — Engine case, black

-€22.44

MOTION PRO Dowel Pin Puller Set — Engine case, black

Compact kit with puller rod and slide hammer for stuck dowel pins. Includes 8 mm, 10 mm, 12 mm and 14 mm collets and a storage tray.

€63.43 €85.87

Tappet Position Holding Tool — Camshaft, Tappet, Black, Blue, Silver

-€19.21

JIMS Tappet Position Holding Tool — Camshaft, Tappet, Black, Blue,...

Protects and organizes tappets during camshaft service; stores pins and tappets for accurate reinstallation. Made in the U.S.A.

€74.70 €93.91

Crankcase Splitter V2 — Aluminum and steel, black and blue anodized

-€52.83

MOTION PRO Crankcase Splitter V2 — Aluminum and steel, black and blue...

Fast, easy-to-use crankcase splitter with 5 mm, 6 mm and 8 mm puller stud threads, captured retaining collars, grooved studs and molded storage tray.

€205.44 €258.27

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company